目录 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN
NF——法国标准化协会目录
编号 中文名称 英文名称
NF C45-210-1974 电气继电器.非定时限或自定时限的单输入激励量量度继电器 (Electrical relays. Single input energizing quantity measuring relays with non-specified time or with independent specified time.)
NF C45-211-1985 继电器.用指定时间测量单向输入能量用的继电器 (Electrical relays. Single input energizing quantity measuring relays with dependent specified time.)
NF C45-211/A1-1985 NF C 45-211-1977的补充1 ()
NF C45-2111-1985 C45-211-77的补充1 ()
NF C45-213-1998 继点器.第3部分:依赖时间或非依赖时间的单输入引擎质量测量继电器 (Electrical relays. Part 3 : single input energizing quantity measuring relays with dependent or independent time.)
NF C45-215-2001 继电器.第5部分:测量继电器和保护设备的绝缘协调性.要求和试验 (Electrical Relays - Part 5 : insulation coordination for measuring relays and protection equipment - Requirements and tests.)
NF C45-218-1998 继电器.第8部分:热电气继电器 (Electrical relays. Part 8 : thermal electrical relays.)
NF C45-250-1999 非定时限有或无机电继电器.第1部分:一般要求 (Electromechanical non-specified time all-or-nothing relays. Part 1 : general requirements.)
NF C45-251-1983 继电器.一般用继电器.第1部分:瞬时(不规定时间)“与或非“继电器 (ELECTRICAL RELAYS. GENERAL PURPOSE RELAYS. PART 1 : ALL-OR-NOTING RELAYS WITH NON-SPECIFIED TIME. QUALIFICATION STANDARD.)
NF C45-252-1983 继电器.接线端的标志 (Electrical relays. Terminal marking.)
NF C45-253-1997 工业用规定时间继电器.第1部分;要求和试验 (Specified time relays for industrial use. Part 1 : requirements and tests.)
NF C45-25311-1999 NF C45-253-97的补充件11 ()
NF C45-255-10-2003 经质量评定的机电式单继电器.第10部分:分规范.工业用继电器 (Electromechanical elementary relays of assessed quality - Part 10 : sectional specification - Relays for industrial application.)
NF C45-255-11-2003 经质量评定的机电式单继电器.第11部分:空白详细规范.工业用继电器 (Electromechanical elementary relays of assessed quality - Part 11 : blank detail specification - Relays for industrial application.)
NF C45-255-1999 质量评定的机电式无时间规定的“有“或“无”继电器.第1部分:一般规范 (Electromechanical non-specified time all-or-nothing relays of assessed quality - Part 1 : generic specification.)
NF C45-255-50-2003 机电式“有“或“无“继电器.第50部分:分规范.经质量评定的机电式“有“或“无“电信继电器 (Electromechanical all-or-nothing relays - Part 50 : sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality.)
NF C45-255-51-2003 机电式“有“或“无“继电器.第51部分:空白详细规范.经质量评定的机电式“有“或“无“电信继电器.非标准类 (Electromechanical all-or-nothing relays - Part 51 : blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction.)
NF C45-255-52-2003 机电式“有“或“无“继电器.第52部分:空白详细规范.经质量评定的机电式“有“或“无“电信继电器.20 mm X (Electromechanical all-or-nothing relays - Part 52 : blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20 mm x 10 mm base.)
NF C45-255-53-2003 机电式“有“或“无“继电器.第53部分:空白详细规范.经质量评定的机电式“有“或“无“电信继电器.14 mm X (Electromechanical all-or-nothing relays - Part 53 : blank detail specification -Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base.)
NF C45-255-54-2003 机电式“有“或“无“继电器.第54部分:空白详细规范.经质量评定的机电式“有“或“无“电信继电器.15 mm X (Electromechanical all-or-nothing relays - Part 54 : blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base.)
NF C45-255-55-2003 机电式“有“或“无“继电器.第55部分:空白详细规范.经质量评定的机电式“有“或“无“电信继电器.11 mm X (Electromechanical all-or-nothing relays - Part 55 : blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) b)
NF C45-256-1983 恶劣环境条件下用控制失效率作质量评估的继电器 (Relays of assessed quality with control failure rate for severe environmental conditions.)
NF C45-300-1991 电子器件质量评定协调体系.有或无机电继电器.总规范 (Harmonized system of quality assessment for electronic components. Electromechanical all-or-nothing relays. Generic specification.)
NF C45-310-1982 “CENELEC”质量保证体系.与或非机电继电器.中等规范 (HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. SECTIONAL SPECIFICATION. ELECTROMECHANICAL ALL-OR-NOTHING RELAYS.)
NF C45-311-1982 电子器件质量评定协调体系.S空白详细规范.有或无机电继电器 (Harmonized system of quality assessment for electronic component.S blank detail specification. Electromechanical all-or-no thing relays.)
NF C45-330-2002 带强制引导触点(机械链接)的继电器 (Relays with forcibly guided (mechanically linked) contacts.)
NF C45-340-1998 测量继电器和防护设备.防护通信界面.第1部分:通则 (Measuring relays and protection equipment. Protection communication interfacing. Part 1 : general.)
NF C46-001-1993 工业过程测量与控制设备.运行条件.第1部分:气候条件 (Industrial-process measurement and control equipment. Operating conditions. Part 1 : climatic conditions.)
NF C46-002-1997 工业过程测量和控制装置的工作条件.第2部分:动力 (Operating conditions for industrial-process measurement and control equipment. Part 2 : power.)
NF C46-003-1997 工业过程测量与控制设备运行条件.第3部分:机械影响(欧洲标准EN 60 654-3) (Operating conditions for industrial-process measurement and control equipment. Part 3 : mechanical influences.)
NF C46-004-1997 工业过程测量与控制设备运行条件.腐蚀性和糜烂性影响 (Operating conditions for industrial-process measurement and control equipment. Part 4 : corrosive and erosive influences.)
NF C46-025-1-1996 过程测量和控制装置.性能评定的一般方法和程序.第1部分:一般考虑 (Process measurement and control devices. General methods and procedures for evaluating performance. Part 1 : general considerations.)
NF C46-025-2-1996 过程测量与控制装置.性能评定的一般方法和程序.第2部分:在标准条件下的测试 (Process measurement and control devices. General methods and procedures for evaluating performance. Part 2 : tests under reference conditions.)
NF C46-025-3-1998 过程测量和控制装置.性能评定的一般方法和程序.第3部分:影响数量效果的试验 (Process measurement and control devices. General methods and procedures for evaluating performance. Part 3 : tests for the effects of influence quantities.)
NF C46-025-4-1996 过程测量和控制装置.性能评定方法和步骤.第4部分:评估报告内容 (Process measurement and control devices. General methods and procedures for evaluating performance. Part 4 : evaluation report content.)
NF C46-050-1997 测量、控制和实验室用电磁兼容性要求的电气设备.第1部分:一般要求 (Electrical equipment for measurement, control and laboratory use EMC requirements. Part 1 : general requirements.)
NF C46-050/A1-1998 NF EN 61326-1997的修改1 ()
NF C46-050/A2-2001 试验室使用控制和测量的电气设备.EMC要求 (Electrical equipment for measurement, control and laboratory use - EMC requirements.)
NF C46-0501-1998 NF C46-050-97的补充件1 ()
NF C46-061-2002 电气/电子/可编程序的电子安全相关系统的功能安全.第1部分:一般要求 (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1 : general requirements.)
NF C46-062-2002 电气/电子/可编程序的电子安全相关系统的功能安全.第2部分:电气/电子/可编程序的电子安全相关系统的要求 (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2 : requirements for electrical/electronic/programmable electronic safety-related systems.)
NF C46-063-2002 电气/电子/可编程序的电子安全相关系统的功能安全.第3部分:软件要求 (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3 : software requirements.)
NF C46-064-2002 电气/电子/可编程序的电子安全相关系统的功能安全.第4部分:定义和缩写 (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4 : definitions and abbreviations.)
NF C46-065-2002 电气/电子/可编程序的电子安全相关系统的功能安全.第5部分:安全整体水平测定方法的实例 (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5 : examples of methods for the determination of safety integrity levels.)
NF C46-066-2002 电气/电子/可编程序的电子安全相关系统的功能安全.第6部分:IEC 61508-2和IEC 61508-3的应用指南 (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6 : guidelines on the application of IEC 61508-2 and IEC 61508-3.)
NF C46-067-2002 电气/电子/可编程序的电子安全相关系统的功能安全.第7部分:技术和测量综述 (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7 : overview of techniques and measures.)
NF C46-101-1984 工业过程中的测量与控制.直流电模拟信号 (Industrial-process measurement and control. Analogue D.C. current signals.)
NF C46-102-1993 处理控制系统用模拟气动信号 (Analogue pneumatic signal for process control systems.)
NF C46-205-1994 金属封壳的热电流表 (Dimensions of metal-sheathed thermometer elements.)
NF C46-206-1994 测量,控制和调节.电气温度传感器.TC设备用金属防护管 (Measurement, control, regulation. Electrical temperature sensors. Metal protecting tubes for tc assemblies.)
NF C46-207-1994 测量,控制和调节.电气温度传感器.热耦合件的绝缘管 (Measurement, control, regulation. Electrical temperature sensors. Isolating tubes for thermocouples.)
NF C46-225-1994 过程分析手工取样系统的性能表达式 (Expression of performance of sample handling systems for process analyzers.)
NF C46-251-1994 气体分析仪性能表示.第1部分:通则 (Expression of performance of gas analyzers. Part 1 : general.)
NF C46-252-1994 气体分析器性能表示.第2部分:氧气(高温电化学感应器)(EN 61 207-2) (Expression of performance of gas analyzers. Part 2 : oxygen in gas (utilizing high-temperature electrochemical sensors).)
NF C46-253-2002 气体分析仪性能表示.第3部分:顺磁氧分析仪 (Gas analysers - Expression of performance - Part 3 : paramagnetic oxygen analysers.)
NF C46-256-1994 气体分析器性能表示.第6部分:光度计分析器(EN 61 207-6) (Expression of performance of gas analysers. Part 6 : photometric analyzers.)
NF C46-260-1995 工业过程控制.分析器装置的安全 (Industrial-process control. Safety of analyser houses.)
NF C46-300-2001 差压测量仪器和高达413巴(41,3 MPa)的法兰连接的关闭装置间的配合尺寸 (Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa).)
NF C46-303-1999 工业过程控制系统用传输机.第1部分:性能评估方法 (Transmitters for use in industrial-process control systems. Part 1 : methods for performance evaluation.)
NF C46-304-1991 用于工业过程管道的传感器.单个系列试验和检验指南 (Transmitters for use in industrail-process control systems. Guidance for inspection and routing testing.)
NF C46-401-1993 工业过程控制系统用模拟信号控制器.第1部分:性能评估方法 (Controllers with analogue signals for use in industrial-process control systems. Part 1 : methods of evaluating the performance.)
NF C46-402-1993 工业过程控制系统中用模拟信号控制器.第2部分:检验和常规试验指南 (Controllers with analogue signals for use in industrial-process control systems. Part 2 : guidance for inspection and routine testing.)
NF C46-410-1993 工业处理控制系统用电动和气动模拟图表记录仪性能评定方法 (Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems.)
NF C46-415-1993 工业流程控制系统.带模拟输入和两个或多个静态输出的仪器.第1部分:性能评估方法 (Industrial-process control systems. Instruments with analogue inputs and two- Or multi-state outputs. Part 1 : methods of evaluating the performance.)
NF C46-421-1996 工业过程控制系统.鉴定用自适应控制器的分类 (Industrial-process control systems. Classification of adaptive controllers for the purpose of evaluation.)
NF C46-500-2002 工业过程控制系统.带气压输出的阀位控制器性能评估方法 (Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs.)
NF C46-502-1993 工业过程用调节阀.第1部分:术语和概论 (Industrial-process control valves. Part 1 : control valve terminology and general considerations.)
NF C46-503-1999 工业过程调节阀.第2-1部分:流量.在安装条件下液体流量的截面方程 (Industrial-process control valves. Part 2-1 : flow capacity. Sizing equations for fluid flow under installed conditions.)
NF C46-505-1998 绝缘过程控制阀.第2-3部分:流量容量.试验过程 (Industrial-process control valves. Part 2-3 : flow capacity. Test procedures.)
NF C46-506-1990 工业过程用调节阀.流量.流量的特性和校正的固有系数 (Industrial-process control valves. Flow capacity. Inherent flow characteristics and rangeability.)
NF C46-510-2001 工业过程控制阀.第3-1部分:尺寸.双通球型直立式控制法兰阀门的面对面尺寸和双通球型角度控制法兰阀门的中心 (Industrial-process control valves - Part 3-1 : dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, a)
NF C46-511-2001 工业过程控制阀.第3-2部分:尺寸.蝶阀除外的旋转控制阀门的面对面尺寸 (Industrial-process control valves - Part 3-2 : dimensions - Face-to-face dimensions for rotary control valves except butterfly valves.)
NF C46-512-1999 工业处理控制阀.第3-3部分:尺寸.对焊接的头尾相接尺寸.两接头球型直接式控制阀(欧洲标准EN 60534-3-3) (Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.)
NF C46-519-2001 工业过程控制阀.第8部分:噪声考虑.第1节:实验室测量气动流经控制阀产生的噪声 (Industrial-process control valves - Part 8 : noise considerations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.)
NF C46-520-1993 工业过程控制阀.第8部分:噪声问题.第2节:通过控制阀的液压流动产生的噪声的实验室测量 (Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.)
NF C46-521-2001 工业过程控制阀.第8部分:噪声问题.第3节:气动控制阀噪声预测法 (Industrial-process control valves - Part 8-3 : noise considerations - Control valves aerodynamic noise prediction method.)
NF C46-522-1994 工业处理控制阀.第8部分:噪声条款.第4节:液压流动产生的噪声预定(EN 534-8-4) (Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.)
NF C46-525-1991 工业过程用调节阀,调节阀门的限定栅屏 (Industrial-process control valves. Control valve data sheet.)
NF C46-531-2001 工业过程控制阀.第6-2部分:定位器装到控制阀的安装细则.旋转传动装置上安装的定位器 (Industrial-process control valves - Part 6-2 : mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators.)
NF C46-600-1997 一般目的领域通讯系统(欧洲标准EN50 170) (General purpose field communication system.)
NF C46-600/A1-2002 通用现场通信系统 (General purpose field communication system.)
NF C46-600/A2-2000 通用区域通信系统.修改件A2 (General purpose field communicaation system.)
NF C46-600/A3-2002 通用现场通信系统 (General purpose field communication system.)
NF C46-603-1990 发送器,致动器和可编程序控制器间信息交换用文件传送协议总线.数据链层 (Fip bus for exchange of information between transmitters, actuators and programmable controllers. Data link layer.)
NF C46-603/A1-1991 NF C 46-603-1990的补充件1 ()
NF C46-6031-1991 NF C46-603-90标准的补充1 ()
NF C46-604-1994 工业控制系统用范围总线标准.弟2部分:物理层分类和操作 (Fieldbus standard for use in industrial control systems. Part 2 : physical layer specification and service definition.)
NF C46-604/A1-1996 NF EN 61158-2-1993的修改1 ()
NF C46-604/A2-1997 NF EN 61158-2-1994的修改2 ()
NF C46-6041-1996 NF C46-604-94补充件 ()
NF C46-6042-1997 NF C46-604-94的补充件2 ()
NF C46-607-1991 发送器.致动器和程序控制装置之间FIP信息交换用的总线.光导纤维上的带状物理层 (Fip bus for exchange of information between transmitters, actuators and programmable controllers. Fiber optic physical layer.)
NF C46-607/A1-1993 NF C 46-607-1991的补充件1 ()
NF C46-6071-1993 NF C46-607-1991的补充件1 ()
NF C46-613-1994 可编程控制器.第1部分:一般信息 (Programmable controllers. Part 1 : general information.)
NF C46-614-1994 程序控制器.第2部分:设备要求和试验 (Programmable controllers. Part 2 : equipment requirements and test.)
NF C46-614/A1-1996 NF EN 61131-2-1994的修改件1 ()
NF C46-614/A2-2000 程序控制器.第2部分:设备要求和试验 (Programmable controllers - Part 2 : equipment requirements and test.)
NF C46-6141-1996 NF C46-614-1994的补充件1 ()
NF C46-615-2003 程序控制器.第3部分:程序设计语言 (Programmable controllers - Part 3 : programming languages.)
NF C46-617-2001 可编程控制器.第5部分:通信 (Programmable controllers - Part 5 : communications.)
NF C46-619-2001 可编程控制器.第7部分:模糊控制编程 (Programmable controllers - Part 7 : fuzzy control programming.)
NF C46-630-1998 工业过程控制阀.第6部分:控制阀与定位器连接用安装细节.第1节:线性传动装置上安装的定位器 (Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positioner mounting on linear actuators.)
NF C46-638-1999 小数据包用高效通信子系统 (High efficiency communication subsystem for small data packages.)
NF C46-640-1993 工业过程测量与控制.系统评定用系统性能的评价.第1部分:一般考虑和方法学 (Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 1 : general considerations and methodology.)
NF C46-640-2-1994 工业处理测量和控制.系统评估用系统性能评定.第2部分:评估方法 (Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 2 : assessment methodology.)
NF C46-640-3-1996 工业过程测量与控制.系统评定用系统性能的评价.第3部分:系统功能性评定 (Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 3 : assessment of system functionality.)
NF C46-640-4-1998 工业过程测量与控制.系统评定用系统性能的评价.第4部分:系统性能评定 (Industrial process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 4 : assessment of system performance.)
NF C46-640-5-1995 工业过程测量与控制.系统评定用系统性能的评价.第5部分:系统可信性评定 (Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 5 : assessment of system dependability.)
NF C46-640-6-1998 工业过程测量与控制.系统评定用系统性能的评价.第6部分:系统操作性评定 (Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 6 : assessment of system operability.)
NF C46-640-7-1999 工业过程测量和控制.系统评定的系统特性评估.第7部分:系统安全评定 (Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7 : assessment of system safety.)
NF C46-640-8-1999 工业过程测量和控制.系统评定的系统特性评估.第8部分:非作用相关系统特性 (Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8 : assessment of non-task-related system properties.)
NF C46-650-1999 分批控制.第1部分:模型和术语 (Batch control - Part 1 : models and terminology.)
NF C46-651-2003 分批控制.第2部分:数据结构和语言导则 (Batch control - Part 2 : data structure and guidelines for languages.)
NF C46-660-1-2003 控制器装置接口用的基于ISO 11898的工业通信子系统.第1部分:一般要求 (Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1 : general requirements.)
NF C46-660-2-2001 控制装置接口用基于ISO 11898的工业通信系统.第2部分:装置网 (Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 2 : DeviceNet.)
NF C46-660-3-2001 控制器装置接口用的基于ISO 11898的工业通信子系统.第3部分:智能分布系统 (Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 3 : Smart Distributed System (SDS).)
NF C46-660-4-2003 控制器装置接口用的基于ISO 11898的工业通信子系统.第4部分:CANopen (Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 4 : CANopen.)
NF C46-800-2003 海上导航和无线电通信设备及系统.一般要求.测试方法和要求的测试结果 (Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results.)
NF C46-801-1993 海上自动雷达测绘辅助设备(ARPA).操作要求.试验方法和试验结果 (Marine automatic radar plotting aids (ARPA). Operational requirements. Methods of testing and test results.)
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183] [184] [185] [186] [187] [188] [189] [190] [191] [192] [193] [194] [195] [196] [197]