目录 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN
NF——法国标准化协会目录
编号 中文名称 英文名称
NF T57-215-1996 塑料管道系统.玻璃增强热固性塑料管和配件接头.挠性和铰链接头耐泄漏和损伤试验方法 (Plastics piping systems. Joints for glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints.)
NF T57-216-1996 塑料管道系统.玻璃增强热固塑料管和配件.挠曲条件下部件内部耐化学侵蚀性的测定 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Determination of the resistance to chemical attack from the inside of a section in a deflected condition.
NF T57-217-1996 塑料管道系统.玻璃纤维增强热固性塑料管.潮湿条件下蠕变因子的测定和长期指定环的硬度的计算 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness.
NF T57-218-1996 塑料管道系统.玻璃纤维增强热固塑料(GFK).检验原有环挠曲的试验方法 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Test method to prove the resistance to initial ring deflection.
NF T57-219-1999 塑料管道系统. 玻璃增强的热固塑料管(GRP).在潮湿条件下长临界相关环变形的测定(EN 1227) Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate relative ring deflection under wet conditions.
NF T57-220-1996 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管.测定指定环初始硬度 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial specific ring stiffness.
NF T57-221-1996 塑料管道系统.玻璃纤维增强热固塑料管和配件.短期内部压力下管壁密封性的检验的试验方法 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods to prove the leaktightness of the wall under short-term internal pressure.
NF T57-222-1996 塑料管道系统.玻璃纤维增强热固塑料管.初始纵向拉伸性能的测定 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial longitudinal tensile properties.
NF T57-223-1996 塑料管道系统.玻璃增强热固性塑料(GRP)管.初期表面抗拉强度的测定 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination O the apparent initial circumferential tensile strength.
NF T57-224-1997 塑料管道系统.玻璃纤维增强热固性塑料(GRP)构件.检验带有弹性密封件的刚性锁定的管套筒接头设计的试验方法 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals.
NF T57-225-1997 塑料管道系统.玻璃纤维增强热固性塑料件.验证胶合管套筒接头设计的测试方法 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of cemented socket-and-spigot joints.
NF T57-226 1-1999 1996年NF T 57-226的补充件1
NF T57-226-1996 塑料管道系统.玻璃增强热固性塑料部件.栓结法兰联轴节的设计验证试验方法 (Plastics piping systems. Glas-reinforced thermosetting plastics (grp) components. Test methods to prove the design of bolted flange joints.)
NF T57-226/A1-1999 NF EN 1450-1999的修改件1 ()
NF T57-2261-1999 1996年NF T 57-226的补充件1 ()
NF T57-227-1997 塑料管道系统.玻璃增强热固性塑料(GRP)管.周期性内部压力影响的试验方法 (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure.)
NF T57-229-1997 塑料管道系统.玻璃纤维增强热固性塑料管.在化学环境下存放后相对弯曲蠕变系数的测定 (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment.)
NF T57-303-1989 塑料.碳纤维增强复合材料.层间剪切应力的测定.短跨距弯曲的方法 (PLASTICS. CARBON REINFORCED COMPOSITES. DETERMINATION OF INTERLAMINAR SHEAR STRENGTH. FLEXURE METHOD WITH SHORT SPAN LENGHT.)
NF T57-402-1998 织物增强塑料复合物.通过加上最小45级拉力试验方法对水平剪切应力/剪切拉力反应包括水平剪切模式和强度的测 (FIBRE-REINFORCED PLASTIC COMPOSITES. DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE PLUS OVER MINUS 45 DEGREES TENSION TEST METHOD. (EUROPEAN STANDARD EN ISO 14129).)
NF T57-404-2002 纤维增强塑料复合材料.无定向性增强材料的模型I层间断裂韧度G (Fibre-reinforced composites - Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials.)
NF T57-500-1989 塑料.聚酯胶片.术语定义和牌号的符号 (Plastics. Prepregs. Definitions of terms and symbols for designations.)
NF T57-502-1995 增强纤维.玻璃纤维.丙酮中溶解物百分率的测量.烧瓶法 (Reinforcement fibres. Glass fibre. Measurement of the percentage of soluble sizing in acetone. Flask method.)
NF T57-513-1973 玻璃织物增强塑料.聚酯树脂预浸垫.塑性的测定 (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PRE-IMPREGNATED MATS BASED ON POLYESTER RESINS. PLASTICITY.)
NF T57-514-1973 玻璃织物增强塑料.聚酯树脂预浸垫.可模制性 (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PRE-IMPREGNATED MATS BASED ON POLYESTER RESINS. MOULDABILITY.)
NF T57-515-1973 玻璃织物增强塑料.聚酯树脂预浸垫.膨胀性测定 (PRE-IMPREGNATED PRODUCTS BASED ON MATS MADE OF GLASS AND POLYESTER RESINS. MEASUREMENT OF EXPANSION.)
NF T57-530-1991 塑料.预浸渍.由BMC和DMC物质构成的铸模用混合料 (PLASTICS. PREPREGS. BULK MOULDING COMPOUND (BMC) AND DOUGH MOULDING COMPOUND (DMC). BASIS FOR A SPECIFICATION.)
NF T57-540-1-2003 增强的热塑性模塑复合材料.GMT规范.第1部分:名称与符号 (Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1 : designation.)
NF T57-540-2-2003 增强的热塑性模塑复合材料.GMT规范.第2部分:试验方法和一般要求 (Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2 : methods of test and general requirements.)
NF T57-540-3-2003 增强的热塑性模塑复合材料.GMT规范.第3部分:特定要求 (Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3 : specific requirements.)
NF T57-555-1973 玻璃织物增强塑料.环氧树脂预浸织物.拉力和剪力方法测定对铜的附着力 (PRE-IMPREGNATED GLASS FABRICS BASED ON EPOXY RESINS : DETERMINATION OF ADHESION ON COPPER BY A METHOD INVOLVING SHEARING UNDER TRACTION.)
NF T57-556-1973 玻璃织物增强塑料.预浸玻璃织物.加压和焙烧后预浸层厚度的测定 (PRE-IMPREGNATED GLASS FABRICS. DETERMINATION OF THE THICKNESS OF A LAYER OF PRE-IMPREGNATED PRODUCT AFTER PRESSING AND CURING.)
NF T57-557-1973 玻璃织物增强塑料.预浸玻璃织物.焙烧损失的测定 (PRE-IMPREGNATED GLASS FABRICS. DETERMINATION OF LOSS THROUGH CALCINATION.)
NF T57-559-1975 玻璃织物增强塑料.环氧树脂预浸玻璃织物.粘合时间 (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS - PRE IMPREGNATED GLASS FABRICS BASED ON EPOXY RESINS - BINDING TIME.)
NF T57-571-1984 玻璃织物增强塑料.预浸件.台布.纱、压层件.焙烧损失的测定 (GLASS FIBRE REINFORCED PLASTICS. PREIMPREGNATED MATS,YARNS AND ROVINGS. DETERMINATION OF IGINITION LOSS.)
NF T57-608-1999 纤维增强塑料.模压化合物和聚酯胶片.树脂、增强纤维和矿物填料含量的测定.溶解方法 (Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforced-fibre and mineral-filler content. Dissolution methods.)
NF T57-615-1997 纤维增强塑料.热固模塑混合物和预浸料.流动性和贮藏寿命的测定(欧洲标准EN ISO 12115) (FIBRE-REINFORCED PLASTICS. THERMOSETTING MOULDING COMPOUNDS AND PREPREGS. DETERMINATION OF FLOWABILITY AND SHELF LIFE. (EUROPEAN STANDARD EN ISO 12115).)
NF T57-616-2001 复合材料.预浸料坯.树脂流测定 (Composites - Prepregs - Determination of resin flow.)
NF T57-800-1-2003 增强塑料复合材料.挤拉制型材规范.第1部分:命名 (Reinforced plastics composites - Specifications for pultruded profiles - Part 1 : designation.)
NF T57-800-2-2003 增强塑料复合材料.挤拉制型材规范.第2部分:试验方法和一般要求 (Reinforced plastics composites - Specifications for pultruded profiles - Part 2 : methods of test and general requirements.)
NF T57-800-3-2003 增强塑料复合材料.挤拉制型材规范.第3部分:特殊要求 (Reinforced plastics composites - Specifications for pultruded profiles - Part 3 : specific requirements.)
NF T57-900-1987 增强塑料物质制贮器和设备结构规定 (GLASS-REINFORCED PLASTIC TANKS AND APPARATUS. CONSTRUCTION CODE.)
NF T57-901-1997 玻璃纤维增强塑料(GRP)制地下油罐.单面处于液体环境的试验方法 (Underground tanks of glass-reinforced plastics (GRP). Method for one side exposure to fluids.)
NF T57-902-1997 玻璃纤维增强塑料(GRP)制地下油罐.系数α和β的测定 (Underground tanks of glass-reinforced plastics (GRP). Determination of factor alpha and factor beta.)
NF T58-000-1987 塑料.(热固塑料和热塑)塑料模制件适用公差 (Plastics. Tolerances applicable to the plastics moulded parts (thermosetting and thermoplastic).)
NF T58-003-1994 塑料.热塑材料取样用压模 (Plastics. Compression moulding test specimens of thermoplastic materials.)
NF T58-003-2003 塑料.热塑材料的压塑试样 (Plastics - Compression moulding test specimens of thermoplastic materials.)
NF T58-004-1997 塑料.多用途试验用试样 (Plastics. Multipurpose-test specimens.)
NF T58-005-1998 塑料.热固性材料试样的压缩模制 (Plastics. Compression moulding of test specimens of thermosetting materials.)
NF T58-100-1971 塑料.金属表面涂层.干法塑料.涂层规范形式 (PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS.(DRY APPLICATION). SPECIFICATION.)
NF T58-110-1971 塑料.金属表面涂层.干法塑料涂层.厚度检验 (PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS. METHODS OF THICKNESS DETERMINATION.)
NF T58-112-1971 金属表面涂层.塑料涂层.剥离法检验附着力 (PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS. ADHESION TEST.)
NF T58-202-1-2000 焊接固定常压热塑性槽罐.第1部分:总则 (Welded static non-pressurised thermoplastic tanks - Part 1 : general principles.)
NF T58-202-2-2000 焊接固定常压热塑性槽罐.第2部分:立式圆柱形槽罐的计算 (Welded static non-pressurised thermoplastic tanks - Part 2 : calculation of vertical cylindrical tanks.)
NF T58-202-3-2000 焊接固定常压热塑性槽罐.第3部分:单层壁的长方形槽罐的设计和计算 (Welded static non-pressurised thermoplastic tanks - Part 3 : design and calculation for single skin rectangular tanks.)
NF T58-202-4-2000 焊接固定常压热塑性槽罐.第4部分:法兰连接的设计和计算 (Welded static non-pressurised thermoplastic tanks - Part 4 : design and calculation of flanged joints.)
NF T60-100-1996 石油产品.透明和不透明液体.运动粘度的测定和动力粘性的计算 (Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity.)
NF T60-101-1998 原油和液体石油产品.密度的实验室测定.密度计法 (Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method.)
NF T60-102-1996 润滑脂.滴点测定 (Lubricating greases. Determination of the dropping point.)
NF T60-103-1968 石油产品.润滑脂和燃烧油在密封容器中闪点的测定 (PETROLEUM PRODUCTS. CLOSED CUP FLASH POINT OF LUBRICANTS AND FUEL OILS.)
NF T60-104-1998 石油产品.颜色的测定(ASTM刻度) (Petroleum products. Determination of colour (ASTM scale).)
NF T60-105-1996 石油产品.流点测定 (Petroleum products. Determination of pour point.)
NF T60-106-2001 液态石油产品.未用和使用过的润滑油中杂质、磨损金属和添加素的测定.感应耦合等离子体原子发射光谱法(ICP (Liquid petroleum products - Determination of additive elements, wear metals and contaminants in unused and used lubricating oils - Method by inductively coupled plasma atomic emission spectroscopy (IC)
NF T60-107-1999 玻璃毛细动态粘度计.规范和操作说明 (Glass capillary kinematic viscometers. Specifications and operating instructions.)
NF T60-109-1970 石油产品.爆炸法测定石油产品和润滑脂中硫的含量 (PETROLEUM PRODUCTS. DETERMINATION OF SULPHUR IN PETROLEUM PRODUCTS AND LUBRICANTS BY THE BOMB METHOD.)
NF T60-110-1-2000 石油产品.皂化值的测定.第1部分:颜色指示剂滴定法 (Petroleum porducts - Determination of saponification number - Part 1 : colour-indicator titration method.)
NF T60-110-2-2000 石油产品.皂化值的测定.第2部分:电势滴定法 (Petroleum products - Determination of saponification number - Part 2 : potentiometric titration method.)
NF T60-111-1999 石油基润滑油.老化特性.用康拉孙(法)测定氧化后残碳的变化 (Petroleum-based lubricating oils - Ageing characteristics - Determination of change in Conradson carbon residue after oxidation.)
NF T60-112-1997 石油产品和润滑剂.酸值和碱值的测定.彩色指示剂滴定法 (Petroleum products and lubricants. Determination of acid or base number. Colour-indicator titration method.)
NF T60-113-1986 石油产品.水含量的测定.蒸馏法 (Petroleum products. Determination of water content. Distillation method.)
NF T60-114-1970 石油产品.石蜡熔点的测定 (PETROLEUM PRODUCTS. MELTING POINT OF PARAFFINS.)
NF T60-115-1982 石油产品.用标准正庚烷测定沉淀沥青 (PETROLEUM PRODUVTS. DETERMINATION OF ASPHALTENES PRECIPITATED BY NORMAL HEPTANE.)
NF T60-116-2002 石油产品.碳残渣的测定.康拉逊(Conoadson)法 (Petroleum products - Determination of carbon residue - Conradson method.)
NF T60-117-1982 石油产品.兰氏残炭的测定 (Petroleum products. Determination of the ramsbottom residue .)
NF T60-118-2001 闪点和燃点的测定.克利弗兰得(Cleveland)开杯法 (Determination of flash and fire points - Cleveland open cup method.)
NF T60-119-2003 石油产品.石蜡产品锥入度的测定 (Petroleum products - Determination of cone penetrability of paraffinic products.)
NF T60-120-1972 石油产品.石油的蜡和石蜡中油含量的测定 (DETERMINATION OF OIL CONTENT IN PARAFFINS AND PETROLEUM WAXES.)
NF T60-121-1976 石油产品.矿脂、原矿脂和石油蜡常规焙点的测定 (DETERMINATION OF THE CONVENTIONAL MELTING POINT OF PETROLEUM JELLY,CRUDE PETROLEUM JELLY AND PETROLEUM WAX.)
NF T60-121-2003 石油产品.石油蜡和矿脂常规溶点的测定 (Petroleum products - Determination of the conventional melting point of petroleum waxes and petroleum jellies.)
NF T60-123-1972 石油产品.石蜡和蜡针入度的测定 PETROLEUM PRODUCTS. DETERMINATION OF NEEDLE PENETRATION OF PARAFFINS AND WAXES.
NF T60-124-1959 石油和石油产品.石蜡和石油蜡含量的测定.硬过滤器等直径孔测量法 (PETROLEUMS AND DERIVATIVES. OIL CONTENT OF PARAFFINS AND PETROLEUM WAXES. METHOD OF MEASURING THE EQUIVALENT DIAMETER OF PORES OF RIGID FILTERS.)
NF T60-125-1979 石油产品.涡轮机油的反乳化 (PETROLEUM PRODUCTS. DE EMULSION OF TURBINE OILS.)
NF T60-125-2001 石油产品.矿物油和合成液体水分离性的测定 (Petroleum products - Determination of water separability of petroleum oils and synthetic fluids.)
NF T60-126-1999 石油产品.矿物油.油对水界面张力的测定.圆环法 (Petroleum products - Mineral oils - Determination of interfacial tension of oil against water - Ring method.)
NF T60-127-1974 石油产品.石油蜡和石蜡抗控强度的测定 (TENSILE STRENGTH OF PARAFFIN WAX.)
NF T60-128-1974 石油产品.石蜡、蜡、矿脂和矿脂蜡凝点的测定 (Congelating point of petroleum waxes, including petrolatum.)
NF T60-129-1998 石油产品.润滑油发泡特性的测定 (Petroleum products. Determination of foaming characteristics of lubricating oils.)
NF T60-133-1988 石油产品.润滑脂的游离酸度和碱度 (PETROLEUM PRODUCTS. ACIDITY AND ALKALINITY OF LUBRICANT GREASES.)
NF T60-134-2000 蜡和石蜡.石蜡中可碳化物质(定性试验) (Waxes and paraffin waxes - Carbonizable substances in paraffin wax (qualitative test).)
NF T60-135-1998 石油产品和润滑剂.润滑油的防锈特性的测定 (Petroleum products and lubricants. Determination of rust-prevention characteristics of lubricating greases.)
NF T60-136-1979 石油产品.由运动粘度计算粘度指数 (PETROLEUM PRODUCTS. CALCULATION OF VISCOSITY INDEX FROM KINEMATIC VISCOSITY.)
NF T60-138-2004 石油及相关产品.与热表层接触的流体易燃性特征的测定.歧管点火试验 (Petroleum and related products - Determination of flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test.)
NF T60-139-1970 石油产品.润滑脂的表视粘度 (INDUSTRIAL OILS AND GREASES. APPARENT VISCOSITY OF LUBRICATING GREASE.)
NF T60-140-1974 石油产品.用四分之一或二分之一标度锥测定润滑脂的针入度 (CONE PENETRATION OF LUBRICATION GREASE USING ONE-QUARTER OR ONE-HALF SCALE CONE EQUIPMENT.)
NF T60-141-1993 工业液体润滑剂.ISO粘度分类 (Industrial liquid lubricants. ISO viscosity classification.)
NF T60-142-1994 石油产品和烃类.硫含量的测定.威克波耳德(Wickbold)燃烧法 (Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold combustion method.)
NF T60-144-1974 石油产品.润滑脂中硫灰分的测定 (DETERMINATION OF SULFATED ASH FROM GREASES.)
NF T60-147-2003 石油产品.石蜡产品软化点的测定.环法和球法 (Petroleum products - Determination of softening point of paraffin products - Ring and ball method.)
NF T60-148-1976 石油产品.液态石油产品的粘度一温度图表 (VISCOSITY-TEMPERATURE CHARTS FOR LIQUID PETROLEUM PRODUCTS.)
NF T60-148-2003 液态石油产品.按照温度测定运动粘度 (Liquid petroleum products - Determination of the kinematic viscosity according to the temperature.)
NF T60-149-1999 石油和相关产品.蒸汽透平油和其他油品空气释放特性的测定.撞击法 (Petroleum and related products - Determination of air-release properties of steam turbine and other oils - Impinger method.)
NF T60-150-1979 石油产品.加抗氧化剂涡轮机油的氧化稳定性 (PETROLEUM PRODUCTS. OXIDATION STABILITY OF INHIBITED TURBINE OILS.)
NF T60-151-1979 石油产品.有水时涡轮机油防锈特性的评定 (PETROLEUM PRODUCTS. ASSESSMENT OF RUST-PREVENTING CHARACTERISTICS OF TURBINE OIL IN THE PRESENCE OF WATER.)
NF T60-152-1979 石油产品.用BROOKFIELD粘度计测定低温粘度.液浴法 (PETROLEUM PRODUCTS. MEASUREMENT OF THE VISCOSITY AT LOW TEMPERATURES USING A BROOKFIELD VISCOSITY METER. LIQUID BATH METHOD.)
NF T60-153-1979 石油产品.石蜡混合物浊点的测定 (PETROLEUM PRODUCTS. DETERMINATION OF THE CLOUD POINT OF PARAFFIN)
NF T60-154-2001 石油产品.水分测定.卡尔. 费休滴定法 (Petroleum products - Determination of water - Potentiometric Karl Fischer titration method.)
NF T60-155-1984 石油产品.橡胶庥业用石油增塑剂烃类的测定.粘土和硅胶吸收色谱法 (PETROLEUM PRODUCTS. DETERMINATION OF HYDROCARBON GROUPS IN PETROLEUM PLASTICIZERS USED IN THE RUBBER INDUSTRY. CLAY-SILICA GEL ADSORPTION CHROMATOGRAPHIC METHOD.)
NF T60-156-1982 石油产品.不加抗氧剂的新涡轮机油的抗乳化指数.水蒸气试验 (PETROLEUM PRODUCTS. DESEMULSIFICATION NUMBER OF NEW NON INHIBITED TURBINE OILS. WATER VAPOUR TEST.)
NF T60-157-1982 石油产品.润滑油中不溶物质的含量 (PETROLEUM PRODUCTS. INSOLUBLES CONTENT OF LUBRICATING OILS.)
NF T60-158-1982 无添加剂纯石蜡气味的测定 (DETERMINATION OF THE ODOUR OF PURE PARAFFINS FREE FROM ADDITIVES.)
NF T60-159-1994 暂时防蚀产品.用浸渍法测定脱脂性能 (TEMPORARY ANTICORROSION PRODUCTS. DEGREASING ABILITY BY DIPPING.)
NF T60-162-1985 润滑剂、工油和类似产品(L类).分类.O部分: 综合 (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 0 : GENERAL.)
NF T60-163-1985 润滑剂.工业油和类似产品(L类).分类.第1部分: A类(润滑损耗) (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 1 : FAMILY A (TOTAL LOSS SYSTEM).)
NF T60-164-1985 润滑剂、工业油和类似产品(L类).分类.第2部分: F类(主轴轴承.轴承和亮合离合器 (LUBRICANTS,INDUSTRIAL OIL (SPINDLE BEARINGS AND ASSOCIATED CLUTCHES).)
NF T60-165-1994 暂时防蚀产品.指纹抵消特性 (TEMPORARY PROTECTION AGAINST CORROSION. FINGER PRINT NEUTRALIZATION PROPERTIES.)
NF T60-166-1994 暂时防蚀产品.防腐产品特性评定用金属探测器的制备方法 (TEMPORARY PROTECTION AGAINST CORROSION. METHOD OF PREPARE METALLIC PROBES FOR THE EVALUATION OF THE PROPERTIES OF PRESERVATIVE PRODUCTS.)
NF T60-167-1994 暂时防蚀产品.储藏稳定性(循环条件下) (TEMPORARY PROTECTION AGAINST CORROSION. STORAGE STABILITY (CYCLIC CONDITIONS).)
NF T60-168-1994 暂时防蚀产品.防蚀性和排水量的特点 (TEMPORARY ANTICORROSION PRODUCTS. ANTICORROSION AND WATER DISPLACEMENT CHARACTERISTICS.)
NF T60-170-1994 暂时防蚀产品.用浸渍法对覆盖能力的评定 (TEMPORARY ANTICORROSION PRODUCTS. ASSESSMENT OF THE COVERING CAPACITY BY DIPPING.)
NF T60-171-1986 石油产品.低温下润滑脂锥面的锥入渗透度 (PETROLEUM PRODUCTS. DETERMINATION OF CONE PENETRATION OF GREASES UNDER LOW TEMPERATURE.)
NF T60-172-1996 原油和石油产品.密度测定.振荡U形管法 (Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method.)
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183] [184] [185] [186] [187] [188] [189] [190] [191] [192] [193] [194] [195] [196] [197]