目录 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN
NF——法国标准化协会目录
编号 中文名称 英文名称
NF H60-140-2000 包装.通过组成和生物降解对包装再覆盖性的要求.包装最终验收的试验计划和评价标准 (Packaging - Requirements for packaging recoverable through compositing and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging.)
NF H60-145-2003 包装.在规定了合成条件的实际定向试验中包装材料分解的评定 (Packaging - Evaluation of the desintegration of packaging materials in practical oriented tests under defined composting conditions.)
NF H60-146-2003 包装.在受控的合成条件下包装材料最大需氧生物降解能力的评定.释放二氧化碳的分析方法 (Packaging - Evaluation ot the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide.)
NF H60-147-2003 包装.测定在气化介质中包装材料的最终氧化生物降解性.二氧化碳分析法 (Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxyde.)
NF H60-148-2003 包装.测定在气化介质中包装材料的最终氧化生物降解性.封闭式呼吸机需氧量测量方法 (Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer.)
NF H90-001-1984 商品运输用集装箱.术语 (Freight containers. Terminology.)
NF H90-005-1984 集装箱.系列1.包角件.规范 (Freight containers. Series 1. Corner fittings. Specifications.)
NF H90-009-1993 集装箱系列1.规范和试验.第五部分:平台和平台基式集装箱 (Series 1 freight containers. Specification and testing. Part 5 : platform and platform-based containers.)
NF H90-020-1990 商品运输用集装箱.有关集装箱设备的数据交换(CEDEX).第1部分:一般通信的代码 (Freight containers. Container equipment data exchange (cedex). Part 1 : general communication codes.)
NF H90-025-1-1991 货运集装箱.有关船上集装箱的信息.第1部分:海湾计划系统 (Freight containers. Information related to containers on board vessels. Part 1 : bay plan system.)
NF H90-025-2-1991 货运集装箱.有关船上集装箱的信息.第2部分:电传数据传送 (Freight containers. Information related to containers on board vessels. Part 2 : telex data transmission.)
NF H90-040-1998 货运集装箱.自动识别. (Freight containers. Automatic identification.)
NF H90-050-1999 海运集装箱.设计、结构、试验、检验和标记 (Offshore containers. Design, construction, testing, inspection and marking.)
NF H90-202-1992 C组可换用的车箱.尺寸和一般要求 (Swap bodies. Swap bodies of class C. Dimension and general requirements.)
NF H90-203-1991 交换体.试验 (Swap bodies. Testing.)
NF H90-204-1995 A级交换体.尺寸和一般要求 (Swap bodies. Swap bodies of class A. Dimensions and general requirements.)
NF H90-206-1999 交换部件.A级热交换部件.尺寸和一般要求 (Swap bodies. Thermal swap bodies of class A. Dimensions and general requirements.)
NF H90-207-1999 交换部件.C级热交换部件.尺寸和一般要求 (Swap bodies. Thermal swap bodies of class C. Dimensions and general requirements.)
NF H90-208-1997 交换体:交换容器.尺寸、要求、试验方法和操作条件(欧洲标准EN 1432) (Swap bodies. Swap tanks. Dimensions, requirements, test methods, operation conditions.)
NF H90-210-2000 道路车辆上货物的安全性.货物运输用商业车辆的无极绳挂点.最低要求和试验 (Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testing.)
NF H90-211-1-2000 交换体.防水帆布.第1部分:最低要求 (Swap bodies - Tarpaulines - Part 1 : minimum requirements.)
NF H90-212-2002 道路车辆上货物的安全.商用车辆的车体结构.最低要求 (Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements.)
NF H90-215-2000 交换体.编码识别和标记 (Swap bodies - Coding, identification and marking.)
NF H92-100-1996 铁路用储存和查找设备.安全(欧洲标准EN 528) (RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT. SAFETY. (EUROPEAN STANDARD EN 528).)
NF H92-100/A1-2003 铁轨加固和储藏设备.安全性 (Rail dependent storage and retrieval equipement - Safety.)
NF H94-001-1-2000 包装机械的安全性.第1部分:包装机和相关设备的分类和术语 (Packaging machines safety - Part 1 : terminology and classification of packaging machines and associated equipment.)
NF H94-001-2-2000 包装机械的安全性.第2部分:预成型硬质容器包装机 (Packaging machines safety - Part 2 : pre-formed rigid container packaging machines.)
NF H94-001-3-2000 包装机械的安全性.第3部分:成型,填充和密封机 (Safety of packaging machines - Part 3 : form, fill and seal machines.)
NF H94-001-4-1997 包装机械的安全性.第4部分:码垛机和散垛机 (Safety of packaging machines. Part 4 : palletisers and depalletisers.)
NF H95-103-1977 连续机械装卸设备.皮带式传送机安全规程.接合点安全示例 (Continuous mechanical handling equipment. Safety code for belt conveyors. Examples for safety of nip points.)
NF H95-104-1976 连续机械装卸设备.链式传送机和升降机的安全规程.接合点安全示例 (Continuous mechanical handling equipment. Safety code for conveyors and elevators with chain-elements. Examples for safety of nip points.)
NF H95-105-1976 连续机械装卸设备.带有支承装置或载重托架的链式传送机.防止载重托架造成伤害的示例 (Continuous mechanical handling equipment. Chain conveyors with bearing devices or load carriers. Examples of protection against injuries by load carriers.)
NF H95-111-2000 连续装卸设备和系统.大宗材料的气动处理系统和件的安全要求 (Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials.)
NF H95-112-2001 连续搬运设备和系统.筒仓、漏斗、储存斗和装料斗中存储散装物料用设备的安全性和EMC要求 (Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers.)
NF H95-113-2002 连续搬运设备和系统.散装物料机械搬运设备(不包括固定运送装置)的安全和制造、安装及使用(EMC)要求 (Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors.)
NF H95-114-2003 连续搬运设备和系统. 成组货件机械搬运设备安全和电磁兼容要求 (Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads.)
NF H95-115-2002 连续搬运设备和系统. 散装物料搬运用固定皮带输送装置的安全和EMC要求 (Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials.)
NF H95-205-1978 散装产品.连续装卸机械.散装产品的气动装卸.流量、挡板和功能的图形符号 (CONTINUOUS PNEUMATIC HANDLING FOR LOOSE BULK MATERIALS. GRAPHIC SYMBOLS FOR FLOWS,WALLS AND FUNCTIONS.)
NF H95-206-1978 散装产品用连续机械装卸设备.螺旋传送机设计规则 (CONTINUOUS MECHANICAL HANDLING EQUIPMENT FOR LOOSE BULK MATERIAL.DESIGN RULES FOR SCREW CONVEYORS.)
NF H95-207-1978 连续机械装卸设备.端板传送机的设计规则 (CONTINUOUS MECHANICAL HANDLING EQUIPMENT.DESIGN RULES FOR APRON CONVEYORS.)
NF H95-320-1988 连续装卸机器.连续平衡计算器称重仪用带式输送机.特性 (CONTINUOUS MECHANICAL HANDLING EQUIPMENT. BELT CONVEYORS TO BE FITTED OUT WITH A CONTINUOUS WEIGHING DEVICE. CHARACTERISTICS.)
NF H95-330-1987 散装产品皮带输送机.鼓轮、轴、轴承.重型系列尺寸 (Belt conveyors for bulk materials. Belt pulleys, shafts, bearings. Heavy series. Dimensions.)
NF H95-422-1983 农产食品工业用起重装卸机械.载货升降机.综合预防措施 (MATERIALS HANDLING AND LIFTING IN THE AGRI-FOODSTUFFS INDUSTRIES. LIFT LOADERS. BUILT-IN SAFETY.)
NF H95-450-1980 自动装卸设备.报价用标准咨询表 (AUTOMATIC LOADING HANDLING EQUIPMENT. CHECK-LIST FOR BIDDING.)
NF H96-002-1983 自动装卸车.词汇 (INDUSTRIAL TRUCKS. VOCABULARY OF POWERED TRUCKS.)
NF H96-003-1974 装卸车.操作平台.术语 (INDUSTRIAL TRUCKS-SAFETY ASPECTS.CONCERNING OPERATING AREAS.)
NF H96-004-1974 搬运拖车.术语 (INDUSTRIAL TRAILERS-TERMINOLOGY.)
NF H96-101-1973 装卸车.带臂升降车和工作台的尺寸 (INDUSTRIAL TRUCKS HAND-OPERATED ELEVATING TRUCKS AND STILLAGES PRINCIPAL DIMENSIONS.)
NF H96-110-4-1997 垃圾运送箱.第4部分:有宽耳轴或圆锥形和/或梳齿提升设备用容积从750L到1700L的四轮运送箱.尺寸和设计(欧洲 (MOBILE WASTE CONTAINERS. PART 4 : CONTAINERS WITH 4 WHEELS WITH A CAPACITY FROM 750 L TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG-AND/OR WIDE COMB LIFTING DEVICE. DIMENSIONS AND DESIGN. (EUROPEAN STANDARD EN 840-4).)
NF H96-110-5/A1-2000 移动式废物容器.第5部分:性能要求和试验方法 (Mobile waste containers - Part 5 : performance requirements and test methods.)
NF H96-110-6-1997 垃圾运送箱.第6部分:安全和健康要求(欧洲标准EN 840-6) (MOBILE WASTE CONTAINERS. PART 6 : SAFETY AND HEALTH REQUIREMENTS. (EUROPEAN STANDARD EN 840-6).)
NF H96-110-6/A1-2000 移动式废物容器.第6部分:安全和健康要求 (Mobile waste containers - Part 6 : safety and health requirements.)
NF H96-112-2-1999 垃圾收集用提升设备.第2部分:容量500-1300升的移动废料容器用转轴式提升设备的技术规范和安全要求 (Lifting devices for refuse collection. Part 2 : technical specifications and safety requirements concerning trunnion lifting devices used for mobile waste containers with capacities from 500 l to 1 300 l.)
NF H96-112-3-1999 垃圾收集用提升设备.第3部分:容量80-1300升的移动废料容器用冠形和转轴式提升设备的技术规范和安全要求 (Lifting devices for refuse collection. Part 3 : technical specifications and safety requirements concerning comb and trunnion lifting devices used for mobile waste containers with capacities from 80 l to 1 300 l.)
NF H96-112-4-1999 垃圾收集用提升设备.第4部分:检验提升设备的要求和试验方法 (LIFTING DEVICES FOR REFUSE COLLECTION. PART 4 : REQUIREMENTS FOR CHECKING THE LIFTING DEVICE AND TEST METHODS.)
NF H96-113-1-2002 固定的废弃物容器.第1部分: 套管、双向套管或袖珍提升装置用带平或圆形罩的1700升-5000升容量的容器.尺寸和 (Stationary waste containers - Part 1: containers with a capacity from 1700 l to 5000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design.)
NF H96-113-2-2002 固定的废弃物容器.第2部分:性能要求和试验方法 (Stationary waste containers - Part 2 : performance requirements and test methods.)
NF H96-113-3-2002 固定的废弃物容器.第3部分:安全要求和健康要求 (Stationary waste containers - Part 3 : safety and health requirements.)
NF H96-115-2002 可选择废弃物收集容器.可选择收集废弃物用80 l到5000 l容积的地面机械提升废弃物容器 (Selective waste collection containers - Above-ground mechanically-lifted containers with capacities from 80 l to 5 000 l for selective collection of waste.)
NF H96-116-1998 移动式废物箱.测定移动式废物箱产生的空气传播噪音的测试规范 (MOBILE WASTE CONTAINERS. TEST CODE FOR THE MEASUREMENT OF AIRBORNE ACOUSTICAL NOISE EMITTED BY MOBILE WASTE CONTAINERS.)
NF H96-301-2-1989 自动装卸车.建造一般规则及踏板形状 (SELF-PROPELLED INDUSTRIAL TRUCKS SIT-DOWN RIDER-CONTROLLED. RULES FOR THE CONSTRUCTION AND LAYOUT OF PEDALS. (EUROPEAN STANDARD EN 281).)
NF H96-301-31-1990 NF H 96-301-3-89的补充1 ()
NF H96-302-1999 工业卡车的安全.达到和包括10000千克容量的自推动式卡车和带有一达到和包括20000N的拖斗的工业拖车.第十部 (SAFETY OF INDUSTRIAL TRUCKS. SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10000 KG CAPACITY AND INDUSTRIAL TRACTORS WITH A DRAWBAR PULL UP TO AND INCLUDING 20000 N. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 1726-1).)
NF H96-303-2001 工业货车的安全.容量不大于10000Kg的自行式货车和拖杆拉力不大于20000N的牵引车.第2部分:带有高架操作者位 ()
NF H96-310-1975 工业用货车.国家安全规定、规程和标准的清单 (INDUSTRIAL TRUCKS - LIST OF NATIONAL SAFETY REGULATIONS, CODES AND STANDARDS)
NF H96-311-2001 工业卡车的安全.测量噪音散发的试验方法 (Safety of industrial trucks - Test methods for measuring noise emissions.)
NF H96-313-2002 工业载重汽车的安全.测量振动用试验方法 (Safety of industrial trucks - Test methods for measuring vibration.)
NF H96-315-2000 工业卡车.电磁兼容性 (Industrial trucks - Electromagnetic compatibility.)
NF H96-330-1-1998 自动装卸车安全.电气要求.第1部分:电池驱动卡车的一般要求 (SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 1 : GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS. (EUROPEAN STANDARD EN 1175-1).)
NF H96-330-2-1998 自动装卸车安全.电气要求.第2部分:内燃机驱动的卡车的一般要求 (SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 2 : GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. (EUROPEAN STANDARD EN 1175-2).)
NF H96-330-3-1998 自动装卸车安全.电气要求.第3部分:内燃机驱动的卡车的电动传输系统特殊要求 (SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 3 : SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. (EUROPEAN STANDARD EN 1175-3).)
NF H96-332-1997 工业卡车的安全.卡车上自动化功能件的补充要求 (SAFETY OF INDUSTRIAL TRUCKS. ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS. (EUROPEAN STANDARD EN 1526).)
NF H96-333-2000 工业卡车的安全.10000KG以上的自推式卡车 (Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity.)
NF H96-334-2000 工业卡车的安全.潜在爆炸环境中的操作.用于可燃气体,蒸汽潮气和灰尘 (Safety of Industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust.)
NF H96-335-1-2001 工业货车安全.脚踏货车.第1部分:叉车 (Safety of industrial trucks - Pedestrian propelled trucks - Part 1 : stacker trucks.)
NF H96-335-2-2001 工业货车安全.脚踏货车.第2部分:托盘货车 (Safety of industrial trucks - Pedestrian propelled trucks - Part 2 : pallet trucks.)
NF H96-335-3-2003 工业货车的安全.可以在侧面步行操纵的手推车和半手动运货车.第3部分:平板式载重车 (Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3 : platform trucks.)
NF H96-335-4-2003 工业货车安全.脚踏货车.剪式自动装卸码垛货车 (Safety of industrial trucks - Pedestrian propelled trucks - Part 4 : scissor lift pallet-trucks.)
NF H96-403-1996 叉式起重车.钩接式叉臂.词汇 (Fork-lift trucks. Hook-on type fork arms. Vocabulary.)
NF H96-404-1977 装卸车.叉车.榫接式实心叉臂.尺寸 (FORK LIFT TRUCKS. HOOK-ON TYPE FORK ARMS. DIMENSIONS.)
NF H96-406-1996 叉车.钩接式叉臂和叉臂托架.安装尺寸 (Fork-lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions.)
NF H96-407-1996 工业运载汽车.叉式起重机设备叉杆的修理和检验 (Industrial trucks. Inspection and repair of fork arms in service on fork-lift trucks.)
NF H96-601-1998 小脚轮和车轮.词汇.推荐符号和多语词典.(欧洲标准EN 12526) (Castors and wheels. Vocabulary, recommended symbols and multilingual dictionary.)
NF H96-606-1975 工业用货车滚动面.分类 (ROLLING SURFACES FOR INDUSTRIAL TRUCKS. CLASSIFICATION.)
NF H96-610-1998 小脚轮和车轮.试验方法和装置(欧洲标准EN 12527) (Castors and wheels. Test methods and apparatus.)
NF H96-611-1998 小脚轮和车轮.家具用小角轮.要求.(欧洲标准EN 12528) (Castors and wheels. Castors for furniture. Requirements.)
NF H96-612-1998 小脚轮和车轮.家具用小角轮.转椅用小角轮.要求.(欧洲标准EN 12529) (Castors and wheels. Castors for furniture. Castors for swivel chairs. Requirements.)
NF H96-613-1998 小脚轮和车轮.手工推动装置的小脚轮和轮子.(欧洲标准EN 12530) (Castors and wheels. Castors and wheels for manually propelled institutional applications.)
NF H96-614-1998 小脚轮和车轮.医院用轮床(欧洲标准EN 12531) (Castors and wheels. Hospital bed castors.)
NF H96-615-1998 小脚轮和车轮.1,1M/S(4KM/H)装置的轮和小角轮(欧洲标准EN 12532) (Castors and wheels. Castors and wheels for applications up to 1,1 m/s (4 km/h).)
NF H96-616-1998 小脚轮和车轮.大于1,1M/S(4KM/H)达到4,4M/S(16KM/H)装置的轮和小角轮(欧洲标准EN 12533) (Castors and wheels. Castors and wheels for applications over 1 ,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h).)
NF J13-005-1968 造船.铝和铝合金.轧制和拉制产品.可用合金表 (SHIPBUILDING. ALUMINIUM AND ALUMINIUM ALLOYS. ROLLED AND DRAWN PRODUCTS. LIST OF USEABLE ALLOYS.)
NF J17-030-1975 造船工业.船用涂料.数据单的示例 (SHIPBUILDING. MARINE PAINTS. EXAMPLE OF A DATA SHEET.)
NF J17-040-1979 造船工业.船用涂料.检修报告示例 (SHIPBUILDING. MARINE PAINTS. EXAMPLE OF A CAREENAGE REPORT.)
NF J17-505-1982 船用涂料.金属面涂层厚度的无损伤测量.操作条件 (SHIPBUILDING. MARINE PAINTS. NON-DESTRUCTIVE ON-SITE MEASUREMENT OF THE THICKNESS OF COATINGS ON A METAL SUBSTRATE. REQUIREMENTS.)
NF J22-209-1995 小型船舶.抗燃烧燃料软管 (Small craft. Fire resistant fuel hoses.)
NF J22-209/A1-2000 油艇.耐火燃料用软管 (Small craft - Fire resistant fuel hoses.)
NF J22-220-2003 船舶与海上技术.软管组件耐火性.试验方法 (Ships and marine technology - Fire resistance of hose assemblies - Test methods.)
NF J22-221-2003 船舶与海上技术.软管组件耐火性.试验台技术要求 (Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench.)
NF J22-860-1993 造船工业.带钢管法兰的焊接舱壁件.PN6.PN10.PN16.PN20 (Shipbuilding. Welded bulkhead pieces with flanges for steel pipework. Pn 6, PN10, PN 16, PN 20.)
NF J22-910-2001 小型船舶.卫生间废弃物的积集系统 (Small craft - Toilet waste retention systems.)
NF J24-010-1957 造船工业.软管.使用总表.直径.材料.接合型.用途.压力 (SHIPBUILDING. FLEXIBLE PIPING. GENERAL TABLE. DIAMETERS. MATERIALS. TYPES OF JOINT. APPLICATIONS. PRESSURES.)
NF J24-020-1957 造船工业.软管.船用管道软管的连接.使用总表 (SHIPBUILDING. FLEXIBLE PIPING. METHODS OF CONNECTING TO SHIPBOARD PIPELINES. GENERAL TABLE.)
NF J24-137-1957 造船工业.软管.石油产品装船用直套管 (SHIPBUILDING. FLEXIBLE PIPING. STRAIGHT FILLING NECKS FOR LOADING PETROLEUM PRODUCTS.)
NF J24-140-1957 造船工业.软管.石油产品装船用小型套管 (SHIPBUILDING. FLEXIBLE PIPING. REDUCING NECKS FOR LOADING PETROLEUM PRODUCTS.)
NF J24-145-1957 造船工业.软管.石油产品装船用甲板套筒的软管连接环 (SHIPBUILDING. FLEXIBLE PIPING. RING COUPLINGS FOR FLEXIBLE PIPES AND FILLING NECKS FOR LOADING PETROLEUM PRODUCTS.)
NF J25-215-1969 造船工业.航海.船上阀门附件.杆的直径和螺纹 (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. SHANK DIAMETERS AND THREADS.)
NF J25-220-1969 造船工业.航海.船上阀门附件.船首和手轮用方钢 (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. SQUARES FOR STEMS AND HANDWHEELS.)
NF J25-255-1969 造船工业.航海.船上阀门附件.偏移手轮.尺寸.互换性 (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. DISHED HANDWHEELS. DIMENSIONS. INTERCHANGEABILITY.)
NF J25-274-1969 造船工业.航海.船上阀门附件.板手 (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. CRANK HANDLES.)
NF J25-308-1969 造船工业.船上阀门附件.填料箱.法兰压盖.尺寸.互换性 (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. STUFFING BOXES. GLANDS WITH FLANGE. DIMENSIONS. INTERCHANGEABILITY.)
NF J25-310-1969 造船工业.航海.船上阀门附件.带压盖和螺母的填料箱 (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. STUFFING BOXES WITH GLAND AND NUT.)
NF J25-500-1958 造船工业.海水专用阀门.一般规范 (SHIPBUILDING. SEA WATER VALVES. GENERAL SPECIFICATION.)
NF J25-505-1958 造船工业.海水专用阀门.器材连接孔的位置 (SHIPBUILDING. SEA WATER VALVES. ARRANGEMENT OF BODY ENDS.)
NF J25-510-1958 造船工业.海水专用阀门.带螺纹杆的连接阀.安装I.部件名称 (SHIPBUILDING. SEA WATER VALVES. SCREW-DOWN STOP VALVES. PATTERN I. OPERATING MECHANISM. PARTS LIST.)
NF J25-513-1958 造船工业.海水专用阀门.自由滑动式连接阀,安装II.部件名称 (SHIPBUILDING. SEA WATER VALVES. SHIP SIDE DISCHARGE VALVES. PATTERN II. OPERATING MECHANISM PARTS LIST.)
NF J25-516-1958 造船工业.海水专用阀门.闭锁式自由阀.安装III.部件名称 (SHIPBUILDING. SEA WATER VALVES. SCREW-DOWN STOP-AND-CHECK VALVES. PATTERN III. OPERATING MECHANISM. PARTS LIST.)
NF J25-519-1958 造船工业.海水专用阀门.闭锁式自由阀门.安装IV.部件名称 (SHIPBUILDING. SEA WATER VALVES. SCREW-DOWN STOP-AND-CHECK VALVES WITH OPENING MECHANISM. PATTERN IV. OPERATING MECHANISM PARTS LIST.)
NF J25-522-1958 造航工业.海水专用阀门.舱底吸水阀.组装件.一般尺寸 (SHIPBUILDING. SEA WATER VALVES. BILGE VALVES. ASSEMBLY. GENERAL DIMENSIONS.)
NF J25-526-1958 造船工业.海水专用阀门.船弦排水阀.组装件.一般尺寸 (SHIPBUILDING. SEA WATER VALVES. DISCHARGE VALVES. ASSEMBLY. GENERAL DIMENSIONS.)
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183] [184] [185] [186] [187] [188] [189] [190] [191] [192] [193] [194] [195] [196] [197]