www.mapeng.net 马棚网
体
cutter diameter || 刀盘直径
cutter edge radius || 刀刃圆角半径
cutter grinder || 刀具刃磨床
cutter grinding || 刃磨
cutter grinding machine || 工具磨床
cutter head || 刀盘
cutter interferes || 刀具干渉
cutter number || 刀号
cutter offset || 刀具偏量
cutter oils || 馏出石油产品
cutter parallel || 刀盘平垫片
cutter pass || 刀具轨迹
cutter point diameter || 刀尖直径
cutter point radius || 刀尖半径
cutter point width || 刀顶距
cutter sharpening || 刃磨
cutter spindle || 刀盘主轴
cutter spindle rotation angle || 刀盘主轴转角
cutters || 刀具
cutting || 切削
cutting ability || 切削性能
cutting action of slag || 炉渣侵蚀作用
cutting compound || 润削剂，切削液
cutting coolant || 切削冷却液
cutting data || 切削用量
cutting depth || ①切削深度②开挖深度
cutting diamond || 金刚石刀(切割玻璃用)
cutting distance || 切齿安装距
cutting edge || 刀刃
cutting edge angle || 主偏角
cutting edge clearance || 刃口余隙角
cutting edge inclination || 刃倾角
cutting effect of slag || 炉渣侵蚀作用
cutting equipment || 切削设备
cutting fluid || 切削液
cutting force || 切削力
cutting hardness || 切削硬度
cutting heat || 切削热
cutting liquid || 切削液
cutting oil || 油质切削剂，切削油
cutting pitch circle || 分度圆
cutting plane line || 剖切平面迹线
cutting power || 切削功，切削力
cutting property || 切削性能
cutting shellac || 酒精漆片，溶剂漆片
cutting speed || 切削速度
cutting stroke || 切削行程，工作行程，剪切冲程，刨程
cutting surface || 切削表面
cutting temperature || 切削温度，切削热
cutting test || 切削试验
cutting tool coolant oil || 切削工具冷却油
cutting tool lubricant || 切削工具润滑油
cutting tool steel || 刃具钢
cutting torque || 切削扭矩，切削力
cutting wheel || 切割轮(切玻璃用)
cutting-in speed || 接通转速
cutting-off machines || 切断机
cutting-tool || 切削工具，刀具，刀剪
cuttings || 切屑，金属屑
cyanaloc || 氰基树脂(防水剂)
cyanamide || 氨基氰
cyanation || 氰化作用，氰化法
cyanidation || 氰化法
cyanidation test || 氰化试验
cyanide || 氰化物
cyanide bath || ①氰化溶液槽②氰化盐浴
cyanide carburizing || 氰化法
cyanide case hardening || 氰化热处理
cyanide copper || 氰化槽电沉的铜
cyanide gold-refining || 氰化炼金法，氰化物炼金法
cyanide hardening || 氰(浴)硬化，氰化
cyanide treatment || 氰化处理
cyaniding || 氰化，液体碳氰共浸
cyaniding furnace || 氰化炉
cyaniding pollution || 氰化物污染
cyanoacrylates || 丙烯酸树脂基粘结剂
cyanometer || 天空蓝度测定仪
cybernetic system || 控制论系统
cybernetics || 控制论
cyc-arc welding || 自动电弧焊
cycle || ①循环②周期③回路，环④自行车
cycle annealing || 循环退火，周期退火
cycle constant || 循环常数
cycle intermediate annealing || 还原退火
cycle life || 循环寿命
cycle motor || 自行车用电动机
cycle of annealing || 退火程序
cycle of loading || 加载循环
cycle of motion || 运动周期
cycle of overload || 过载循环
cycle oil || 循化油，催化裂化油
cycle parameter || 循环参数
cycle process annealing || 循环式退火
cycle time || 循环时间，
www.mapeng.net 马棚网
