|
IFI第三版紧固件标准目录(米制) |
||
|
A部分：螺纹 |
||
|
标准代号 |
标准名称(中文) |
标准名称(英文) |
|
IFI |
公制螺纹基础 |
Basics of Metric Screw Threads |
|
ASME B1.7M-1984(R2001) |
螺纹的术语、定义和字母代号 |
Nomenclature, Definitions, and Letter Symbols for Screw Threads Revision of ANSI B1.7-1977 |
|
ASME B1.13M-2001 |
米制螺纹：M型 |
Metric Screw Threads: M Profile |
|
ASME B1.3M-1992(R2001) |
允许尺寸的螺纹测量系统 英制和米制螺纹（UN, UNR, UNJ, M, 和 MJ） |
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ) Errata - 1994 |
|
ASME B1.16M-1984(R2001) |
米制M型螺纹的量规和测量 |
Gages and Gaging for Metric M Screw Threads Revision of ANSI B1.16-1972 |
|
B部分：材料和涂镀 |
||
|
IFI |
紧固件材料选择 |
Selecting Fastener Materials |
|
IFI |
螺栓和螺母的匹配 |
Bolt and Nut Compatibility |
|
IFI |
腐蚀作用 |
Corrosion |
|
IFI |
镀层和涂层 |
Platings and Coatings |
|
ASTM F568M-2004 |
碳合金钢外螺纹米制紧固件规格 |
Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners |
|
ASTM A563M-2004 |
碳素钢和合金钢螺母规格(米制) |
Standard Specification for Carbon and Alloy Steel Nuts [Metric] |
|
ASTM F738M-2002 |
不锈钢金属螺栓、螺钉及螺柱规格(米制) |
Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
|
ASTM F836M-2002 |
米制1型不锈钢螺母规格 |
Standard Specification for Style 1 Stainless Steel Metric Nuts |
|
ASTM F468M-2006 |
普通有色金属螺栓、六角帽螺钉和螺柱规格(米制) |
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric] |
|
ASTM F467M-2006 |
普通有色金属螺母规格(米制) |
Standard Specification for Nonferrous Nuts for General Use [Metric] |
|
ASTM F788/F788M-2005 |
英制和米制系列螺栓、螺钉和柱螺栓表面不连续性规格 |
Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series |
|
ASTM F812/F812M-2003 |
英制和米制系列螺母表面不连续性规格 |
Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series |
|
ASTM F606M-2005 |
实施测定外螺纹及内螺纹紧固件、垫圈及铆钉的机械性能的试验方法(米制) |
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric |
|
ASTM F871M-1998 |
加螺纹元部件电镀层标准规范(米制) |
Standard Specification for Electrodeposited Coatings on Threaded Components [Metric] |
|
ASTM B633-1998e1 |
钢铁表面电解沉积锌镀层规格 |
Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel |
|
ASTM B766-1986(2003) |
镉电沉积镀层规格 |
Standard Specification for Electrodeposited Coatings of Cadmium |
|
ASTM A153/A153M-2005 |
钢铁构件镀锌层（热浸）规格 |
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
|
ASTM B695-1991 |
钢铁表面锌机械沉积镀层规格 |
Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel |
|
ASTM B696-2000(2004)e1 |
镉机械沉积锌镀层的规格 |
Standard Specification for Coatings of Cadmium Mechanically Deposited |
|
ASTM F1136-2004 |
紧固件用铬/锌防蚀镀层的规格 |
Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners |
|
ASTM F1135-1999(2004) |
紧固件用铬酸镉或锌有机防蚀镀层的规格 |
Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners |
|
ASTM F1137-2000 |
紧固件用磷酸盐/油和磷酸盐/有机防蚀镀层的规格 |
Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners |
|
C部分：螺栓、螺钉和螺柱 |
||
|
ASME B18.2.3.1M-2005 |
米制六角帽螺钉 |
Metric Hex Cap Screws |
|
ASME B18.2.3.2M-2005 |
米制成形六角螺钉 |
Metric Formed Hex Screws |
|
ASME B18.2.3.3M-1979(R2001) |
米制粗六角螺钉 |
Metric Heavy Hex Screws Errata - April 1981 |
|
ASME B18.2.3.4M-2001 |
米制六角法兰螺钉 |
Metric Hex Flange Screws Supersedes IFI 536:1982 |
|
ASME B18.2.3.5M-1979(R2001) |
米制六角螺栓 |
Metric Hex Bolts Errata - May 1981 |
|
ASME B18.2.3.6M-1979(R1995) |
米制粗六角螺栓 |
Metric Heavy Hex Bolts Errata - April 1981 |
|
ASME B18.2.3.8M-1981(R1999) |
米制六角木螺钉 |
Metric Hex Lag Screws |
|
ASME B18.2.3.9M-2001 |
米制粗六角法兰螺钉 |
Metric Heavy Hex Flange Screws Supersedes IFI 538:1982 |
|
ASME B18.2.3.10M-1996(R2003) |
方头螺栓（米制系列） |
Square Head Bolts (Metric Series) |
|
IFI 528-1999 |
|
Metric Studs and Bent Bolts |
|
ASME B18.5.2.1M-1996(R2003) |
米制圆头短方颈螺栓 |
Metric Round Head Short Square Neck Bolts Erratum - October 2001; Erratum - May 2003 |
|
ASME B18.5.2.2M-1982(R1993) |
米制圆头方颈螺栓 |
Metric Round Head Square Neck Bolts |
|
IFI 544-1998 |
|
Metric Round Head Ribbed Neck Bolts |
|
ASME B18.5.2.3M-1990(R2003) |
大圆头方颈螺栓（米制系列） |
Round Head Square Neck Bolts with Large Head (Metric Series) |
|
ASME B18.2.7.1M-2002 |
米制12键槽凸缘螺钉 |
Metric 12-Spline Flange Screws Erratum 12/2002 |
|
D部分：螺母 |
|
|
|
ASME B18.2.4.1M-2002 |
米制1型六角螺母 |
Metric Hex Nuts, Style 1 |
|
ASME B18.2.4.2M-2005 |
米制2型六角螺母 |
Metric Hex Nuts, Style 2 |
|
ASME B18.2.4.3M-1979(R2001) |
米制六角开槽螺母 |
Metric Slotted Hex Nuts Errata - May 1981 |
|
ASME B18.2.4.4M-1982(R1999) |
米制六角凸缘螺母 |
Metric Hex Flange Nuts |
|
ASME B18.2.4.5M-1979(R2003) |
米制六角锁紧螺母 |
Metric Hex Jam Nuts Errata - May 1981 |
|
ASME B18.2.4.6M-1979(R2003) |
米制粗六角螺母 |
Metric Heavy Hex Nuts Errata - April 1981 |
|
E部分：有效力矩紧固件 |
||
|
IFI |
自锁紧固件介绍 |
Introduction to Locking Fasteners |
|
IFI-524-1996 |
非金属嵌件公制有效力矩型螺钉性能试验方法 |
Test Procedure for the Performance of Metric Nonmetallic Resistant Element Prevailing-Torque Screws |
|
IFI-525-1996 |
公制化学涂镀有效力矩型螺钉性能试验方法 |
Test Procedure for the Performance of Metric Chemical Coated Prevailing-Torque Screws |
|
ASME B18.16.3M-1998 |
有效力矩型米制钢六角螺母和六角法兰螺母的尺寸要求 |
Dimensional Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts |
|
ASME B18.16.1M-1979 |
有效力矩型米制钢六角螺母和六角法兰螺母的机械和性能要求 |
Mechanical and Performance Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts Errata - December 1980 R(2001) |
|
ASME B18.16.2M-1979 |
有效力矩型米制钢六角螺母和六角法兰螺母的转矩应力试验要求* |
Torque-Tension Test Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts R(2001) |
|
IFI-543-1999 |
公制内外螺纹紧固件扭-拉关系评估测试 |
Test for Evaluating the Torque-Tension Relationship on Both External and Interal Metric Threaded Fasteners |
|
F部分:高强度螺栓STRUCTURAL BOLTING |
||
|
IFI |
高强度结构螺栓的解释和说明 |
COMMENTARY ON HIGH STRENGTH STRUCTURAL BOLTING |
|
ASME B18.2.3.7M-1979(R2001) |
米制粗六角结构螺栓 |
Metric Heavy Hex Structural Bolts Errata - April 1981 |
|
ASTM A325M-2005 |
最小抗拉强度为830 MPa的热处理结构钢螺栓规格（公制） |
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric] |
|
ASTM A490M-2004a |
结构钢接合用等级为10.9和10.9.3的高强度螺栓规格(米制) |
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] |
|
ASTM F959M-2004 |
与结构紧固件一起使用的可压缩垫圈型直接拉力指示器规格(米制) |
Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric] |
|
G部分： 凹头螺钉 |
||
|
IFI |
小螺钉介绍 |
An Introduction to Small Screws |
|
ASME B18.6.7M-1999 |
米制机器螺钉 |
Metric Machine Screws 2000 Edition; Revision of ASME B18.6.7M-1985(1993); Supersedes IFI 513: 1981 |
|
ASME B18.6.5M-2000 |
米制螺纹成型和螺纹切削自攻螺钉 |
Metric Thread-Forming and Thread-Cutting Tapping Screws 2000 Edition; Revision of ANSI/ASME B18.6.5M-1986 |
|
SAE J1237-2001 |
公制自挤螺钉 |
Metric Thread Rolling Screws |
|
IFI |
渗碳层深度测定的推荐方法 |
Recommended Technique for Measuing Case Depth |
|
IFI-504 1997 |
公制自钻自攻钉 |
Metric Self-Drilling Tapping Screws |
|
ASME B18.13.1M-1998 (R2003) |
螺钉和垫圈组件 Sems(米制系列) |
Screw and Washer Assemblies - Sems (Metric Series) Supersedes IFI 531: 1982 |
|
H部分：机螺钉 |
||
|
ASME B18.3.1M-1986(R2002) |
内六角螺钉（米制系列） |
Socket Head Cap Screws (Metric Series) |
|
ASME B18.3.3M-1986(R2002) |
内六角带肩螺钉（米制系列） |
Hexagon Socket Head Shoulder Screws (Metric Series) |
|
ASME B18.3.4M-1986(R2002) |
内六角圆头螺钉（米制系列） |
Hexagon Socket Button Head Cap Screws (Metric Series) |
|
ASME B18.3.5M-1986(R2002) |
内六角扁平沉头螺钉（米制系列） |
Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series) |
|
ASME B18.3.6M-1986(R2002) |
米制系列内六角紧定螺钉 |
Metric Series Socket Set Screws |
|
ASME B18.3.2M-1979(R2003) |
米制系列六角板手和板手头 |
Metric Series Hexagon Keys and Bits |
|
ASTM A574M-2004 |
合金钢内六角螺钉(米制) |
Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric] |
|
ASTM F912M-2004 |
合金凹头螺钉规格(米制) |
Standard Specification for Alloy Steel Socket Set Screws [Metric] |
|
ASTM F880M-2002 |
不锈钢凹头螺钉规格(米制) |
Standard Specification for Stainless Steel Socket Set Screws [Metric] |
|
ASTM F879M-2002a |
不锈钢管座凸头及扁平埋头六角螺钉规格(米制) |
Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric] |
|
ASTM F835M-2004 |
合金钢管座凸头及扁平埋头六角螺钉规格(米制) |
Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric] |
|
ASTM F837M-2002a |
不锈钢内六角螺钉规格(米制) |
Standard Specification for Stainless Steel Socket Head Cap Screws [Metric] |
|
I部分:铆钉 |
||
|
IFI |
铆钉介绍 |
An Introduction to Rivets |
|
IFI-110/550 |
盲铆钉相关术语表 |
Glossary of Terms Related to Blind Rivets |
|
IFI-505 |
公制盲孔抽芯铆钉 |
Metric Break Mandrel Blind Rivets |
|
IFI-509 |
公制闭端盲孔抽芯铆钉 |
Metric Break Mandrel Closed End Blind Rivets |
|
IFI-520 |
|
Metric Pull Through Mandrel Blind Rivets |
|
IFI-522 |
公制盲铆钉的机械性能试验 |
Mechanical Testing of Metric Blind Rivets |
|
IFI-530 |
米制钢结构开口自锁抽芯盲铆钉 |
Metric Structural Splitting Self-Plugging Pull Mandrel Blind Rivets |
|
IFI-551 |
米制钢结构抽芯自锁盲铆钉 |
Metric Structural Flush Bresk Pull Mandrel Self-Plugging Blind Rivets |
|
IFI-552 |
米制双鼓抽芯自锁盲铆钉 |
Metric Multi-Grip Flush Bresk Pull Mandrel Self-Plugging Blind Rivets |
|
IFI-553 |
公制击芯铆钉 |
Metric Drive Pin Blind Rivets |
|
ASME B18.1.3M-1983(R2001) |
米制小型实心铆钉(公称直径12mm及以下) |
Metric Small Solid Rivets 12 mm Nominal Diameter and Smaller Errata - October 1985 |
|
ASME B18.7.1M-1984(R2000) |
米制通用半空心铆钉 |
Metric General Purpose Semi-Tubular Rivets |
|
J部分:销和垫圈 |
||
|
IFI |
销和垫圈介绍 |
An Introduction to Pins and Washers |
|
ANSI/ASME B18.8.3M-1995 |
米制系列螺旋弹簧销 * |
Spring Pins - Coiled Type (Metric Series) |
|
ANSI/ASME B18.8.4M-1994 |
有槽弹簧销(米制系列) * |
Spring Pins - Slotted (Metric Series) |
|
ANSI/ASME B18.8.5M-1999 |
米制淬硬圆头机械定位销钉 |
Machine Dowel Pins - Hardened Ground (Metric Series) |
|
ANSI/ASME B18.8.6M-1999 |
米制系列开尾销 * |
Metric Cotter Pins |
|
ANSI/ASME B18.8.7M-1999 |
无头U形夹销(米制系列) * |
Metric Headless Clevis Pins |
|
ANSI/ASME B18.8.8M-1999 |
有夹U形夹销(米制系列) * |
Metric Headed Clevis Pins |
|
ASME B18.22M-1981(R2000) |
米制平垫圈 |
Metric Plain Washers |
|
ASTM F436M-2004 |
硬化钢垫片规格(米制) |
Standard Specification for Hardened Steel Washers [Metric] |
|
IFI-534 |
公制斜垫圈 |
Metric Beveled Washers |
|
ASME B18.21.2M-1999 |
锁紧垫圈（米制系列） |
Lock Washers (Metric Series) Supersedes IFI 532: 1982 |
|
K部分:自攻螺钉 |
||
|
IFI |
公制机械紧固件单位应用规定 |
Rules for the Use Units Applicable to Metric Mechanical Fasteners |
|
IFI |
什么是螺钉？什么是螺栓？ |
What is a Screw? What is a Bolt? |
|
IFI-527 |
公制螺纹紧固件通孔 |
Clearance Holes for Metric Threaed Fasteners |
|
ASME B18.6.5M-2000 |
米制螺纹成型和螺纹切削自攻螺钉 |
Metric Thread-Forming and Thread-Cutting Tapping Screws 2000 Edition; Revision of ANSI/ASME B18.6.5M-1986 |
|
IFI |
IFI工程委员会推荐孔径－公制D,F,G,T型自攻钉 |
IFI Engineering Committee Recommended Hole Sizes-Metric Types D,F,G,T Tapping Screws |
|
IFI |
ISO体系的极限与配合 |
ISO System of Limits and Fits |
|
SAE J121M-1997 |
硬化并回火后螺纹紧固件表面脱碳层 |
Decarburization in Hardened and Tempered Metric Threaded Fasteners |
|
IFI-142 |
氢脆风险的处理 |
Hydrogen Embrittlement Risk Management |
|
IFI |
公制紧固件的重量 |
Weights of Metric Fasteners |
|
IFI |
紧固件术语 |
Fasteners Terminology |
|
IFI |
标准和规范 |
Standards and Specifications |
|
IFI |
加工过程取样频率 |
In-Process Sampling Frequency |
|
L部分:质量保证 |
||
|
IFI |
紧固件质量保证的介绍 |
INTRODUCTORY NOTES FASTENER QUALITY ASSURANCE |
|
ASME B18.18.1M-1987(R1999) |
通用紧固件的检验和质量保证 |
Inspection and Quality Assurance for General Purpose Fasteners |
|
ASME B18.18.2M-1987(R1999) |
大型机器组装紧固件的检验和质量保证 |
Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners |
|
ASME B18.18.2M SUPPLEMENT-1994 |
ASME B18.18.2m-1987大型机器组装紧固件的检验和质量保证的补充 |
Supplement of ASME B18.18.2m-1987 Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners |
|
ASME B18.18.3M-1987(R1999) |
专用紧固件的检验和质量保证 |
Inspection and Quality Assurance for Special Purpose Fasteners |
|
ASME B18.18.4M-1987(R1999) |
高度专业化设计应用中紧固件的检验和质量保证 |
Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications |
|
ASME B18.18.5M-1998(R2003) |
检验和质量保证计划要求过程中的检验和控制 |
Inspection and Quality Assurance Plan Requiring In-Process Inspection and Controls |
|
ASME B18.18.6M-1998(R2003) |
在第三方认可体系中生产的紧固件的质量保证计划 |
Quality Assurance Plan for Fasteners Produced in a Third Party Accreditation System |
|
ASME B18.18.7M-1998(R2003) |
在消费者核准的控制计划中生产的紧固件的质量保证计划 |
Quality Assurance Plan for Fasteners Produced in a Customer Approved Control Plan |
| 加入收藏：
