目录 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN
NF——法国标准化协会目录
编号 中文名称 英文名称
NF E66-077-1975 攻丝导孔圆柱柄分级钻 (SUBLAND TWIST DRILLS WITH PARALLEL SHANKS FOR HOLES PRIOR TO TAPPING SCREW THREADS.)
NF E66-078-1975 攻丝导孔莫氏锥柄分级钻 (SUBLAND TWIST DRILLS WITH MORSE TAPER SHANKS FOR HOLES PRIOR TO TAPPING SCREW THREADS.)
NF E66-080-1980 建筑物用带硬金属钻头的钻.冲击钻头式钻机.特性 (MASONRY DRILLS,WITH HARD METAL TIPS. HAMMER DRILLS. CHARACTERISTICS.)
NF E66-081-1984 建筑物用钻机.旋转冲击钻机的连接锥体.尺寸 (MASONRY DRILLS. TAPERS OF HAMMER DRILLS.)
NF E66-101-2002 G系列和Rp系列管螺纹用的螺纹丝锥.螺纹部分的公差 (Ground thread taps for pipe threads G series and Rp series - Tolerances on the threaded portion.)
NF E66-103-1993 机用螺丝锥和手动螺丝锥 (Short machine taps and hand taps.)
NF E66-107-2000 公称直径由M3-M10的长杆螺丝攻.由回缩的全直径杆型螺丝攻 (Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess.)
NF E66-108-2000 公称直径由M3-M24和1/8-1 英寸的长杆螺丝攻.渐减型螺丝攻 (Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps.)
NF E66-120-1975 圆柱和锥形管螺纹手用螺丝锥 (HAND TAPS FOR PIPE THREADS FOR PARALLEL AND TAPER THREADS.)
NF E66-130-1983 可调的丝锥板手(丝锥架) (ADJUSTABLE TAP WRENCHES (TAP HOLDERS).)
NF E66-150-1990 ISO公制螺纹的手用和机用圆螺丝板牙 (Hand- An machine-operated circular screwing dies and hand-operated die stocks.)
NF E66-153-1990 煤气管道圆柱螺纹手用和机用圆螺丝板牙 (Hand-and machine-operated circular screwing dies for parallel pipe threads. G series.)
NF E66-154-1990 煤气管道锥形螺纹手用和机用圆螺纹板牙 (Hand- and machine-operated circular screwing dies for taper pipe threads. R series.)
NF E66-156-1985 手用六角圆板牙.尺寸 (Hexagonal dienuts. Dimensions.)
NF E66-199-1996 铣刀.命名法 (Milling cutters. Nomenclature.)
NF E66-200-2-2000 铣刀筒形手柄.第2部分:扁筒形手柄尺寸特性 (Cylindrical shanks for milling cutters - Part 2 : dimensional characteristics of flatted cylindrical shanks.)
NF E66-204-1984 杆传动金属铣刀.与铣刀杆主轴的互换性尺寸 (Milling cutters with tenon drive. Interchangeability dimensions with cutter mandrels.)
NF E66-205-1981 金属铣刀.特性 (MILLING CUTTERS. CHARACTERISTICIS.)
NF E66-208-1977 圆柱柄锥形阴模铣刀 (TAPERED DIE-SINKING CUTTERS WITH PARALLEL SHANKS.)
NF E66-208-2003 直柄锥形凹模铣刀 (Tapered die-sinking cutters with parallel shanks.)
NF E66-209-1977 7/24锥形柄两面刃圆柱形铣刀.标准系列和长系列 (END MILLS 7/24 TAPER SHANKS. STANDARD SERIES AND LONG SERIES.)
NF E66-210-1977 7/24锥形柄开槽铣刀.短系列和标准系列 (SLOT DRILLS WITH 7/24 TAPER SHANKS. STANDARD SERIES AND LONG SERIES.)
NF E66-211-1977 圆柱柄两面刃圆柱形铣刀.标准系列和长系列 (END MILLS WITH PARALLEL SHANKS. STANDARD SERIES AND LONG SERIES.)
NF E66-212-1977 莫氏锥柄两面刃圆柱形铣刀.标准系列和长系列 (END MILLS WITH MORSE TAPER SHANK. STANDARD SERIES AND LONG SERIES.)
NF E66-213-1972 螺纹孔后定中心两面刃圆柱形铣刀 (SHELL END MILLS WITH THREADED BORE AND BACK CENTRING.)
NF E66-214-1984 杆传动两面刃圆柱形铣刀 (Shell end mills with tenon drive.)
NF E66-215-1-2003 端铣刀和槽铣刀.第1部分:直柄铣刀 (End mills and slot drills - Part 1: milling cutters with cylindrical shanks.)
NF E66-215-2-2003 端铣刀和槽铣刀.第2部分:莫氏锥柄铣刀 (End mills and slot drills - Part 2 : milling cutters with Morse taper shanks.)
NF E66-215-3-2003 端铣刀和槽铣刀.第3部分:7/24锥柄铣刀 (End mills and slot drills - Part 3 : milling cutters with 7/24 taper shanks.)
NF E66-216-2002 键传动铣刀.有恒定外形的成形铣刀 (Bore cutters with key drive - Form milling cutters with constant profile.)
NF E66-217-1977 圆柱柄开槽铣刀.短系列和标准系列 (SLOT DRILL WITH PARALLEL SHANKS. SHORT SERIES AND STANDARD SERIES.)
NF E66-218-1977 莫氏锥柄开槽铣刀.短系列和标准系列 (SLOT DRILLS WITH MORSE TAPER SHANK. SHORT SERIES AND STANDARD SERIES.)
NF E66-225-1972 栓传动单面刃开槽铣刀 (SLOTTING CUTTERS WITH KEY DRIVE.)
NF E66-226-1966 键传动平面铣刀 (FACING CUTTERS WITH KEY DRIVE.)
NF E66-227-1968 螺纹孔后定中心45°和60°两面刃锥形铣刀 (SINGLE ANGLE CUTTERS (45 DEGREES AND 60 DEGREES) WITH THREADED BORE AND BACK CENTRING.)
NF E66-228-1977 圆柱柄T形槽铣刀 (T SLOT CUTTERS WITH PARALLEL SHANKS.)
NF E66-229-1975 莫氏锥柄T形槽铣刀 (T SLOT CUTTERS WITH MORSE TAPER SHANKS.)
NF E66-233-1975 粗细齿圈铣刀 (METAL SLITTING SAWS WITH FINE AND COARSE TEETH.)
NF E66-235-1966 链传动.切削齿轮的圆盘铣刀断面 (CHAIN TRANSMISSIONS. PROFILE OF CHAIN WHEEL MODUAL CUTTERS.)
NF E66-236-1966 链传动.切削齿轮的滚刀断面 (CHAIN TRANSMISSIONS. PROFILE OF CHAIN WHEEL HOBS.)
NF E66-237-1984 杆传动表面加工钟形架铣刀 (Bell-shaped face cutters with tenon drive.)
NF E66-239-1975 7/24锥形柄活动齿圆柱铣刀 (INSERTED TOOTH CUTTERS WITH 7/24 TAPER SHANK.)
NF E66-240-1984 杆传动活动齿圆柱铣刀 (Inserted tooth cutters with tenon drive.)
NF E66-241-1979 7/24主轴前部圆柱铣刀.活动齿铣刀 (Milling cutters mounted on centring arbors having a 7/24 taper. Inserted tooth cutters.)
NF E66-242-1977 栓传动等腰铣刀 (DOUBLE EQUAL ANGLE CUTTERS WITH KEY DRIVE.)
NF E66-243-1966 栓传动双面锥形铣刀 (SINGLE ANGLE CUTTERS WITH KEY DRIVE.)
NF E66-244-1975 栓传动直齿圈三面刃铣刀 (SIDE AND FACE CUTTERS WITH STRAIGHT TEETH WITH KEY DRIVE.)
NF E66-245-1975 栓传动变换齿圈三面刃铣刀 (SIDE AND FACE CUTTERS WITH STAGGERED TOOTH WITH KEY DRIVE.)
NF E66-247-1968 后定中心螺纹孔变换齿圈套筒式三面刃铣刀 (SIDE AND FACE CUTTERS WITH ALTERNATE TEETH,WITH THREADED BORE AND BACK CENTRING.)
NF E66-248-1979 7/24主轴前部圆柱铣刀.固定互换性尺寸 (Milling cutters mounted on centring arbors having a 7/24 taper. Fitting dimensions.)
NF E66-249-1974 顶角60°,90°和120°莫氏锥柄倒角铣刀 (MORSE TAPER SHANK COUNTERSINKS FOR ANGLES 60, 90 AND 120 INCLUSIVE.)
NF E66-250-1974 顶角60°,90°和120°圆柱柄倒角铣刀 (PARALLEL SHANK COUNTERSINKS FOR ANGLES 60, 90 AND 120 INCLUSIVE.)
NF E66-252-1-1996 有转位刀片的立铣刀.第1部分:扁平直柄立铣刀 (End mills with indexable inserts. Part 1 : end mills with flatted parallel shank.)
NF E66-252-2-1996 有转位刀片的立铣刀.第2部分:莫氏锥柄立铣刀 (End mills with indexable inserts. Part 2 : end mills with morse taper shank.)
NF E66-253-1996 有转位刀片的面铣刀.尺寸 (Face milling cutters with indexable inserts. Dimensions.)
NF E66-255-1982 硬金属活动刀片铣刀.三面刃铣刀 (MILLING CUTTERS WITH HARDMETAL INDEXABLE INSERTS. SIDE AND FACE MILLING CUTTERS.)
NF E66-265-1994 有直柄的固体硬质合金端铣刀的尺寸 (SOLID HARDMETAL END MILLS WITH PARALLEL SHANK. DIMENSIONS.)
NF E66-266-1-1998 铣刀.名称.第1部分:实心或焊齿带柄端铣刀 (MILLING CUTTERS. DESIGNATION. PART 1 : SHANK TYPE END MILLS OF SOLID OR TIPPED DESIGN.)
NF E66-266-2-1998 铣刀.名称.第2部分:带可分度镶嵌刀片的柄式铣刀和带孔铣刀 (MILLING CUTTERS. DESIGNATION. PART 2 : SHANK TYPE AND BORE TYPE MILLING CUTTERS WITH INDEXABLE INSERTS.)
NF E66-270-2001 高速切削机床用铣刀.安全要求 (Milling cutters for high speed machining - Safety requirements.)
NF E66-303-2000 车刀和刨刀柄.选择形状和尺寸 (Shanks for turning and planning tools - Shapes and dimensions of the section.)
NF E66-305-1969 车刀的金属碳化物刀片 (CARBIDE TIPS FOR TURNING TOOLS.)
NF E66-308-1998 有圆柱形固定孔和圆角的可转位硬质合金刀片.尺寸 (Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions.)
NF E66-310-1991 刀具用活动刀片.名称 (Indexable inserts for cutting tools. Designation.)
NF E66-310/A1-2002 切削刀具用可转位刀片.命名.V型刀片的d和 m公差 (Indexable inserts for cutting tools - Designation - Tolerance of d and m of V-shape inserts.)
NF E66-311-1995 可转位刀片的车刀和仿形刀刀柄和刀片座.名称与牌号 (Turning and copying tool holders and cartridges for indexable inserts. Designation.)
NF E66-312-1995 配用于可转位刀片的镗杆(有柱形刀柄的刀具夹).名称和牌号 (Boring bars (tool holder with cyldindrical shank) for indexable inserts. Designation.)
NF E66-321-1984 自动机床用硬金属刀片 (Hardmetal inserts for tools for turning on automatic machines.)
NF E66-322-1984 车床工具.带硬金属钎焊刀片的自动车刀 (Turning tools. Tools with hardmetal inserts for turning on automatic machines.)
NF E66-327-1991 刀具用活动刀片.圆弧端陶瓷刀片.第1部分:无固定孔刀片的尺寸 (Indexable inserts for cutting tools. Ceramic inserts with rounded corners. Part 1 : dimensions of inserts without fixing hole.)
NF E66-328-1991 刀具用活动刀片.圆弧端陶瓷刀片.第2部分:有圆柱形固定孔的刀片尺寸 (INDEXABLE INSERTS FOR CUTTING TOOLS. CERAMIC INSERTS WITH ROUNDED CORNERS. PART 2 : DIMENSIONS OF INSERTS WITH CYLINDRICAL FIXING HOLE.)
NF E66-344-1999 带可转位刀片的车刀和仿形刀用单刃刀具夹头.尺寸 (Single-point tool holders for turning and copying, for indexable inserts. Dimensions.)
NF E66-345-1995 A型可转位刀片座.尺寸 (Cartridges, type A, for indexable inserts. Dimensions.)
NF E66-346-1999 装转位刀片用镗杆.尺寸 (Boring bars for indexable inserts. Dimensions.)
NF E66-350-1991 活动刀片钻.扁平圆柱手柄 (DRILLS WITH INDEXABLE INSERTS. CYLINDRICAL SHANKS WITH A PARALLEL FLAT.)
NF E66-363-1966 高速钢合金车床刀具.偏刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET SIDE TURNING TOOLS.)
NF E66-364-1966 高速钢合金车床刀具.倒角车刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET TURNING TOOLS FOR CORNER WORK.)
NF E66-365-1966 高速钢合金车床刀具.外圆车刀 (STRAIGTH TURNING TOOLS WITH HIGH SPEED TIPS.)
NF E66-366-1966 高速钢合金车床刀具.宽脸方头车刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. WIDE FACE SQUARE NOSE TURNING TOOLS.)
NF E66-367-1966 高速钢合金车床刀具.切槽刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. PARTING OFF TURNING TOOLS.)
NF E66-368-1966 高速钢合金车床刀具.切断车刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. CUTTING OFF TOOLS.)
NF E66-369-1966 高速钢合金车床刀具.车外螺纹刀具 (TURNING TOOLS WITH SPEED STEEL INSERTS. EXTERNAL THREADING TOOLS.)
NF E66-370-1966 高速钢合金车床刀具.镗刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. BORING TOOLS.)
NF E66-371-1966 高速钢合金车床刀具.镗孔端面刀具 (TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL SIDE TURNING TOOLS.)
NF E66-372-1966 高速钢合金车床刀具.扩孔镗刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. RIGHT ANGLE PARTING OFF TURNING TOOLS.)
NF E66-373-1966 高速钢合金车床刀具.车内螺纹刀具 (TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL THREADING TOOLS.)
NF E66-380-1985 高速钢矫正棒.尺寸 (GROUND HIGH SPEED STEEL TOOL BITS. DIMENSIONS.)
NF E66-405-1983 空气锤工具的连接 (Shanks for pneumatic hammers.)
NF E66-500-1993 切削工具.高速钢组名称与符号 (Cutting tools. Designation of high speed steel groups.)
NF E66-502-1993 切削和研磨的基本量.第一部分:切削工具工作部分几何结构.一般术语:参照系统、工作角度、断屑台 (Basic quantities in cutting and grinding. Part 1 : geometry of the active part of cutting tools. General tems, reference systems, tool and working angles, chip breakers.)
NF E66-506-1985 加工和修整的基本数值.加工时几何和运动学数值 (Basic quantities in cutting and grinding. Geometric and kinematic quantities in cutting.)
NF E66-507-1985 加工和修整的基本数值.力、能量和功率 (Basic quantities in cutting and grinding. Forces, energy, power.)
NF E66-508-1991 切割和研磨的基本量.第5部分:使用砂轮研磨加工用的基本术语 (Basic quantities in cutting and grinding. Part 5 : basic terminology for grinding processes using grinding wheels.)
NF E66-510-1975 车床刀尖的圆弧半径 (Corner radius of single point cutting tools.)
NF E66-511-1989 铣刀寿命试验.第1部分:铣削平面 (TOOL LIFE TESTING IN MILLING. PART 1 : FACE MILLING.)
NF E66-512-1989 铣刀寿命试验.第2部分:端铣 (TOOL LIFE TESTING IN MILLING. PART 2 : END MILLING.)
NF E66-520-7-2000 切割工具的工作带.双工具材料.第7部分:对固态钻孔技术的应用 (Working zones of cutting tools - Couple tool-material - Part 7 : application to drilling technology on solid.)
NF E66-520-8-2000 切割工具的工作带.双工具材料.第8部分:在平面上钻孔的双工具材料方法学 (Working zones of cutting tools - Couple tool-material - Part 8 : couple tool-material methodology in drilling on plain.)
NF E66-531-1996 机床.工具手柄自动夹紧拔销 (Machine tools. Self-holding tapers for tool shanks.)
NF E66-532-1977 连接锥体.莫氏锥正传动 (POSITIVE DRIVE OF MORSE TAPERS.)
NF E66-533-1997 机床切削工具.莫氏锥度柄.带斜键的销槽 (Machine-tools. Morse taper shanks. Cotter slots with taper keys.)
NF E66-534-1970 莫氏锥式刀具转接套筒 (REDUCTION SLEEVES FOR MORSE TAPER TOOLS.)
NF E66-535-1969 莫氏锥式刀具用长套筒 (EXTENSION SOCKETS FOR TOOLS WITH MORSE TAPER SHANKS.)
NF E66-536-1969 钻床卡盘.机体和柄的连接 (DRILL CHUCK TAPERS.)
NF E66-537-1979 杆式圆柱柄刀具的伸长套筒 (SOCKETS FOR PARALLEL SHANK TOOLS WITH DRIVING TENONS.)
NF E66-540-1983 钻床卡盘.键型三爪卡盘.尺寸 (DRILL CHUCKS. KEY TYPE THREE-JAW CHUCK. DIMENSIONS.)
NF E66-541-1983 钻床卡盘.三爪盘用键.尺寸 (DRILL CHUCKS. KEYS FOR THREE-JAW CHUCK. DIMENSIONS.)
NF E66-542-1983 钻床卡盘.键型三爪卡盘.技术规范 (DRILL CHUCKS. KEY TYPE THREE. JAW CHUCK. TECHNICAL SPECIFICATIONS.)
NF E66-545-1983 钻床卡盘.无键自动紧固三爪卡盘.尺寸 (DRILL CHUCKS. THREE JAW,KEYLESS,SELF TIGHTENING CHUCK. DIMENSIONS.)
NF E66-546-1983 钻床卡盘.无键自动紧固三爪卡盘.技术规范 (DRILL CHUCKS. THREE-JAW,KEELESS,SELF TIGHTENING CHUCK. TECHNICAL SPECIFICATIONS.)
NF E66-550-1-1998 带圆柱柄的工具夹.第1部分:圆柱状柄,定位镗孔.技术交货条件 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 1 : CYLINDRICAL SHANK, LOCATION BORE. TECHNICAL DELIVERY CONDITIONS.)
NF E66-550-2-1998 带圆柱柄的工具夹.第2部分:A型,特殊设计的工具夹柄 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 2 : TYPE A, SHANKS FOR TOOL HOLDERS OF SPECIAL DESIGNS.)
NF E66-550-3-1998 带圆柱柄的工具夹.第3部分:B型带矩形放射状底座的工具夹 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 3 : TYPE B WITH RECTANGULAR RADIAL SEAT.)
NF E66-550-4-1998 带圆柱柄的工具夹.第4部分:C型带矩形轴状底座的工具夹 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 4 : TYPE C WITH RECTANGULAR AXIAL SEAT.)
NF E66-550-5-1998 带圆柱柄的工具夹.第5部分:带多于一个矩形底座的D型工具夹 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 5 : TYPE D WITH MORE THAN ONE RECTANGULAR SEAT.)
NF E66-550-6-1998 带圆柱柄的工具夹.第6部分:带圆柱状底座的E型工具夹 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 6 : TYPE E WITH CYLINDRICAL SEAT.)
NF E66-550-7-1998 带圆柱柄的工具夹.第6部分:带锥形底座的F型工具夹 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 7 : TYPE F WITH TAPER SEAT.)
NF E66-550-8-1998 带圆柱柄的工具夹.第8部分:Z型,附件 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 8 : TYPE Z, ACCESSORIES.)
NF E66-551-1968 车床用刀架 (LATHE TOOL POSTS.)
NF E66-611-1983 内面拉削刀具.前挂钩.形状和尺寸 (Internal broaching tools. Pull ends.)
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183] [184] [185] [186] [187] [188] [189] [190] [191] [192] [193] [194] [195] [196] [197]