|
标准代号 |
标准名称（英文） |
标准名称（中文） |
|
A部分：螺纹 |
||
|
ANSI/ASME B1.7M 1984(R 2001) |
NOMENCLATURE，DEFINITIONS，AND LETTER SYMBOLS FOR SCREW THREADS |
螺纹的术语、定义和字母代号 |
|
ASME B1.1 2003 |
UNIFIED INCH SCREW THREADS(UN AND UNR THREAD FORM) |
统一英制螺纹(UN和UNR螺纹形状) |
|
ASME B1.3M 1992(R 2001) |
SCREW THREAD GAGING SYSTEMS FOR DIMENSIONAL ACCEPTABILITY－INCH SCREW THREADS(UN,UNR,AND UNJ) |
尺寸接受的螺纹测量系统 英制和米制螺纹（UN, UNR, 和UNJ） |
|
ANSI/ASME B1.2 1983(R 2001) |
GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS |
统一螺纹的量规和测量 |
|
ASME/ANSI B1.12 1987(R2003) |
CLASS 5 INTERFERENCE-FIT THREAD |
第5级过盈配合螺纹 |
|
ASME B1.15 1995 |
UNIFIED INCH SCREW THREADS(UNJ THREAD FORM) |
统一英制螺纹(UNR螺纹形状) |
|
B部分：材料和涂镀 |
||
|
IFI |
SELECTING FASTENER MATERIAL |
紧固件材料选择 |
|
IFI |
BOLT AND NUT COMPATIBILIITY |
螺栓和螺母的匹配 |
|
IFI |
CORROSION |
腐蚀作用 |
|
IFI |
PLATINGS AND COATINGS |
镀层和涂层 |
|
IFI-140 2000 |
CARBON AND ALLOY STEEL WIRE,RODS,AND BARS FOR MECHANICAL FASTENERS |
用于机械紧固件的碳素钢和合金钢的线材，圆钢，钢棒 |
|
SAE J429 1999 |
MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS |
外螺纹紧固件的机械和材料要求 |
|
ASTM A307 2004 |
Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength |
碳素钢外螺纹紧固件 |
|
ASTM A449 2004b |
Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
经淬火和回火的钢制螺栓和螺柱 |
|
ASTM A320/A320M-2005a |
ALLOY STEEL BOLTING MATERIALS FOR LOW TEMPERATURE SERVICE |
低温用合金钢和不锈钢螺栓材料 |
|
ASTM A193/A193M-2006 |
Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications |
高温高压用合金钢和不锈钢螺栓材料 |
|
ASTM A194/A194M-2006b |
CARBON AND ALLOY STEEL NUTS FOR BOLTS FOR HIGH PRESSURE OR HIGH TEMPERATURE SERVICE,OR BOTH |
高压或高温作业或者高压高温作用用螺栓的碳钢和合金钢螺母 |
|
ASTM A354-2004
|
QUENCHED AND TEMPERED ALLOY STEEL BOLTS,STUDS,AND OTHER EXTERNALLY THREADED FASTENERS |
淬火和回火合金钢螺栓、双头螺栓和其它外螺纹紧固件 |
|
ASTM F593-2002e2 |
STAINLESS STEEL BOLTS,HEX CAP SCREWS,AND STUDS |
不锈钢螺栓、六角帽螺钉和柱头螺栓 |
|
ASTM F468-2006 |
NONFERROUS BOLTS,HEX CAP SCREWS,AND STUDS FOR GENERAL USE |
普通有色金属螺栓、六角帽螺钉和螺柱 |
|
ASTM A563-2004a |
CARBON AND ALLOY STEEL NUTS |
碳素钢和合金钢螺母 |
|
ASTM F594 2002 |
STAINLESS STEEL NUTS |
不锈钢螺母 |
|
ASTM F467-2006 |
NONFERROUS NUTS FOR GENERAL USE |
通用非金属螺母 |
|
ASTM F788/F788M-2006 |
Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series |
螺栓、螺钉和螺栓表面缺陷 |
|
ASTM F812/F812M-2003 |
Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series |
螺母表面缺陷 |
|
ASTM F606-2006 |
TEST METHODS FOR DETERMINING THE MECHANICAL PROPERTIES OF EXTERNALLY AND INTERNALLY THREADED FASTENERS,WASHERS,AND RIVETS |
测定外螺纹和内螺纹紧固件、垫圈及铆钉机械性能的试验方法 |
|
ASTM B633-1998e1 |
ELECTRODEPOSITED COATINGS OF ZINC ON IRON AND STEEL |
钢铁表面电解沉积锌镀层 |
|
ASTM A153/A153M-2005 |
ZINC COATING(HOT-DIP)ON IRON AND STEEL HARDWARE |
钢铁构件镀锌层（热浸） |
|
ASTM B695-2004 |
COATINGS OF ZINC MECHANICALLY DEPOSITED ON IRON AND STEEL |
钢铁表面锌机械沉积镀层 |
|
ASTM B696-2000(2004)e1 |
COATINGS OF CADMIUM MECHANICALLY DEPOSITED |
镉机械沉积锌镀层 |
|
ASTM B766-1986(2003) |
ELECTRODEPOSITED COATINGS OF CADMIUM |
镉电沉积镀层 |
|
ASTM F1135-1999(2004) |
CADMIUM OR ZINC CHROMATE ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS |
紧固件用铬酸镉或锌有机防蚀镀层 |
|
ASTM F1136-2004 |
CHROMIUM/ZINC CORROSION PROTECTIVE COATINGS FOR FASTENERS |
紧固件用铬/锌防蚀镀层 |
|
ASTM F1137 2000 |
PHOSPHATE/OIL AND PHOSPHATE/ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS |
紧固件用磷酸盐/油和磷酸盐/有机防蚀镀层 |
|
ASTM F1941-2000 |
ELECTRODEPOSITED COATINGTS ON THREADED FASTENERS [UNIFIED INCH SCREW THREADS(UN/UNR)] |
螺纹紧固件上电镀层[统一英寸制螺纹（UN/UNR）] |
|
C部分：螺栓、螺钉和螺柱 |
||
|
ASME B18.2.1 1996 |
SQUARE AND HEX BOLTS AND SCREWS(INCH SERIES) |
正方型和六角型螺栓和螺钉(英制系列) |
|
IFI-149 2000 |
LARGE SIZE HEAVY HEX SCREWS |
大规格大六角螺钉 |
|
IFI-111 2002 |
HEX FLANGE SCREWS |
六角法兰螺钉 |
|
IFI-115 2002 |
FLANGE 12-POINT SCREWS |
12角法兰螺钉 |
|
ASME B18.5-1990(R2003) |
ROUND HEAD BOLTS |
圆头螺栓 |
|
ASME B18.9-1996(R2003) |
PLOW BOLTS(INCH SERIES) |
防松螺栓 |
|
ANSI/ASME B18.10 1982(R 2000) |
Track Bolts and Nuts |
轨道螺栓和螺母; |
|
ASME B18.15-1985(R2003) |
FORGED EYEBOLTS |
锻造环眼螺栓 |
|
IFI-136 2002 |
STUDS AND BENT BOLTS |
螺柱和螺栓 |
|
ASME B18.6.2 1998 |
Slotted Head Cap Screws |
开槽平头螺钉 |
|
IFI-148 2002 |
THREADED PROJECTION WELD STUDS |
焊接螺柱 |
|
D部分：螺母 |
||
|
IFI |
Commentary ON NUTS |
螺母的解释和说明 |
|
ASME/ANSI B18.2.2 1987(R 1999) |
SQUARE AND HEX NUTS |
方型和六角螺母 |
|
IFI-145 2002 |
HEX FLANGE NUTS AND LARGE HEX FLANGE NUTS |
六角法兰螺母和大规格六角法兰螺母 |
|
IFI-128 2000 |
HEX COUPLING NUTS |
六角轴接螺母 |
|
ANSI/ASME B18.10 1982(R 2000) |
TRACK BOLTS |
轨道螺栓及螺母 |
|
ASME B18.6.3-2003 |
SQUARE AND HEX MACHINE SCREW UNTS |
方型和六角机器螺母 |
|
ASME B18.6.X DRAFT STANDARD 2002 |
WING NUTS |
蝶形螺母 |
|
E部分：高强度结构螺栓 |
||
|
IFI |
COMMENTARY ON HIGH STRENGTH STRUCTURAL BOLTING |
高强度结构螺栓的解释和说明 |
|
ASME B18.2.6-1996(R2004) |
FASTENERS FOR USE IN STRUCTURAL APPLICATIONS |
用于结构应用的紧固件 |
|
ASTM A325-2006 |
STRUCTURAL BOLTS,STEEL,HEAT TREATED,120/105 KSI MINIMUN TENSILE STRENGTH |
经热处理的最小抗拉强度为120/105 ksi的结构用钢螺栓 |
|
ASTM A490-2006 |
STRUCTURAL BOLTS,ALLOY STEEL,HEAT TREATED,150 KSI MINIMUN TENSILE STRENGTH |
经热处理的最小抗拉强度为150 ksi的合金钢结构用螺栓 |
|
ASTM A394-2005 |
STEEL TRANSMISSION TOWER BOLTS,ZINC COATED AND BEAR |
输电塔镀锌螺栓和裸螺栓 |
|
ASTM F901 2001 |
ALUMINUN TRANSMISSION TOWER BOLTS AND NUTS |
外科移植用精制钴铬钨镍合金 |
|
ASTM F1852-2005 |
TWIST OFF TYPE TENSION CONTROL STRUCTURAL BOLT/NUT/WASHER ASSEMBLIES,STEEL,HEAT TREATED 120/150 KSI MINIMUM TENSILE STRENGTH |
经热处理的120/105ksi最小抗张强度拧松式张力控制结构钢螺栓/螺母/垫圈组件 |
|
ASTM F959-2005a |
COMPRESSIBL-WASHER-TYPE DIRECT TENSION INDICATORS FOR USE WITH STRUCTURAL FASTENERS |
与结构紧固件一起使用的可压缩垫圈型直接拉力指示器 |
|
F部分：有效力矩紧固件 |
||
|
IFI |
AN INTRODUCTION TO LOCKING FASTENERS |
锁紧紧固件的介绍 |
|
IFI-100/107 2002 |
PREVAILING-TORQUE TYPE STEEL HEX AND HEX FLANGE NUTS REGULAR AND LIGHT HEX SERIES |
有效力矩型钢六角螺母和六角法兰螺母，常规小尺寸六角系列 |
|
IFI-124 2002 |
TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE SCREWS |
|
|
IFI-125 2002 |
TEST PROCEDURE FOR THE PERFORMANCE OF CHEMICAL COATED PREVAILING-TORQUE SCREWS |
|
|
IFI-155 2002 |
TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE NUTS |
非金属嵌件有效力矩型螺母的性能测试程序 |
|
IFI-143 2002 |
TEST FOR EVALUATING THE TORQUE-TENSION RELATIONSHIP ON BOTH EXTERNALLY AND INTERNALLY THREADED FASTENERS |
评测内外螺纹紧固件扭矩-拉伸关系的试验方法 |
|
G部分： 凹头螺钉 |
||
|
ASME B18.3-2003 |
SOCKET CAP,SHOULDER,SET SCREWS,HEX,AND SPLINE KEYS |
六角和键槽圆柱头内六角带肩紧定螺钉 |
|
ASTM A574-2004 |
ALLOY STEEL SOCKET HEAD CAP SCREWS |
合金钢内六角螺钉 |
|
ASTM F835-2004 |
ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS |
合金钢凹圆头螺钉和平埋头帽螺钉 |
|
ASTM F912-2004 |
ALLOY STEEL SOCKET SET SCREWS |
合金钢凹头固定螺钉 |
|
ASTM F879-2002a |
STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS |
不锈钢管座凸头及扁平埋头六角螺钉 |
|
ASTM F880-2002 |
STAINLESS STEEL SOCKET SET SCREWS |
不锈钢凹头螺钉 |
|
H部分：自攻螺钉 |
||
|
IFI |
AN INTRODUCTION TO TAPPING SCREWS |
自攻螺钉的介绍 |
|
ASME B18.6.4 1998 |
THREAD FORMING AND THREAD CUTTING TAPPING SCREWS AND METALLIC DRIVE SCREWS |
螺纹成型和螺纹切削自攻螺钉和金属传动螺杆 |
|
SAE J933 1998 |
MECHANICAL AND QUALITY REQUIREMENTS FOR TAPPING SCREWS |
自攻螺钉的机械和质量要求 |
|
SAE J81 1997 |
THREAD ROLLING TAPPING SCREWS |
滚制螺纹自攻螺钉 |
|
SAE J78 1998 |
SELF-DRILLING TAPPING SCREWS |
自钻自攻螺钉 |
|
I部分：机螺钉 |
||
|
ASME B18.6.3 2002 |
SLOTTED AND RECESSED HEAD MACHINE SCREWS； |
开槽和凹头机螺钉 |
|
IFI-138 2002 |
STRAIGHTNESS GAGING METHOD AND STRAIGHTNESS LIMITS FOR MACHINE,TAPPING,AND THREAD ROLLING SCREWS |
机械，自攻和滚动螺纹的直线度测量方法 |
|
J部分：其它小型螺钉 |
||
|
ASME B18.6.2 1998 |
SQUARE HEAD AND SLOTTED HEADLESS SET SCREWS |
开槽平头螺钉和开槽无头紧定螺钉 |
|
ASME B18.13 1996 |
SCREW AND WASHER ASSEMBLIES——SEMS |
螺钉和垫圈组件 |
|
IFI-156 2002 |
THUMB SCREWS AND WING SCREWS |
滚花和蝶形螺钉 |
|
ASME B18.6.1 1981(R 1997) |
WOOD SCREWS |
木螺钉 |
|
ASME B18.11 1961(R 2000) |
MINIATURE SCREWS |
小型螺钉 |
|
K部分：铆钉 |
||
|
ASME B18.1.2 1972(R 2001) |
LARGE RIVETS 1/2 IN.NOMINAL DIAMETER AND LARGER |
大铆钉 (公称直径1/2英寸及以上) |
|
ASME B18.1.1 1972(R 2001) |
SMALL SOLID RIVETS 7/16 IN.NOMINAL DIAMETER AND SMALLER |
小型实心铆钉(公称直径7/16英寸及以下) |
|
ASME B18.7 1972(R 2001) |
GENERAL PURPOSE SEMI-TUBULAR RIVETS,FULL TUBULAR RIVETS,SPLIT RIVETS AND RIVET CAPS |
通用半空心铆钉，空心铆钉，开口铆钉，铆钉盖 |
|
IFI-110 2003 |
GLOSSARY OF TERMS RELATING TO BLIND RIVETS |
盲孔铆钉相关专业词汇 |
|
IFI-114 2003 |
BREAK MANDREL BLIND RIVETS |
抽心铆钉 |
|
IFI-117 2003 |
PULL THROUGH MANDREL BLIND RIVETS |
带心轴盲孔铆钉 |
|
IFI-119 2003 |
STRUCTURAL FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS |
|
|
IFI-123 2003 |
DRIVE PIN BLIND RIVETS |
|
|
IFI-126 2003 |
BREAK MANDREL CLOSED END BLIND RIVETS |
抽心沉头铆钉 |
|
IFI-130 2003 |
STRUCTURAL SPLITTING SELF-PLUGGING PULL MANDREL BLIND RIVETS |
|
|
IFI-134 2003 |
MULTI-GRIP FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS |
|
|
IFI-135 2003 |
MECHANICAL TESTING OF BLIND RIVETS
|
盲孔铆钉的机械测试 |
|
IFI-137 2003 |
INSPECTION AND QUALITY ASSURANCE FOR GENERAL PURPOSE BLIND RIVETS |
通用盲孔铆钉的说明和质量保证 |
|
L部分：垫圈和销 |
||
|
ASME B18.22.1-1965(R2003) |
PLAIN WASHERS |
平垫圈 |
|
ASME B18.21.1 1999 |
LOCK WASHERS |
锁紧垫圈 |
|
ASME B18.2.6 |
BEVELED WASHERS |
斜垫圈 |
|
ASTM F844-2004 |
Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use |
未淬火的钢垫圈 |
|
ASTM F436-2004 |
HARDENED STEEL WASHERS |
硬化钢垫圈 |
|
ASME B18.8.1 1994(R 2000) |
CLEVIS PINS and Cotter Pins |
U形夹销和扁销 |
|
ASME B18.8.2 2000 |
TAPER PINS Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins |
圆锥销、定位销、圆柱销、槽销和弹簧销 |
|
M部分：质量保证 |
||
|
IFI |
INTRODUCTORY NOTES FASTENER QUALITY ASSURANCE |
紧固件质量保证的介绍 |
|
ASME Draft Revision B18.18.1 2002 |
INSPECTION AND QUALITY ASSURANCE FOR GENERAL PURPOSE FASTENERS |
通用紧固件的检验和质量保证 |
|
ASME Draft Revision B18.18.2 2002 |
INSPECTION AND QUALITY ASSURANCE FOR HIGH-VOLUME MACHINE ASSEMBLY FASTENERS |
大型机器组装紧固件的检验和质量保证 |
|
ASME Draft Revision B18.18.3 2002 |
INSPECTION AND QUALITY ASSURANCE FOR SPECIAL PURPOSE FASTENERS |
专用紧固件的检验和质量保证 |
|
ASME/ANSI B18.18.4M 1987(R 1999) |
INSPECTION AND QUALITY ASSURANCE FOR FASTENERS FOR HIGHLY SPECIALIZED ENGINEERED APPLICATIONS |
高度专业化设计应用中紧固件的检验和质量保证 |
|
ASME B18.18.5M 1998 |
INSPECTION AND QUALITY ASSURANCE PLAN REQUIRING IN-PROCESS INSPECTION AND CONTROLS |
检验和质量保证计划要求过程中的检验和控制 |
|
ASME B18.18.6M 1998 |
QUALITY ASSURANCE PLAN FOR FASTENERS PRODUCED IN A THIRD PARTY ACCREDITATION SYSTEM |
在第三方认可体系中生产的紧固件的质量保证计划 |
|
ASME B18.18.7M 1998 |
QUALITY ASSURANCE PLAN FOR FASTENERS PRODUCED IN A CUSTOMER APPROVED CONTROL PLAN |
在消费者核准的控制计划中生产的紧固件的质量保证计划 |
|
ASTM F1470 2002 |
STANDARD GUIDE FOR FASTENER SAMPLING FOR SPECIFIED MECHANICAL PROPERTIES AND PERFORMANCE INSPECTION |
规定的机械特性和性能检验用紧固件抽样指南 |
|
N部分：工艺技术参数 |
||
|
ASME B18.12 2001 |
GLOSSARY OF TERMS FOR MECHANICAL FASTENERS |
机械紧固件术语汇编 |
|
ASME B18.2.8 1999 |
CLEARANCE HOLES FOR BOLTS,SCREWS,AND STUDS |
螺栓、螺钉和双头螺栓的出砂孔 |
|
IFI-142 1997 |
HYDROGEN EMBRITTLEMENT RISK MANAGEMENT |
氢脆性危害处理 |
|
IFI |
WEIGHTS OF PRODUCTS |
产品重量 |
|
IFI |
STANDARDS AND SPECIFICATIONS ASTM,ASME,SAE,IFI |
ASTM,ASME,SAE,IFI标准和说明 |
|
IFI |
WHAT IS A SCREW? WHAT IS A BOLT？ |
螺钉和螺栓的区别 |
|
ASME B18.2.1 1996 |
SQUARE AND HEX BOLTS AND SCREWS(INCH SERIES) |
方型和六角型螺栓和螺钉 |
|
IFI |
DESIGN OF BOLTED JOINTS-AN INTRODUCTION |
螺栓连接设计的介绍 |
|
IFI |
FASTENER IDENTIFICATION MARKINGS |
紧固件鉴定指南 |
|
IFI |
DESIGNING SPECIAL FORMED PARTS |
设计特殊成形部分 |
| 加入收藏：
