目录 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN
NF——法国标准化协会目录
编号 中文名称 英文名称
NF T51-352-1999 塑料.未增塑的醋酸纤维素.游离酸度的测定 (PLASTICS. UNPLASTICIZED CELLULOSE ACETATE. DETERMINATION OF FREE ACIDITY. (EUROPEAN STANDARD EN ISO 1061).)
NF T51-356-1999 塑料.非增塑的醋酸纤维素.水分含量的测定 (PLASTICS. UNPLASTICIZED CELLULOSE ACETATE. DETERMINATION OF MOISTURE CONTENT. (EUROPEAN STANDARD EN ISO 585).)
NF T51-357-1999 塑料.醋酸纤维素.模塑时粘度降低的测定 (PLASTICS. CELLULOSE ACETATE. DETERMINATION OF VISCOSITY LOSS ON MOULDING. (EUROPEAN STANDARD EN ISO 1599).)
NF T51-358-1999 塑料.醋酸纤维素.利用加热的不同时期在模制样品生产时光吸收量的测定 (PLASTICS. CELLULOSE ACETATE. DETERMINATION OF LIGHT ABSORPTION ON MOULDED SPECIMENS PRODUCED USING DIFFERENT PERIODS OF HEATING. (EUROPEAN STANDARD EN ISO 1600).)
NF T51-400-2000 热塑性塑料用填充材料.范围、名称与符号、要求和试验 (Filler materials for thermoplastics - Scope, designation, requirements, tests.)
NF T51-401-1981 塑料.热固性模制材料.收缩和后收缩的测定 (PLASTICS. THERMOSETTING MOULDING MATERIALS. DETERMINATION OF SHRINKAGE AND POST-SHRINKAGE.)
NF T51-402-1998 塑料.热固注模材料.传输流量的测定(欧洲标准 EN ISO 7808) (Plastics. Thermosetting moulding materials. Determination of transfer flow.)
NF T51-403-1998 塑料.酚醛树脂.差示扫描量热法测定反应热和温度 (PLASTICS. PHENOLIC RESINS. DETERMINATION OF HEATS AND TEMPERATURES OF REACTION BY DIFFERENTIAL SCANNING CALORIMETRY. (EUROPEAN STANDARD EN ISO 11409).)
NF T51-404-1998 塑料.酚醛树脂.通过液相色谱法的分离 (PLASTICS. PHENOLIC RESINS. SEPARATION BY LIQUID CHROMATOGRAPHY. (EUROPEAN STANDARD EN ISO 11401).)
NF T51-405-1998 塑料.缩合树脂.游离甲醛的测定 (PLASTICS. CONDENSATION RESINS. DETERMINATION OF FREE FORMALDEHYDE. (EUROPEAN STANDARD EN ISO 11402).)
NF T51-406-1999 塑料.热固注模材料.提高温度下短期性能的评估(EN ISO11248) (Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures.)
NF T51-421-1998 塑料.酚醛树脂粉.在加热玻璃板上流动距离的测定 (Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate.)
NF T51-422-1995 塑料.酚醛树脂粉.用空气喷射的筛滤器械的筛分析 (Plastics. Phenolic resin powder. Sieve analysis using air-jet sieve apparatus.)
NF T51-423-1998 塑料.液体酚醛树脂.水溶混性的测定 (Plastics. Liquid phenolic resins. Determination of water miscibility.)
NF T51-425-1983 塑料.固态和液态酚树脂.密度的测定 (PLASTICS. LIQUID AND SOLID PHENOLIC RESINS. MEASUREMENT OF DENSITY.)
NF T51-426-1995 塑料.液态酚醛树脂或酚醛树脂溶液粘度的测定 (Plastics. Phenolic resins in the liquid state of in solution. Determination of viscosity.)
NF T51-428-1998 塑料.酚醛树脂.B-变化测试板上反应性能的测定 (Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate.)
NF T51-429-2001 塑料.酚醛树脂.用自动设备测定特殊条件下的胶凝时间 (Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus.)
NF T51-430-1983 塑料.酚树脂.水含量测定.卡尔·费休法 (PLASTICS. PHENOLIC RESINS. DETERMINATION OF WATER CONTENT. KARL FISCHER METHOD.)
NF T51-431-1997 塑料.酚醛树脂.六亚甲基四胺含量的测定.基氏定氮法和高氯酸法(欧洲标准EN ISO 8988) (Plastics. Phenolic resins. Determination of hexamethylenetetramine content. Kjeldahl method and perchloric acid method.)
NF T51-432-1984 塑料.酚树脂.过氯酸法测定HMTA含量 (PLASTICS. PHENOLIC RESINS. DETERMINATION OF HMTA CONTENT BY PERCHLORIC ACID METHOD.)
NF T51-434-1997 塑料.酚醛树脂.游离甲醛含量的测定盐酸胲法(欧洲标准EN ISO 9397) (Plastics. Phenolic resins. Determination of free-formaldehyde content. Hydroxylamine hydrochloride method.)
NF T51-435-1985 塑料.固态酚树脂.毛细管法测定熔化范围 (PLASTICS. SOLID PHENOLIC RESINS. DETERMINATION OF MELTING RANGE BY THE CAPILLARY TUBE METHOD.)
NF T51-436-2002 塑料.酚醛树脂.用气体色谱法测定残余酚的含量 (Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography.)
NF T51-437-1985 塑料.固态酚树脂.软化点的测定.珠环法 (PLASTICS. SOLID PHENOLIC RESINS. DETERMINATION OF SOFTENING POINT. “BALL AND RING“ METHOD.)
NF T51-438-1998 塑料.液态酚醛树脂.非挥发性物质的常规测定 (Plastics. Liquid phenolic resins. Conventional determination of non-volatile matter.)
NF T51-440-2000 塑料.酚醛树脂.分类和试验方法 (Plastics - Phenolic resins - Classification and test methods.)
NF T51-441-1997 塑料.酚醛树脂.测定可溶酚醛树脂在酸性条件下的反应性(欧洲标准EN ISO 9771) (PLASTICS. PHENOLIC RESINS. DETERMINATION OF THE PSEUDO-ADIABATIC TEMPERATURE RISE OF LIQUID RESOLS WHEN CURED UNDER ACID CONDITIONS. (EUROPEAN STANDARD EN ISO 9771).)
NF T51-442-1995 塑料.酚醛树脂.树脂萃取物电导率的测定 (PLASTICS. PHENOLIC RESINS. DETERMINATION OF ELECTRICAL CONDUCTIVITY OF RESIN EXTRACTS. (EUROPEAN STANDARD EN ISO 9944).)
NF T51-501-1999 塑料.不饱和聚酯树脂和环氧树脂.体积总收缩率的测定 (Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage.)
NF T51-510-1-2002 塑料.不饱和聚酯树脂(UP-R).第1部分:名称与符号系统 (Plastics - Unsaturated-polyester resins (UP-R) - Part 1 : designation system.)
NF T51-510-2-2002 塑料.不饱和聚酯树脂(UP-R).第2部分:试样的制备和性能的测定 (Plastics - Unsaturated-polyester resins (UP-R) - Part 2 : preparation of test specimens and determination of properties.)
NF T51-511-2000 塑料(聚脂树脂)、涂料和清漆(粘合剂).部分酸值和全部酸值的测定 (Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value.)
NF T51-512-2003 塑料.不饱和聚酯树脂.室温条件下胶凝时间的测量 (Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature.)
NF T51-513-1998 塑料.不饱和聚酯树脂.羟基值的测定 (Plastics. Unsaturated polyester resins. Determination of hydroxyl value.)
NF T51-515-1979 塑料.不饱和非聚合聚酯树脂.挥发物测定 (PLASTICS. UNSATURATED UNPOLYMERIZED POLYESTERS RESINS. DETERMINATION OF VOLATILE MATTER.)
NF T51-519-1999 塑料.不饱和聚酯和环氧树脂.氯总含量的测定 (PLASTICS. UNSATURATED POLYESTERS AND EPOXIDE RESINS. DETERMINATION OF TOTAL CHLORINE CONTENT. (EUROPEAN STANDARD EN ISO 4615).)
NF T51-520-1978 塑料.环氧树脂.名称 (EPOXY RESINS. DESIGNATION.)
NF T51-523-1976 塑料.环氧树脂和缩水甘油酸酯.无机氯的测定.直接滴定法 (PLASTICS. EPOXY RESINS AND GLYCIDIC ESTERS. DETERMINATION OF INORGANIC CHLORINE. DIRECT TITRATION METHOD.)
NF T51-524-1998 塑料.环氧树脂和相关材料.易皂化氯的测定 (Plastics. Epoxy resins and related materials. Determination of easily saponifiable chlorine.)
NF T51-525-1979 塑料.液态或固态未聚合环氧树脂.挥发物质常规含量的测定 (PLASTICS. SOLID OR LIQUID UNPOLYMERIZED EPOXY RESINS. DETERMINATION OF VOLATILE MATTER.)
NF T51-527-1985 塑料.环氧树脂.性能的测定 (PLASTICS. EPOXIES. DETERMINATION OF PROPERTIES.)
NF T51-530-1997 塑料.环氧树脂用硬化剂和促凝剂.酸酐中自由酸的测定(欧洲标准EN ISO 7327) (PLASTICS. HARDENERS AND ACCELERATORS FOR EPOXIDE RESINS. DETERMINATION OF FREE ACID IN ACID ANHYDRIDE. (EUROPEAN STANDARD EN ISO 7327).)
NF T51-541-1982 塑料.粉状聚乙烯对苯二甲酸酯.水分的测定 (PLASTICS. POLY(ETHYLENE TEREPHTALATE) GRANULES. DETERMINATION OF WATER CONTENT.)
NF T51-542-1987 塑料.粘度值和限定粘度值测定.第5部分:聚对苯二酸亚烃酯 (PLASTICS. DETERMINATION OF VISCOSITY NUMBER AND LIMITING VISCOSITY NUMBER. PART 5 : POLY(AKYLENE TEREPHTALATES).)
NF T51-550-1-1998 塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和标识 (PLASTICS. POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS. PART 1 : REQUIREMENTS AND DESIGNATION. (EUROPEAN STANDARD EN ISO 13000-1).)
NF T51-550-2-1998 塑料.聚四氟乙烯(PTFE)半成品.第2部分:试样的制备和特性的测定 (PLASTICS. POLYTETRAFLUOROETHYLENE (PFTE) SEMI-FINISHED PRODUCTS. PART 2 : PREPARATION OF SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 13000-2).)
NF T51-551-1987 塑料.粘度值和限定粘度值测定.第4部分:聚碳酸酯(PC)模制和挤压材料 (PLASTICS. DETERMINATION OF VISCOSITY NUMBER AND LIMITING VISCOSITY NUMBER. PART 4 : POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS.)
NF T51-553-1-1999 塑料.含氟聚合物的分散、模塑和挤制材料.第1部分:名称与符号系统及基本规范 (PLASTICS. FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS. PART 1 : DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (EUROPEAN STANDARD EN ISO 12086-1).)
NF T51-553-2-1999 塑料.含氟聚合物的分散、模塑和挤制材料.第2部分:试样制备和性能测定 (PLASTICS. FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 12086-2).)
NF T51-560-1990 塑料.熔融状态下流变特性的测定.毛细管流变仪法 (PLASTICS. DETERMINATION OF THE RHEOLOGICAL CHARACTERISTICS IN THE MOLTEN STATE. CAPILLARU RHEOMETER METHOD.)
NF T51-620-1971 塑料.聚丙烯和复合聚丙烯热流动指数的测定 (DETERMINATION OF THE MELT FLOW INDEX OF POLYPROPYLENE AND POLYPROPYLENE COMPOUNDS.)
NF T51-621-2000 塑料.用毛细管和偏振光显微镜测定半晶体聚合物的熔化特性(熔化温度或熔化范围) (Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods.)
NF T51-624-1987 塑料.聚丙烯(PP)和丙烯共聚物热塑塑料.全同指数测定 (PLASTICS. POLYPROPYLENE (PP) AND PROPYLENE-COPOLYMER THERMOPLASTICS. DETERMINATION OF ISOTACTIC INDEX.)
NF T51-659-2-1998 塑料.烟雾产生.第2部分:用单燃烧室试验测定光密度 (Plastics. Smoke generation. Part 2 : determination of optical density by a single-chamber test.)
NF T51-701-2002 塑料.氯乙烯均聚物和共聚物树脂.使用喷气式筛滤器械的筛析 (Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus.)
NF T51-702-1998 塑料制品.环氧氨硬化剂.对第1、2、3 氨组含氮量的测定 (Plastics. Amine epoxide hardeners. Determination of primary, secondary and tertiary amine group nitrogen content.)
NF T51-705-1998 塑料.浇注性的测定 (Plastics. Determination of pourability.)
NF T51-706-1986 塑料.氯乙烯均聚物和共聚物树脂.残余氯乙烯单体测定.气相色谱法 (PLASTICS. HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORID. DETERMINATION OF RESIDUAL VINYL CHLORID MONOMER. GAS CHROMATOGRAPHIC METHOD.)
NF T51-707-1986 塑料.柔性材料扭刚度测定.第2部分:适用于氯乙烯的均聚物和共聚物塑性化化合物 (PLASTICS. DETERMINATION OF STIFFNESS IN TORSION OF FLEXIBLE MATERIALS. PART 2 : APPLICATION TO PLASTICIZED COMPOUNDS OF HOMOPOLYMERS AND COPOLYMERS OF VINYL CHLORIDE.)
NF T51-710-1986 塑料.聚氯乙烯糊料.使用分离流变化测定表观粘度 (Plastics. Polyvinyl chloride pastes. Determination of apparent viscosity using the severs rheometer.)
NF T51-713-1-2002 塑料.热固粉末模塑复合物试样的喷射模塑成型.第1部分:一般原理和多用途试样的模塑成型 (Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1 : general principles and moulding of multipurpose test specimens.)
NF T51-713-2-2001 塑料.热固粉末注模化合物(PMCs)的试验样品注模.第2部分:小盘 (Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2 : small plates.)
NF T51-730-1972 塑料.通过与增塑剂接触后的转移测定聚乙烯各种介电性能 (PLASTICS. DETERMINATION OF CHANGES IN DIELECTICAL PROPERTIES OF POLYETHYLENE BY MIGRATION DUE TO CONTACT WITH A PLASTICIZED MATERIAL.)
NF T51-731-1980 塑料.乙烯增塑成分.低电压穿透阻力的测定 (Plastics. Plasticized vinyl compounds. Determination of the volume resistivity at low voltage.)
NF T51-750-1981 塑料.氯乙烯均聚物和共聚物树脂.挥发物质(色拾水)的测定 (Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of volatile matter (including water).)
NF T51-770-1979 塑料.浆状聚氯乙烯树脂.浆的制备 (PLASTICS. PVC RESINS FOR PASTES. PREPARATION OF A PASTE.)
NF T51-771-1999 塑料.试验用PVC糊料的制备.溶解方法(EN ISO 11468) (PLASTICS. PREPARATION OF PVC PASTES FOR TEST PURPOSES. DISSOLVER METHOD. (EUROPEAN STANDARD EN ISO 11468).)
NF T51-782-1998 塑料.一般应用的聚氯乙烯的均聚物和共聚物树脂.室温下增塑剂吸收的测定 (Plastics. Homopolymer and copolymer resins of vinyl chloride for general use. Determination of plasticizer absorption at room temperature.)
NF T51-783-1978 塑料.一般用聚氯乙烯树脂.加温时增塑剂凝固的测定 (PVC RESINS FOR GENERAL APPLICATIONS ; DETERMINATION OF ABSORPTION OF PLASTICIZER IN THE HOT STATE.)
NF T51-785-1-1993 塑料.化合物、聚乙烯共聚物基础上的产品、发展到氯化氢的共聚物及高温下的其他酸性产品的倾向性测定.第1部 (PLASTICS. DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES. PART 1 : CONGO RED METHOD.)
NF T51-785-3-2000 塑料.升温条件下基于氯乙烯高聚物和共聚物的化合物和产品放出盐酸和其它酸类产品的趋势测定.第3部分:电导分 (Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperature)
NF T51-785-4-2000 塑料.升温条件下基于氯乙烯高聚物和共聚物的化合物和产品放出盐酸和其它酸类产品的趋势测定.第4部分:电位法 (Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperature)
NF T51-820-1998 塑料.乙烯、醋酸乙烯酯共聚物(EVAC).热固塑料.醋酸乙烯酯含量的测定 (Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content.)
NF T51-831-2003 塑料.用锥形辐射加热器和热电堆探测器进行简单热释放试验 (Plastics - Simple heat release test using a conical radiant heater and a thermopile detector.)
NF T51-901-1981 塑料.气相色层分离法测定聚苯乙烯中苯乙烯单体残留物 (PLASTICS. DETERMINATION OF RESIDUAL STYRENE MONOMER IN POLYSTYRENE BY GAS CHROMATOGRAPHY.)
NF T51-911-2001 塑料.伊兆特(Izod)冲击强度的测定 (Plastics - Determination of Izod impact strength.)
NF T51-914-2002 塑料.环氧树脂和环氧丙基酯.无机氯的测定 (Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine.)
NF T52-100-1980 塑料.聚氨基甲酸酯塑料.聚醚.聚酯.异氰酸盐.试验方法一览表.主要标准 PLASTICS. BASE MATERIALS FOR POLYURETHANES. POLYETHERS,POLYESTERS,ISOCYANATES. LIST OF TEST METHODS. SUMMARY STANDARD.
NF T52-130-2002 塑料.聚氨酯原材料.异氰酸酯的含量测定 (Plastics - Polyurethane raw materials - Determination of isocyanate content.)
NF T52-131-1988 塑料.聚氨基甲酸酯塑料.异氰酸盐密度的测定 (PLASTICS. BASIC MATERIALS FOR POLYURETHANE. DETERMINATION OF THE DENSITY OF ISOCYANATES.)
NF T52-132-1988 塑料.聚氨基甲酸酯塑料.纯异氰酸盐.异氰酸盐功能的测定 (PLASTICS. BASIC MATERIALS FOR POLYURETHANE. PURE ISOCYANATES. DETERMINATION OF ISOCYANATES FUNCTIONS.)
NF T52-133-1988 塑料.聚氨基甲酸酯塑料.原异氰酸盐.异氰酸盐功能的测定 (PLASTICS. BASIC MATERIALS FOR POLYURETHANE. RAW ISOCYANATES. DETERMINATION OF ISOCYANATES FUNCTIONS. “HOT“ METHOD.)
NF T52-134-1979 塑料.聚氨基甲酸酯塑料.远红外光谱法测定二异氰酸二苯乙烯中2,4和2,6-异构体的含量 (PLASTICS. BASIC MATERIALS FOR POLYURETHANES. DETERMINATION OF THE RATIO OF 2,4 AND 2,6 ISOMERS IN THE TOLUYLENE DIISOCYANATE BY INFRA-RED SPECTROSCOPY.)
NF T52-1341-1979 T52-134-79的补充1 ()
NF T52-135-1979 塑料.聚氨基甲酸酯塑料.二异氰酸二苯乙烯中水溶氯含量的测定 (PLASTICS. PRIMARY MATERIALS FOR POLYURETHANES. DETERMINATION OF CHLORIDE HYDROLYSABLE IN DIISOCYANATE TOLYLENE.)
NF T52-136-1979 塑料.聚氨基甲酸酯塑料.二异氰酸二苯乙烯.酸度的测定 (PLASTICS. BASIC MATERIALS FOR POLYURETHANES. TOLUYLENEDIISOCYANATE. DETERMINATION OF ACIDITY.)
NF T52-137-1979 塑料.聚氨基甲酸酯塑料.原二异氰酸盐和改性二异氰酸盐.酸度的测定 (PLASTICS. BASIC MATERIALS FOR POLYURETHANES. RAW OR MODIFIED ISOCYANATES. DETERMINATION OF ACIDITY.)
NF T52-138-1979 塑料.聚氨基甲酸酯塑料.纯二异氰酸盐和原二异氰酸盐中总氯含量的测定 (PLASTICS. BASIC MATERIALS FOR POLYURETHANES. DETERMINATION OF TOTAL CHLORIDE IN PURE AND RAW ISOCYANATES.)
NF T52-139-1979 塑料.聚氨基甲酸酯塑料.原二异氰酸盐中固态物质含量的测定 (RAW MATERIALS FOR POLYURETHANES. DETERMINATION OF THE SEDIMENT IN CRUDE ISOCYANATES.)
NF T52-140-1980 塑料.聚氨基甲酸酯塑料.预聚合物中游离二异氰酸二苯乙烯含量的测定.气相色层分离法 (PLASTICS-BASIC MATERIALS FOR POLYURETHANES. DETERMINATION OF THE FREE TOLYYLENEDIISOCYANATE CONTENT OF PREPOLYMERS GAS CHROMATOGRAPHY METHOD.)
NF T52-151-1979 塑料.聚氨基甲酸酯塑料.聚酯.聚醚和异氰酸盐.加德纳单位颜色目视法测定 (PLASTICS. PRIMARY MATERIALS FOR POLYURETHANES. POLYESTERS,POLYETHERS AND ISOCYANATES. VISUAL ASSESSMENT OF COLORATION IN GARDNER UNITS.)
NF T52-152-1979 聚氨基甲酸乙酯原材料.粗异氰酸盐酯沉淀的测定 (RAW MATERIALS FOR POLYURETHANES. DETERMINATION OF THE SEDIMENT IN CRUDE ISOCYANATES.)
NF T53-002-2-1999 塑料.未增塑聚氯乙烯(PVC-U)模塑和挤制材料.第2部分:试样制备和性能测定 (PLASTICS. UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 1163-2).)
NF T53-003-2-1999 塑料.增塑聚氯乙烯(PVC-P)模塑和挤制材料.第2部分:试样制备和性能测定 (PLASTICS. PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 2898-2).)
NF T53-020-1977 塑料.承压流体管用低密度聚乙烯基成分.规范 (BASED LOW DENSITY POLYTHENE COMPOUNDS FOR PRESSURE PIPELINES. SPECIFICATIONS.)
NF T53-033-2-1999 塑料.丙烯腈/丁二烯/苯乙烯共聚物(ABS)的模塑和挤制材料.第2部分:试样的制备和性能的测定 (PLASTICS. ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 2580-2).)
NF T53-034-2-1999 塑料.耐冲击聚苯乙烯(PS-I)模塑和挤制材料.第2部分:试样的制备和性能的测定 (PLASTICS. IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 2897-2).)
NF T53-035-1981 塑料.无定形热塑塑料模制材料.试件后收缩的测定 (PLASTICS. AMORPHOUS THERMOPLASTIC MOULDING MATERIALS. DETERMINATION OF POST-SHRINKAGE OF TEST SPECIMENS.)
NF T53-036-2-1999 塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和挤制材料.第2部分:试样的制备和性能的测定 (PLASTICS. STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 4894-2).)
NF T53-037-1-2001 塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模制和挤压 (Plastics - Acrylonitrile-styrene-acrylic (ASA), acrylonitrile(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Pa)
NF T53-037-2-1999 塑料.不包括丁二烯改进材料的耐冲击丙烯腈/苯乙烯模塑和挤制材料(ASA,AES,ACS).第2部分:试样的制备和性能的 (PLASTICS. IMPACT-RESISTANT ACRYLONITRILE/STYRENE (ASA, AES, ACS) MOULDING AND EXTRUSION MATERIALS, EXCLUDING BUTADIENE-MODIFIED MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 6402-2).)
NF T53-038-1-1999 塑料.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯(MABS)模塑和挤制材料.第1部分:名称与符号系统及基本规范 (PLASTICS. METHYLMETHACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS. PART 1 : DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (EUROPEAN STANDARD EN ISO 10366-1).)
NF T53-038-2-1999 塑料.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯(MABS)模塑和挤制材料.第2部分:试样制备和性能测定 (PLASTICS. METHYLMETHACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 10366-2).)
NF T53-501-1998 塑料.氨基塑料模塑材料.挥发性物质的测定 (Plastics. Aminoplastic moulding materials. Determination of volatile matter.)
NF T54-004-1978 未增塑聚氯乙烯管和配件.流体输送管的化学稳定性 (UPVC PIPES AND FITTINGS. CHEMICAL RESISTANCE TO FLUIDS.)
NF T54-005-1982 未增塑聚氯乙烯管.耐二氯甲烷性能的测定 (Unplasticized PVC pipes. Determination of the resistance to methylene chloride.)
NF T54-006-2003 塑料管道系统.未增塑聚氯乙烯管.检验规定温度下抗二氯甲烷的试验方法 (Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT).)
NF T54-007-1994 塑料管道系统.压力管和配件的机械接合.在恒定应力下抗拔出性能的试验方法 (THERMOPLASTICS PIPING SYSTMES. END-LOAD BEARING MECHANICAL JOINTS BETWEEN PRESSURE PIPES AND FITTINGS. TEST METHOD FOR RESISTANCE TO PULL-OUT UNDER CONSTANT LONGITUDINAL FORCE. (EUROPEAN STANDARD EN 712).)
NF T54-008-1994 塑料管道系统.配件和聚烯烃压力管的机械接合.在弯曲时内部压力引起的密封性的试验方法 (PLASTICS PIPING SYSTEMS. MECHANICAL JOINTS BETWEEN FITTINGS AND POLYOLEFIN PRESSURE PIPES. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL PRESSURE OF ASSEMBLIES SUBJECTED TO BENDING. (EUROPEAN STANDARD EN 713).)
NF T54-009-1994 热塑料管道系统.压力管和模塑配件的合成橡胶密封环型接合.在无轴向推力时内部流体静力学压力下密封性的试验 (THERMOPLASTICS PIPING SYSTEMS. NON-END-LOAD-BEARING ELASTOMERIC SEALING RING TYPE JOINTS BETWEEN PRESSURE PIPES AND MOULDED FITTINGS. TEST METHOD FOR LEAKIGHTNESS UNDER INTERNAL HYDROSTATIC PRESSURE WITHOUT END THRUST. (EUROPEAN STANDARD EN 714).)
NF T54-010-1994 塑料管道系统.压力管和配件的机械和胶合接合.在包含轴向推力的内部水压下密封性的试验方法 (THERMOPLASTICS PIPING SYSTEMS. END-LOAD BEARING JOINTS BETWEEN SMALL DIAMETER PRESSURE PIPES AND FITTINGS. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL WATER PRESSURE, INCLUDING END THRUST. (EUROPEAN STANDARD EN 715).)
NF T54-012-1995 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头.外部液压条件下防漏密封试验方法 (PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHANICAL JOINTS FOR THERMOPLASTICS PRESSURE PIPING. TEST METHOD FOR LEAKTIGHTNESS UNDER EXTERNAL HYDROSTATIC PRESSURE. (EUROPEAN STANDARD EN 911).)
NF T54-015-1997 塑料管道系统.热塑阀门.抗内压和防泄漏的试验方法 (Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness.)
NF T54-016-1-1999 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第1部分:概述 (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : general.)
NF T54-016-2-1999 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第2部分:管子 (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2 : pipes.)
NF T54-016-3-1999 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第3部分:配件 (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3 : fittings.)
NF T54-016-4-1999 供水用塑料管道系统.未增塑聚氯乙烯.第4部分:管件和附件 (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4 : valves and ancillary equipment.)
NF T54-016-5-1999 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第5部分:系统使用的适用性 (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5 : fitness for purpose of the system.)
NF T54-017-1-1999 建筑物内土壤和废物排放用塑料管道系统(低温和高温).未增塑聚氯乙烯(PVC-U).第1部分:管道、配件和系统的规 (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Part 1: Specifications for pipes, fittings and the system.)
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183] [184] [185] [186] [187] [188] [189] [190] [191] [192] [193] [194] [195] [196] [197]