目录 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN
NF——法国标准化协会目录
编号 中文名称 英文名称
NF T54-019-1995 塑料管道和导管系统.未增塑聚氯乙烯(PVC-U)管和配件.粘度值的测定和K值的计算的样品制备 (PLASTICS PIPING AND DUCTING SYSTEMS. PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U). SPECIMEN PREPARATION FOR DETERMINATION OF THE VISCOSITY NUMBER AND CALCULATION OF THE K-VALUE. (EUROPEAN STANDARD EN 922).)
NF T54-020-1995 塑料.未增塑聚氯乙烯管.冷却扩孔试验 (Plastics. Pipes made of light weight unplasticized polyvinyl chloride. Cold flaring test.)
NF T54-024-1994 塑料管道系统.热塑塑料管和配件.维卡软化点的测定 (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES AND FITTINGS. DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST). (EUROPEAN STANDARD EN 727).)
NF T54-025-1995 塑料管道系统.热塑塑料管.恒定低温度下耐内压性能的测定 (Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature.)
NF T54-029-1981 塑料.未增塑聚氯乙烯模制接头.压力系列.规范 (Plastics. Moulded unplasticized PVC fittings. Pressure series. Specifications.)
NF T54-036-1994 塑料管道和导管系统.注模热塑配件.热效应目视评定的试验方法 (Plastics piping and ducting systems. Injection-moulded thermoplastics fitting. Test method for visually assessing effects of heating.)
NF T54-037-1981 塑料.未增塑聚氯乙烯管道件.生活污水无压排放设备用密封圈接头.使 用特性 (Plastics. Un-plasticized PVC parts dor piping. Simple assemblies with sealing rings for domestic water drainage piping. End use test. Specification.)
NF T54-038-1981 装配有压力管用密封圈的未增塑聚氯乙烯管和接头.尺寸特性 (Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Dimensional caracteristics.)
NF T54-039-1988 塑料.未增塑聚氯乙烯压力管用密封圈的固定接头.使用特性.规范 (Plastics. Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Fitness for use.)
NF T54-040-1977 塑料.未增塑聚氯乙烯模制配件.尺寸 (PLASTICS.MOULDED UN-PLASTICIZED FITTINGS.DIMENSIONS.)
NF T54-041-1994 塑料管道系统.压力管道用弹性密封圈型接头的热注塑料配件.耐无轴向力短暂内压力性能的试验方法 (Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust.)
NF T54-042-1994 塑料管道系统.压力管道用溶剂-水泥胶合接头的注模承窝配件 (Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure.)
NF T54-044-1978 塑料.聚乙烯管与接头.按标定密度和热融流动指数命名的聚乙烯的名称 (POLYETHYLENE (PE) PIPES AND FITTINGS. DESIGNATION OF POLYETHYLENE BASED ON NOMINAL DENSITY AND MELT FLOW INDEX.)
NF T54-045-1994 塑料管道和导管系统.压力管道系统用热注塑料配件.最大变形的挤撞试验法 (Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing.)
NF T54-046-1978 低密度聚乙烯(PE-BD)管与配件.流体输送管的化学稳定性 (LOW DENSITY POLYETHYLENE (PE-BD) PIPES AND FITTINGS. CHEMICAL RESISTANCE WITH RESPECT TO FLUIDS TO BE CONVEYED.)
NF T54-048-1977 塑料.低密度聚乙烯管.物理试验用试样的制备 (PLASTICS. LOW DENSITY POLYETHYLENE PIPES. PREPARATION OF SPECIMENS FOR PHYSICAL TESTING.)
NF T54-049-1977 塑料.聚乙烯管.管状聚乙烯基准密度的计算 (EVALUATION OF THE REFERENCE DENSITY OF POLYETHYLENE IN FORM OF A PIPES.)
NF T54-050-1977 塑料.聚乙烯管.粒状聚乙烯基准密度的计算 (EVALUATION OF THE REFERENCE DENSITY OF POLYETHYLENE IN FORM OF GRANULATES.)
NF T54-051-1979 聚乙烯管道.机械接头的载荷减小.试验方法与规 (Polyethylene pipes. Pressure drop in mechanical pipe-jointing systems. Method of test and requirements.)
NF T54-052-2001 人类饮用水输送用塑料管道系统.迁移评定.塑料管和配件及其接头迁移值的测定 (Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints.)
NF T54-054-1997 塑料管道系统.未增塑聚氯乙烯端点负载轴承双插座连接件.当弯曲和受到内压时测定其防漏性和强度的试验方法 (Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure.)
NF T54-059-1995 压力管道和配件用热塑性塑料.分类和名称与符号.总体设备的设计系数 (Thermoplastics materials for pipes and fittings for pressure applications. Classification and designation. Overall service (design) coefficient.)
NF T54-061-1978 聚丙烯(PP)管和配件.流体输送管的化学稳定性 (POLYPROPYLENE (PP) PIPES AND FITTINGS. CHEMICAL RESISTANCE WITH RESPECT TO FLUIDS TO BE CONVEYED.)
NF T54-062-1-1999 建筑物内污物和污水排放(低、高温)用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统规范 (Plastics piping systems for soils and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.)
NF T54-063-1-2003 供水用塑料管道系统.聚乙烯.第1部分:总则 (Plastics piping systems for water supply - Polyethylene (PE) - Part 1 : general.)
NF T54-063-1989 塑料.自来水网用的聚乙烯管子.规范和试验方法 (PLASTICS. POLYETHYLENE PIPES FOR DRINKING WATER SUPPLY NETWORKS. SPECIFICATIONS AND TEST METHODS.)
NF T54-063-2-2003 供水用塑料管道系统.聚乙烯.第2部分:管道 (Plastics piping systems for water supply - Polyethylene (PE) - Part 2 : pipes.)
NF T54-063-3-2003 供水用塑料管道系统.聚乙烯.第3部分:配件 (Plastics piping systems for water supply - Polyethylene (PE) - Part 3 : fittings.)
NF T54-063-4-2003 供水用塑料管道系统.聚乙烯(PE).第4部分:阀 (Plastics piping systems for water supply - Polyethylene (PE) - Part 4 : valves.)
NF T54-063-5-2003 供水用塑料管道系统.聚乙烯.第5部分:系统适用性 (Plastics piping systems for water supply - Polyethylene (PE) - Part 5 : fitness for purpose of the system.)
NF T54-064-1990 塑料.带紧箍的半离合器系统(吉可曼系统).公称压力PN6 (PLASTICS-HALF SYMMETRIC FITTING (GUILLEMIN SYSTEM) WITH LOCKING RING. NOMINAL PRESSURE PN 6.)
NF T54-065-1-2003 气体燃料的塑料管道供应系统.聚乙烯(PE).第1部分:总则 (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1 : general.)
NF T54-065-2-2003 气体燃料的塑料管道供应系统.聚乙烯(PE).第2部分:管道 (Plastics piping systems for the supply of gaseous fuels - Polythylene (PE) - Part 2 : pipes.)
NF T54-065-3-2003 气体燃料的塑料管道供应系统.聚乙烯(PE).第3部分:配件 (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3 : fittings.)
NF T54-065-4-2003 气体燃料的塑料管道供应系统.聚乙烯(PE).第4部分:阀门 (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4 : valves.)
NF T54-065-5-2003 气体燃料的塑料管道供应系统.聚乙烯(PE).第5部分:系统的配合 (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5 : fitness for purpose of the system.)
NF T54-070-1978 高密度聚乙烯(PE-HD)管和配件.流体输送管的化学稳定性 (High density polyethelene (pe-hd) pipes and fittings. Chemical resistance with respect to fluids to be conveyed.)
NF T54-072-1981 塑料.“5”聚乙烯管.规范 (POLYETHYLENE PIPES “5“. SPECIFICATIONS.)
NF T54-075-1997 塑料管和管道系统.聚烯烃管和配件.氧化时间的测定(欧洲标准EN 728) (Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time.)
NF T54-076-1992 塑料.聚乙烯塑料管道系统.标称外径125以上导管的耐缓慢龟裂性.试验方法 (Plastics. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter over 125. Test method.)
NF T54-077-1992 塑料.聚乙烯塑料管道系统.标称外径125及其以下导管的耐缓慢龟裂性.试验方法 (Plastic. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter up to 125. Test method.)
NF T54-078-1992 塑料.塑料管道系统用聚乙烯.极限应力强度因数的测定.试验方法 (Plastics. Polyethylene (pe) for plastics piping systems. Determination of the limiting stress intensity factor. Test method.)
NF T54-080-2002 具有视觉特性的地下电缆和管线用塑料报警装置 (Plastics warning devices for underground cables and pipelines with visual characteristics.)
NF T54-081-1987 塑料.饮用水供给用未增塑聚氯乙烯管(PVC-U).作为杂质的镉和汞的可萃取性 (Plastics. Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply. Extractability of cadmium and mercury occurring as impurities.)
NF T54-082-1988 塑料.热固塑料阀.耐压和密封性试验 (PLASTICS. THERMOPLASTIC AND THERMOSETTING VALVES. TEST OF RESISTANCE TO PRESSURE.)
NF T54-083-1991 热塑料制阀门.转矩.试验方法.(欧洲标准EN 28233) (THERMOPLASTICS VALVES. TORQUE. TEST METHOD. (EUROPEAN STANDARD EN 28233).)
NF T54-084-1991 热塑料制阀门.耐疲劳强度.试验方法.(欧洲标准EN 28659) (THERMOPLASTICS VALVES. FATIGUE STRENGTH. TEST METHOD. (EUROPEAN STANDARD EN 28659).)
NF T54-085-1988 塑料.液体压力管用网状线聚乙烯管.规范 (Plastics. Reticulate polyethylene pipes for pipelines under pressure. Specifications.)
NF T54-086-1990 塑料.地下灌溉用未增塑聚氯乙烯管.规格 (PLASTICS. UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC-U) FOR UNDERGROUND IRRIGATION. SPECIFICATIONS.)
NF T54-087-1993 塑料管道系统.交联聚乙烯(PE-X)管.溶剂萃取法测定交联度 (PLASTICS PIPING SYSTEMS. CROSSLINKED POLYETHYLENE (PE-X) PIPES. DETERMINATION OF DEGREE OF CROSSLINKING BY SOLVENT EXTRACTION. (EUROPEAN STANDARD EN 579).)
NF T54-090-1976 塑料.未增塑聚氯乙烯和氯化聚氯乙烯管件.管和接头颜色 (PLASTICS. UNPLASTICIZED AND CHLORINATED PVC PIPES. COLOUR OF PIPES AND FITTINGS.)
NF T54-095-1985 塑料.未增塑聚氯乙烯管件接头粘合溶剂.使用特性 (Adhesive with solvents for assembly of unplasticized PVC pipe elements. Characterization. Basic test methods.)
NF T54-096-1985 塑料.未增塑聚氯乙烯管件装配用溶剂胶粘剂.适用性 (ADHESIVES WITH SOLVENTS FOR ASSEMBLY OF UNPLASTICIZED PVC PIPE ELEMENTS. SUITABILITY FOR USE.)
NF T54-097-1995 塑料管道系统.热塑管.耐连续吹风的试验方法 (Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the-clock method.)
NF T54-099-1987 承压工业用热塑料管.耐化学因素和基本约束因素的测定.第1部分:聚烯烃管 (THERMOPLASTICS PIPES FOR INDUSTRIAL APPLICATIONS UNDER PRESSURE. DETERMINATION OF THE CHEMICAL RESISTANCE FACTOR AND OF THE BASIC STRESS. PART 1 : POLYOLEFIN PIPES.)
NF T54-100-1997 塑料管道系统.热塑阀门.外部送风后阀门完好性的测试方法 (Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow.)
NF T54-101-1974 塑料.塑料板.外现和尺寸.检验方法 (PLASTIC SHEET. PRESENTATION AND DIMENSIONS. METHODS OF CONTROL.)
NF T54-103-1996 塑料.聚甲基丙烯酸甲酯双合板和三合板.试验方法 (PLASTICS. POLY(METHYL METHACRYLATE) DOUBLE- AND TRIPLE-SKIN SHEETS. TEST METHODS. (EUROPEAN STANDARD EN ISO 12017).)
NF T54-104-1970 塑料.塑料膜.柔软性的评定.吊环法 (PLASTICS. SHEETS. ESTIMATE OF FLEXIBILITY. SUSPENDED LOOP METHOD.)
NF T54-105-1973 塑料.塑料膜.受热后尺寸变化的测定.KAOLIN床法 (PLASTICS SHEETS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER HEATING. KAOLIN BED METHOD.)
NF T54-106-1980 塑料.薄膜.粘接的评定.剥离法 (Plastics. Sheets. Evaluation of the tendency to cohere. Peeling method.)
NF T54-107-1971 塑料.薄膜.抗撕断强度的测定(非多孔试验件) (PLASTICS. THIN SHEETS. DETERMINATION OF TEAR RESISTANCE (NON PERFORATED TEST PIECE).)
NF T54-108-1971 塑料.薄膜.抗撕断扩张强度的测定 (PLASTICS. THIN SHEETS. DETERMINATION OF RESISTANCE TO TEAR PROPAGATION.)
NF T54-109-1973 塑料.薄膜.自由击锤锥子法测定抗冲击强度.DART试验法 (PLASTICS. SHEETS. IMPACT RESISTANCE BY THE FREE FALLING DART METHOD.)
NF T54-110-1971 塑料.薄膜.不脆化常规极限温度测定.(扣环冲击) (PLASTICS. THIN SHEETS. DETERMINATION OF PLIABILITY LIMIT TEMPERATURE.(LOOPED TEST PIECE IMPACT TEST).)
NF T54-111-1971 塑料.聚乙烯透明塑料薄膜.通过对光线的扩散和传播计算测定混浊度 (TRANSPARENT SHEETS OF POLYETHYLENE. DETERMINATION OF THE HAZE.)
NF T54-112-1980 塑料.薄膜.滑动性的测定.摩擦系数的测定 (Plastics. Sheets. Determination of the slippage. Measuring the friction coefficients.)
NF T54-113-1971 塑料.薄膜.薄膜平展性的检验 (PLASTICS MATERIALS. THIN SHEET. INSPECTION OF THE EVENNESS.)
NF T54-115-1973 塑料.薄膜.受热后尺寸变化的测定.浸泡法 (PLASTIC SHEETS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER HEATING. IMMERSION METHOD.)
NF T54-116-1973 塑料.薄膜.抗穿孔强度的测定.穿孔法 (PLASTIC. SHEETS. DETERMINATION OF RESISTANCE TO PERFORATION. PERFORAMETRE METHOD.)
NF T54-118-2001 塑料.在大气压力下薄膜和薄板的透气率的测定.测压法 (Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method.)
NF T54-119-1976 塑料.增塑聚氯乙烯塑料薄膜.高频焊接试验常规方法 (PLASTICS.PLASTICIZED PVC SHEETS. CONVENTIONAL TEST METHOD FOR HIGH FREQUENCY WELDING.)
NF T54-120-1976 塑料.薄膜.热焊接试验常规方法(热棒法) (PLASTICS. SHEETS. ASSESSMENT OF SUITABILITY FOR THERMAL WELDING. (HOT BAR METHOD.))
NF T54-121-1976 塑料.聚乙烯薄膜.化学试剂和恒定拉力作用下焊缝抗裂强度 (PLASTICS. THIN POLYETHYLENE SHEETS. RESISTANCE TO SPLITTING OF WELDS UNDER TENSILE STRESS IN THE PRESENCE OF CHEMICAL AGENTS.)
NF T54-122-1976 塑料.薄膜.张力试验评定焊缝和或粘合质量 (PLASTICS. SHEETS. ASSESSMENT OF THE QUALITY OF A WELD OR BOND BETWEEN TWO SHEET ELEMENTS BY MEANS OF A TENSILE TEST.)
NF T54-123-1987 塑料.塑料薄膜.抗破裂强度的测定 (Plastics. Sheets. Determination of bursting strength.)
NF T54-124-1980 塑料薄膜和塑料片.印花特性 (PLASTICS SHEETS AND FILMS. IMPRESSIBILITY.)
NF T54-125-1993 塑料.聚乙烯,乙烯共聚物及其混合物制热缩性薄膜.收缩应力的测定.试验方法 (PLASTICS. HEATSHRINKABLE FILMS IN POLYETHYLENE, ETHYLEN COPOLYMERS AND THEIR MIXTURES. DETERMINATION OF THE SHRINKING AND CONTRACTION STRESSES. TEST METHOD.)
NF T54-140-1984 塑料.塑料片和塑料薄膜.抗撕裂强度的测定.第1部分:PANTALON撕裂法 (PLASTICS. FILM AND SHEETING. DETERMINATION OF TEAR RESISTANCE. PART 1 : TROUSER TEAR METHOD.)
NF T54-141-1984 塑料.塑料片和塑料薄膜.抗撕裂强度的测定.第2部分:ELMENDORF法 (PLASTICS. FILM AND SHEETING. DETERMINATION OF TEAR RESISTANCE. PART 2 : ELMENDORF METHOD.)
NF T54-150-1971 塑料.薄膜.卷轴内径 (PLASTICS MATERIALS. SHEET. WINDING MANDRELS. INTERNAL DIAMETERS.)
NF T54-190-2002 农业和园艺上使用的覆盖热塑薄膜 (Covering thermoplastic films for use in agriculture and horticulture.)
NF T54-191-1994 塑料.农业用薄膜.缠结标记用可延伸薄膜.使用可膨胀性的测定 (PLASTICS. FILMS FOR AGRICULTURAL USE. EXTENSIBLE THIN FILMS FOR TAPING AND SILAGE MAKING. DETERMINATION OF SWEETABILITY FOR USE.)
NF T54-192-2003 塑料.农业和园艺用塑料膜.安装和使用条件 (Plastics - Plastics films for agriculture and horticulture - Conditions for installation and use.)
NF T54-195-2000 塑料.农业土壤消毒用薄膜.溴代甲烷隔膜规范和试验方法 (Plastics - Films for agricultural soil desinfection - Specification for methyl bromide barrier films and test methods.)
NF T54-196-1-1997 塑料.可伸展薄膜.第1部分:可伸展薄膜特性测定的常规方法 (PLASTICS. STRETCHABLE FILMS. PART 1 : CONVENTIONAL METHOD FOR DETERMINING THE PROPERTIES OF STRETCHABLE FILMS.)
NF T54-196-2-1998 塑料.可伸展薄膜.第2部分:螺旋箍装箱用可伸展薄膜适合性测定 (PLASTICS. STRETCHABLE FILMS. PART 2 : DETERMINATION OF THE SUITABILITY FOR USE OF STRETCHABLE FILMS FOR HELICOID HOOP CASING.)
NF T54-202-2002 青储饲料热塑膜 (Silage thermoplastic films.)
NF T54-300-1-2003 普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第1部分:总则 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1 : general.)
NF T54-300-2-2003 普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第2部分:管道 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2 : pipes.)
NF T54-300-3-2003 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第3部分:管件 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3 : fittings.)
NF T54-300-4-2003 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第4部分:阀门 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4 : valves.)
NF T54-300-5-2003 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第5部分:系统的适用性 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5 : fitness for purpose of the system.)
NF T54-301-1-1991 饰面用高压层压板(HPL).热固性树脂板.第1部分:规格(欧洲标准 EN 438-1) (DECORATIVE HIGH-PRESSURE LAMINATES (HPL). SHEETS BASED ON THERMOSETTING RESINS. PART 1 : SPECIFICATIONS. (EUROPEAN STANDARD EN 438-1).)
NF T54-301-2-1991 饰面用高压层压板(HPL).热固性树脂板.第2部分:特性测定.(欧洲标准 EN 438-2) (DECORATIVE HIGH-PRESSURE LAMINATES (HPL). SHEETS BASED ON THERMOSETTING RESINS. PART 2 : DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN 438-2).)
NF T54-320-1979 饰面用层压板.高压饰面用层压板的加工指南(按照T54-301“S”型) (DECORATIVE LAMINATED SHEET. GUIDE TO THE PROCESSING OF HIGH PRESSURE DECORATIVE LAMINATED SHEETS. (TYPE “S“ T 54-301).)
NF T54-401-1-2003 塑料.聚甲基丙烯酸甲酯薄板材.类型、尺寸和特性.第1部分:浇注薄板材 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1 : cast sheets.)
NF T54-401-2-1997 塑料.聚(甲基丙-烯酸甲酯)塑料薄片.类型,尺寸和性能.第2部分:熔压挤出薄片(EN ISO 7823-2) (Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Part 2 : melt-calendered extruded sheets.)
NF T54-401-2-2003 塑料.聚甲基丙烯酸甲酯薄板材.类型、尺寸和特性.第2部分:挤制薄板材 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2 : extruded sheets.)
NF T54-402-1995 塑料.聚碳酸酯薄板材.类型、尺寸和特性 (PLASTICS. POLYCARBONATE SHEETS. TYPES, DIMENSIONS AND CHARACTERISTICS. (EUROPEAN STANDARD EN ISO 11963).)
NF T54-404-1999 聚乙烯(PE-HD)的挤压片材.要求和试验方法 (EXTRUDED SHEETS OF POLYETHYLENE (PE-HD). REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN ISO 14632).)
NF T54-405-1-2002 外部用的未增塑的聚氯乙烯挤压或合成挤压产品.规范和试验方法.第1部分:固体墙聚氯乙烯板材 (Unplasticized poly(vinyl chloride) (PVC-U) extruded or coextruded profiles for outside use - Specifications and test methods - Part 1 : solid wall PVC-U.)
NF T54-406-1996 塑料.园艺温室用单个或复合墙板.联合规范和特殊特点.评估方法 (PLASTICS. SINGLE OR MULTIPLE WALL RIGID SHEETS FOR HORTICULTURAL GREENHOUSES. JOINT SPECIFICATIONS AND SPECIAL CHARACTERISTICS. ASSESSMENT METHODS.)
NF T54-407-1999 聚丙烯挤压片材(PP).要求和试验方法 (EXTRUDED SHEETS OF POLYPROPYLENE (PP). REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN ISO 15013).)
NF T54-408-1999 冲击改良的聚苯乙烯(PS-I)的挤压片.要求和试验方法 (EXTRUDED SHEETS OF IMPACT-MODIFIED POLYSTYRENE (PS-I). REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN ISO 14631).)
NF T54-412-2000 焊接热塑结构的特性值.热塑性设备设计用允许应力和模数的测定 (Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment.)
NF T54-422-2003 塑料.农业和园艺用热塑性塑料薄膜覆盖物 (Plastics - Mulching thermoplastic films for use in agriculture and horticulture.)
NF T54-503-1976 塑料.轻塑料制品.拉力性能的测定 (LIGHT PLASTICS PRODUCTS. DETERMINATION OF TENSILE PROPERTIES.)
NF T54-504-1976 塑料.轻塑料制品.弯曲试验 (LIGHT PLASTICS PRODUCTS. BENDING TEST.)
NF T54-505-1976 塑料.轻塑料制品.抗冲击强度试验 (LIGHT PLASTICS PRODUCTS. IMPACT RESISTANCE TEST.)
NF T54-601-1987 塑料夹层结构定义.机械特性的测定 (Plastics based sandwich structures. Determination of mechanical properties. Definitions.)
NF T54-602-1983 塑料夹层结构.垂直挤压试验 (PLASTICS BASED SANDWICH STRUCTURES. PERPENDICULAR COMPRESSION TEST.)
NF T54-603-1983 塑料夹层结构.垂直拉力试验 (PLASTICS BASED SANDWICH STRUCTURES. PERPENDICULAR TENSILE TEST.)
NF T54-604-1986 塑料夹层结构.火焰弯曲或无火焰弯曲纵向挤压试验 (Plastics based sandwich structures. Longitudinal compression test without or with buckling.)
NF T54-605-1983 塑料夹层结构.抗剪强度的测定 (PLASTICS BASED SANDWICH STRUCTURES. DETERMINATION OF SHEAR STRENGTH.)
NF T54-606-1987 塑料夹层结构.弯曲试验 (Plastics based sandwich structures. Bend test.)
NF T54-701-1988 塑料.热固树脂基层压板.规范 (PLASTICS. INDUSTRIAL LAMINATED SHEETS BASED ON THERMOSETTING RESINS. SPECIFICATION.)
NF T54-801-1992 塑料.自助餐厅托盘.规范和试验方法 (PLASTICS. TRAYS FOR SELF-SERVICE RESTAURANTS. SSPECIFICATION AND TEST METHODS.)
NF T54-803-1-1994 塑料.游泳池用增塑聚氯乙烯薄膜.规范和试验方法.第1部分:普通薄膜 (PLASTICS. PLASTICIZED POLYVINYL CHLORIDE MEMBRANES FOR SWIMMING-POOLS. SPECIFICATIONS AND TEST METHODS. PART 1 : SIMPLE MEMBRANES.)
NF T54-803-2-1994 塑料.游泳池用增塑聚氯乙烯薄膜.规范和试验方法.第2部分:增强薄膜 (PLASTICS. PLASTICIZED POLYVINYL CHLORIDE MEMBRANES FOR SWIMMING-POOLS. SPECIFICATIONS AND TEST METHODS. PART 2 : REINFORCED MEMBRANES.)
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183] [184] [185] [186] [187] [188] [189] [190] [191] [192] [193] [194] [195] [196] [197]