目录 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN
NF——法国标准化协会目录
编号 中文名称 英文名称
NF T51-023-1999 塑料.密胺甲醛树脂模制件.可提取甲醛含量的测定 Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde.
NF T51-024-1-1997 塑料.硬度测定.第1部分:压球法 Plastics. Determination of hardness. Part 1 : ball indentation method.
NF T51-024-1-2003 塑料.硬度测定.第1部分:压球法 (Plastics - Determination of hardness - Part 1 : ball indentation method.)
NF T51-024-2-1999 塑料.硬度测定.第2部分:洛氏硬度 Plastics. Determination of hardness. Part 2 : Rockwell hardness.
NF T51-025-1999 塑料.增塑剂转移性的测定 Plastics. Determination of migration of plasticizers.
NF T51-026-1998 塑料.氯乙烯均聚物和共聚物.氯含量的测定 Plastics. Vinyl chloride homopolymers and copolymers. Determination of chlorine content.
NF T51-027-1965 塑料.氯乙烯一乙酸乙烯共聚物中醋酸乙烯的测定 PLASTICS. DETERMINATION OF VINYL IN VINYL CHLORIDE ACETATE COPOLYMERS.
NF T51-028-1999 塑料.染料渗出的定量评定 Plastics. Qualitative evaluation of the bleeding of colorants.
NF T51-029-2000 塑料.浸入液态化学试剂中效果测定的试验方法 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals.
NF T51-030-1986 塑料.在沸水中由6型聚酰胺树脂中提取物质的百分比测定 Plastics. Determination of the percentage of extractable materials by boilling water in polyamide 6 (refractometric method).
NF T51-032-1976 塑料.浓缩溶液中聚酰胺树脂的粘度比测定 PLASTICS. DETERMINATION OF VISCOSITY RATIO OF POLYAMIDE RESINS IN CONCENTRATED SOLUTION.
NF T51-034-2-1996 塑料.拉伸性能测定.第2部分:模压和挤压塑料试验条件 Plastics. Determination of tensile properties. Part 2 : test conditions for moulding and extrusion plastics.
NF T51-034-3-1995 塑料.抗拉性能的测定.第3部分:薄膜和薄板材的试验条件 Plastics. Determination of tensile properties. Part 3 : test conditions for films and sheets.
NF T51-034-4-1997 塑料.抗拉性能的测定.第4部分:正交同性和正交异性纤维增强塑料复合材料的试验条件.(欧洲标准EN ISO 527-4) Plastics. Determination of tensile properties. Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites.
NF T51-034-5-1997 塑料.抗拉性能的测定.第5部分:单向纤维增强塑料复合材料的试验条件(欧洲标准EN ISO 527-5) Plastics. Determination of tensile properties. Part 5 : test conditions for unidirectional fibre-reinforced plastic composites.
NF T51-035-1-2001 塑料.摆式冲击强度的测定.第1部分:无仪器冲击试验 Plastics - Determination of Charpy impact strength - Part 1 : non-instrumented impact test.
NF T51-038-1999 塑料.热塑塑料熔体质量流速(MFR)和熔体体积流速(MVR)的测定 Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics.
NF T51-039-1998 塑料.有机溶剂抽提物的测定(传统方法)(欧洲标准 EN ISO 6427) Plastics. Determination of matter extractable by organic solvents (conventional methods).
NF T51-042-1967 塑料.聚氯乙烯树脂.压制产品松散密度的测定 PLASTICS. PVC RESINS. DETERMINATION OF COMPACTED APPARENT BULK DENSITY.
NF T51-043-2003 塑料.氯乙烯均聚物和共聚物树脂.水中筛析 Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water.
NF T51-044-1970 塑料.聚氯乙烯树脂.硫酸灰分的测定 PLASTICS. PVC RESINS. DETERMINATION OF SULPHATED ASH.
NF T51-045-1997 塑料.灰分测定.第5部分:聚氯乙烯 (PLASTICS. DETERMINATION OF ASH. PART 5 : POLY(VINYL CHLORIDE). (EUROPEAN STANDARD EN ISO 3451-5).)
NF T51-045-4-2000 塑料.灰分的测定.第4部分:聚酰胺 (Plastics - Determination of ash - Part 4 : polyamides.)
NF T51-049-1969 塑料.聚酰胺树脂.熔点的测定.毛细管法 (PLASTICS. POLYAMIDE RESINS. DETERMINATION OF MELTING POINT. SO-CALLED CAPILLARY TUBE METHOD.)
NF T51-050-1969 塑料.聚酰胺树脂.“熔点”的测定.凹凸镜法 (PLASTICS. POLYAMIDE RESINS. DETERMINATION OF MELTING POINT. MENISCUS METHOD.)
NF T51-052-1988 塑料.聚合物和共聚物的水扩散.pH值的测定 (PLASTICS. AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS. DETERMINATION OF PH.)
NF T51-053-1968 塑料.聚合物和共聚物的水扩散.-10℃时冷冻和解冻交替作用下稳定性试验 (Plastics. Aqueous dispersions of polymers and copolymers. Freeze-thaw cycle stability test.)
NF T51-054-1968 塑料.聚合物和共聚物的水扩散.105℃时的干提取物 (PLASTICS. AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS. DRY EXTRACT AT 105 DEGREES C.)
NF T51-057-1969 塑料.封闭式碳弧光灯暴露法 (PLASTICS. METHOD OF EXPOSURE TO LIGHT FROM THE ENCLOSED CARBON ARC.)
NF T51-058-1969 塑料.光照下染色牢度的评定 (PLASTICS. ESTIMATE OF COLOUR FASTNESS BY EXPOSURE TO LIGHT.)
NF T51-061-3-2003 塑料.用毛细管粘度计测定稀释溶液中聚合物的粘度.第3部分:聚乙烯和聚丙烯 (Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3 : polyethylenes and polypropylenes.)
NF T51-063-1971 塑料.从微孔产品中排出的固态物质密度测定法 METHODS FOR DETERMINING THE DENSITY AND RELATIVE DENSITY (SPECIFIC GRAVITY) OF PLASTICS EXCLUDING CELLULAR PLASTICS.
NF T51-065-1996 塑料.透明材料光透射率总量的测定.第1部分:单束发射仪器 PLASTICS. DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS. PART 1 : SINGLE-BEAM INSTRUMENT. (EUROPEAN STANDARD EN ISO 13468-1).
NF T51-067-1983 塑料.光学性质 Plastics. Optical properties.
NF T51-068-1983 塑料.取样透明度的测定 Plastics. Determination of transparency of a testpiece.
NF T51-070-1974 塑料.热形变的测定.MARTENS试验 PLASTICS. DETERMINATION OF HEAT DEFORMATION. MARTENS TEST.
NF T51-071-3-1996 塑料.通过氧指数测定其燃烧性.第3部分:高温试验 Plastics. Determination of burning behaviour by oxygen index. Part 3 : elevated-temperature test.
NF T51-072-1993 塑料.与小火源相接的水平及垂直试样燃烧特性的测定 Plastics. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source.
NF T51-073-1977 塑料.塑料燃烧特性.测定烟不透明度的试验方法 PLASTICS.REACTION TO FIRE.TEST METHOD TO MEASURE THE DENSITY OF SMOKE.
NF T51-074-1986 塑料.燃烧特性.炽热丝的试验 Plastics. Fire behaviour. Hot wire test.
NF T51-075-1986 塑料.燃烧特性.针状喷嘴试验 Plastics. Fire behaviour. Needle burner test.
NF T51-076-1998 塑料.立式软薄试样与小火焰源接触的燃烧性能测定(欧洲标准EN ISO 9773) Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source.
NF T51-078-1993 塑料.125mm火源用试样的燃性测定 Plastics. Determination of the combustibility of specimens using a 125 mm flame source.
NF T51-080-1999 塑料.导电塑料电阻的测定 Plastics. Measurement of resistivity of conductive plastics.
NF T51-081-1981 塑料.吸尘性的评定 Plastics : . Evaluation of the tendency to dust collection.
NF T51-082-1999 塑料.聚氯乙烯和有关含氯均聚物和共聚物及其混合物热稳定性的测定.色变法 PLASTICS. DETERMINATION OF THERMAL STABILITY OF POLY(VINYL CHLORIDE), RELATED CHLORINE-CONTAINING HOMOPOLYMERS AND COPOLYMERS AND THEIR COMPOUNDS. DISCOLORATION METHOD. (EUROPEAN STANDARD EN ISO 305).
NF T51-083-1999 塑料.液态或象乳胶或分散体一样的树脂.用布洛克菲文德试验方法测定表面粘度 Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield test method.
NF T51-100-1971 塑料.机械和热机试验及其描述用词汇 PLASTICS. VOCABULARY APPLICABLE TO MECHANICAL AND THERMOMECHANICAL TESTS AND TO THEIR INTERPRETATION.
NF T51-101-1997 塑料.压缩性能的测定 Plastics. Determination of compressive properties.
NF T51-103-1-1997 塑料.蠕变的测定.第2部分:拉申蠕变 Plastics. Determination of creep behaviour. Part 1 : tensile creep.
NF T51-103-1-2003 塑料.蠕变的测定.第1部分:拉伸蠕变 (Plastics - Determination of creep behaviour - Part 1 : tensile creep.)
NF T51-103-2-1997 塑料.蠕变的测定.第2部分:用抗弯负载法测定挠曲蠕变 Plastics. Determination of creep behaviour. Part 2 : flexural creep by three-point loading.
NF T51-103-2-2003 塑料.蠕变的测定.第2部分:用三点负载法测定扰屈蠕变 (Plastics - Determination of creep behaviour - Part 2 : flexural creep by three-point loading.)
NF T51-104-1981 塑料.摆锤扭曲试验 Plastics. Testing with the torsion pendulum.
NF T51-105-1971 塑料.聚氯乙烯.弯曲时常用极限温度的测定(卷绕法) PLASTICS. COLD BEND TEMPERATURE OF FLEXIBLE POLYVINYL CHLORIDE COMPOUND.
NF T51-107-1977 塑料.线性接触磨损和摩擦试验.圆柱体在平面上的滑动 PLASTICS. LINEAR CONTACT. WEAR AND FRICTION TEST. (SLIDING OF A CYLINDER OVER A PLANE).
NF T51-108-1984 塑料.滑动摩擦和磨损.术语定义和一般特性 Plastics. Friction and wear by sliding. Definitions of terms and general characteristics.
NF T51-110 1-1977 塑料.平面对平面磨损和摩擦试验.交替线性摩擦 PLASTICS. PLANE TO PLANE CONTACT WEAR AND FRICTION TEST. ALTERNATING LINEAR FRICTION.
NF T51-110-1975 塑料.平面和平面摩擦磨损试验.反复线性摩擦 WEAR TEST BY MEANS OF FRICTION WITH PLANE TO PLANE CONTACT (FRICTION BY MEANS OF ALTERNATING LINEAR SLIDING).
NF T51-1101-1977 塑料.平面对平面磨损和摩擦试验.交替线性摩擦 (PLASTICS. PLANE TO PLANE CONTACT WEAR AND FRICTION TEST. ALTERNATING LINEAR FRICTION.)
NF T51-111-1997 塑料.拉伸冲击强度测定 Plastics. Determination of tensile-impact strength.
NF T51-113-1976 塑料.耐划痕性能的测定 PLASTICS. DETERMINATION OF THE RESISTANCE TO SCRATCHING.
NF T51-114-1979 塑料.在特定温度下、在温度调节器壳体内机械特性的测定方法 PLASTICS. METHODS FOR DETERMINING MECHANICAL CHARACTERISTICS AT TEMPERATURE SPECIFIED IN A ENCLOSURE WITH REGULATION OF THE TEMPERATURE.
NF T51-115-1982 塑料.耐磨损性测定 PLASTICS. DETERMINATION OF RESISTANCE TO ABRASION.
NF T51-116-1-2000 塑料.硬质塑料击穿性能测定.第1部分:无仪器冲击试验 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1 : non-instrumented impact testing.
NF T51-116-2-2002 塑料.硬质塑料击穿性能的测定.第2部分:仪器冲击试验 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2 : instrumented puncture test.
NF T51-117-1-2003 塑料.动态机械性能的测定.第1部分:一般原理 (Plastics - Determination of dynamic mechanical properties - Part 1 : general principles.)
NF T51-122-1988 塑料.用小试样法测定抗拉性能 PLASTICS. DETERMINATION OF TENSILE PROPERTIES BY USE OF SMALL SPECIMENS.
NF T51-123-1998 塑料.斜撑柱硬度计检验 PLASTICS. VERIFICATION OF SHORE HARDNESS DUROMETERS.
NF T51-140-1974 塑料.低密度聚乙烯混合物.碳黑成分的热解测定 LOW DENSITY POLYTHENE BASED PLASTICS : DETERMINATION OF THE CONTENT OF CARBON BLACK BY PYROLISIS.
NF T51-141-1974 塑料.低密度聚乙烯混合物.碳黑成分的快速测定 LOW DENSITY POLYETHYLENE BASED PLASTICS. DETERMINATION OF THE CONTENT OF CARBON BLACK. (RAPID METHOD).
NF T51-142-1992 塑料.聚乙烯和聚乙烯共聚物.炭黑分散度的估算.试验方法 Plastics. Polyethylene and polyethylene copolymere compounds. Evaluation of the degree of dispersion of carbon black. Test method.
NF T51-143-1974 塑料.聚酰胺载体.石墨碳黑和玻璃纤维成分的测定 PLASTICS. FILLED POLYAMIDES. DETERMINATION OF PERCENTAGES OF GRAPHITE OR CARBON BLACK AND FIBER GLASS.
NF T51-144-1974 塑料.填充聚酰胺.二硫化钼和玻璃纤维百分比的测定 FILLED POLYAMIDES. DETERMINATION OF PERCENTAGES OF MOLYBDENE BISULFIDE AND FIBER GLASS.
NF T51-150-2001 塑料.镉的测定.湿分解法 Plastics - Determination of cadmium - Wet decomposition method.
NF T51-162-1980 塑料.湿热环境暴露法 PLASTICS. METHOD OF EXPOSURE TO DAMP HEAT.
NF T51-167-1999 塑料.增塑剂损耗的测定.活性炭法 Plastics. Determination of loss of plasticizers. Activated carbon method.
NF T51-169-1997 塑料.暴露于直接风化、玻璃过滤的日光风化及使用屈折反光镜对日光增强风化的方法 PLASTICS. METHODS OF EXPOSURE TO DIRECT WEATHERING, TO WEATHERING USING GLASS-FILTERED DAYLIGHT, AND TO INTENSIFIED WEATHERING BY DAYLIGHT USING FRESNEL MIRRORS. (EUROPEAN STANDARD EN ISO 877).
NF T51-170-1998 塑料.环境应力破裂(ESC)测定.恒定-拉伸-应力法 Plastics. Determination of environmental stress cracking (ESC). Constant-tensile-stress method.
NF T51-171-1998 塑料.环境应力破裂(ESC)测定.球或针压痕法 Plastics. Determination of environmental stress cracking (ESC). Ball or pin impression method.
NF T51-173-1998 塑料.聚酰胺.粘度值的测定 Plastics. Polyamides. Determination of viscosity number.
NF T51-174-1998 塑料和硬质橡胶.用硬度计测定压痕硬度[肖氏(SHORE)硬度] Plastics and ebonite. Determination of identation hardness by means of a durometer (Shore hardness).
NF T51-174-2003 塑料和硬质胶.用硬度计测定针入硬度[肖氏(SHORE)硬度] (Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness).)
NF T51-175-1998 塑料.未饱和的聚酯树脂.80℃时的反应性测定(常规方法) Plastics. Unsaturated polyester resins. Determination of reactivity at 80 degrees celsius (conventional method) . (european standard en iso 584).
NF T51-176-1998 塑料.聚酰胺中水含量的测定 Plastics. Polyamides (PA). Determination of water content.
NF T51-177-1998 塑料.环氧树脂的硬化剂和促进剂.第1部分:标识 Plastics. Hardeners and accelerators for epoxide resins. Part 1 : designation.
NF T51-178-1998 塑料.聚酰胺.试样的加速调配 Plastics. Polyamides. Accelerated conditoning of test specimens.
NF T51-180-1986 塑料.循环利用.术语定义 Plastics. Cyclical exposure. Definition of terms.
NF T51-181-1986 塑料.循环利用.处理试验的周期 Plastics. Cyclical exposure. Exposure test cycles.
NF T51-185-1979 塑料.放在玻璃下的塑料在阳光、人工照明、大气作用和其它光线下暴露后颜色和性能变化的测定 PLASTICS. DETERMINATION OF CHANGES IN COLOUR AND VARIATIONS IN PROPERTIES AFTER EXPOSURE TO DAYLIGHT UNDER GLASS,NATURAL WEATHERING,ARTIFICIAL LIGHT OR AT OTHERSEXPOSURES.
NF T51-195-1-2000 塑料.暴露于实验室光源的方法.第1部分:通用指南 Plastics - Methods of exposure to laboratory light sources - Part 1 : general guidance.
NF T51-195-2-1999 塑料.暴露于实验室光源的方法.第2部分:氙弧灯 PLASTICS. METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES. PART 2 : XENON-ARC SOURCES. (EUROPEAN STANDARD EN ISO 4892-2).
NF T51-195-3-1999 塑料.暴露于实验室光源的方法.第3部分:UV荧光灯 PLASTICS. METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES. PART 3 : FLUORESCENT UV LAMPS. (EUROPEAN STANDARD EN ISO 4892-3).
NF T51-196-1980 塑料.冷和干热试验指南 PLASTICS. GUIDE TO COLD AND DRY HEAT TESTS.
NF T51-197-1980 塑料.湿热试验指南 PLASTICS. GUIDE TO DAMP HEAT TESTS.
NF T51-198-1979 塑料.温度快速变化试验指南 PLASTICS. GUIDELINES FOR RAPID TEMPERATURE VARIATION TESTS.-
NF T51-199-1974 塑料:亨利实验结果的统计分析 PLASTICS : STATISTICAL ANALYSIS OF EXPERIMENTAL RESULTS. HENRY TEST.
NF T51-201-1998 塑料.液态树脂.比重计法测定比重 (Plastics. Liquid resins. Determination of density by the pyknometer method.)
NF T51-211-1994 塑料.乳浊态或分散态聚合物/树脂.用确定的切变速率梯度旋转粘度计测量粘度 (Plastics. Polymers/resins in the liquid state or as emulsions or dispersions. Determination of viscosity using a rotational viscometer with defined shear rate.)
NF T51-212-1998 塑料.使用毛细管粘度计测定稀释溶液中聚合物的粘度.第1部分:一般原则 (Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscosimeters. Part 1 : general principles.)
NF T51-220-1976 塑料.聚合物和共聚物的水分散物.白点温度和片成形最低温度的测定 (PLASTICS. AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS. DETERMINATION OF WHITE POINT TEMPERATURE AND MINIMUM FILM-FORMING TEMPERATURE.)
NF T51-222-1982 塑料.温度作用下负荷弯曲度变化的测定 (Plastics. Determination of deflection under load as a function of temperature.)
NF T51-223-1985 塑料.半晶体材料.热分析法测定常规熔点 (PLASTICS. SEMI-CRISTALLINE MATERIALS. DETERMINATION OF THE CONVENTIONAL MELTING TEMPERATURE BY THERMAL ANALYSE.)
NF T51-225-1998 塑料.长时间受热后时间-温度极限值的测定 (Plastics. Determination of time-temperature limits after prolonged exposure to heat.)
NF T51-226-1997 塑料.高聚物的热重分析法(TG).一般原理(欧洲标准EN ISO 11358) (PLASTICS. THERMOGRAVIMETRY (TG) OF POLYMERS. GENERAL PRINCIPLES. (EUROPEAN STANDARD EN ISO 11358).)
NF T51-230-1-2001 塑料.超高分子量聚乙烯模塑和挤塑材料.第1部分:名称与符号体制和基本规范 (Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1 : designation system and basis for specifications.)
NF T51-230-2-1999 塑料.超高分子量聚乙烯模塑和挤制材料.第2部分:试样制备和性能测定 (PLASTICS. ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 11542-2).)
NF T51-250-1976 塑料.醋酸乙烯的聚合物和共聚物的水分散物.溴值的测定 (PLASTICS. AQUEOUS DISPERSIONS OF HOMO AND COPOLYMERS OF VINYL ACETATE. DETERMINATION OF BROMINE NUMBER.)
NF T51-251-1984 塑料.聚合物和共聚物的水分散物.密度的测定 (PLASTICS. AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS. MEASUREMENT OF DENSITY.)
NF T51-252-1984 塑料.聚合物和共聚物的水分散物.表面张力的测定.海浪浸泡动态法 (PLASTICS. AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS. MEASUREMENT OF SUPERFICIAL TENSION DYNAMIC METHOD BY IMMERSION FOIL.)
NF T51-271-1976 在聚物和共聚物的水分散物.筛分法测定颗粒含量 (PLASTICS. AQUEOUS DISPERSIONS OF HOMOPOLYMERS OR COPOLYMERS. DETERMINATION OF PARTICLE CONTENT BY SIEVING.)
NF T51-290-1976 塑性材料.吸湿曲线的测定 (PLASTICS. DETERMINATION OF THE HUMIDITY REGAIN CURVE.)
NF T51-294-1-1998 塑料.热塑材料试样的注模.第1部分:一般原则,多用途注模和棒试样 (PLASTICS. INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS. PART 1 : GENERAL PRINCIPLES, AND MOULDING OF MULTIPURPOSE AND BAR TEST SPECIMENS. (EUROPEAN STANDARD EN ISO 294-1).)
NF T51-294-1/A1-2002 塑料.热塑性材料试样的注模.第1部分:多用途及条形试样的模制和总则 (Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1 : general principles, and moulding of multipurpose and bar test specimens.)
NF T51-294-2-1998 塑料.热塑材料试样的注模.第2部分:小拉伸棒 (PLASTICS. INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS. PART 2 : SMALL TENSILE BARS. (EUROPEAN STANDARD EN ISO 294-2).)
NF T51-294-3-1998 塑料.热塑材料试样的喷射铸造法.第3部分:小板 (PLASTICS. INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS. PART 3 : SMALL PLATES. (EUROPEAN STANDARD EN ISO 294-3).)
NF T51-294-4-2003 塑料.热塑材料试样的注塑法.第4部分:模塑收缩率的测定 (Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.)
NF T51-300-1999 塑料.燃烧试验.标准火源 (PLASTICS. FIRE TESTS. STANDARD IGNITION SOURCES. (EUROPEAN STANDARD EN ISO 10093).)
NF T51-301-1998 塑料.酚醛铸模材料.丙酮溶物质的测定(非铸模状态内材料中的大致树脂含量) (Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state).)
NF T51-351-1985 塑料.灰分比率的测定.未增塑醋酸纤维素 (Plastics. Determination of ash. Unplasticized cellulose acetate.)
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183] [184] [185] [186] [187] [188] [189] [190] [191] [192] [193] [194] [195] [196] [197]