目录 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN
NF——法国标准化协会目录
编号 中文名称 英文名称
NF L43-626-2003 航空航天系列.60度钛合金TI-P64001球形管接头.拉力张线用转动螺套 (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire.)
NF L43-627-2003 航空航天系列.60度钛合金TI-P64001球形管接头.焊接的90度弯头 (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Elbows 90 o, welded.)
NF L43-628-2003 航空航天系列.60度钛合金TI-P64001球形管接头.钢FE-PA13制拉力张线 (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA13.)
NF L43-629-2003 航空航天系列.耐热钢制37度球形管接头.端部焊接的90度弯管接头.英制 (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Elbow 90 o nipples, welded end - Inch series.)
NF L43-630-2003 航空航天系列.耐热钢制37度球形管接头.加螺纹直活管节.英制 (erospace series - Pipe coupling 37 o, spherical, in heat resisting steel - Straight unions, threaded - Inch series.)
NF L43-631-2003 航空航天系列.耐热钢制37度球形管接头.端部焊接的箍.英制 (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - ferrules, welded end - Inch series.)
NF L43-632-2003 航空航天系列.耐热钢制37度管接头.管套组件.英制 (Aerospace series - Pipe coupling, 37 o, in heat resisting steel - Cap assemblies - Inch series.)
NF L43-633-2003 航空航天系列.耐热钢制37度球形管接头.端部焊接的三通接头.英制 (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Tees nipples, welded end - Inch series.)
NF L43-634-2003 航空航天系列.高达21000 kPa的37度球形管接头.英制.技术规范 (Aerospace series - Pipe coupling, 37 o, spherical, up to 21 000 kPa - Inch series - Technical specification.)
NF L43-635-2003 航空航天系列.耐热钢制焊接管接头.90度弯头.英制 (Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbows 90 o - Inch series.)
NF L43-636-2003 航空航天系列.耐热钢制焊接管接头.减速器.英制 (Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series.)
NF L43-637-2003 航空航天系列.耐热钢制焊接管接头.三通管.英制 (Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series.)
NF L43-711-1976 管道连接用V形法兰.外形尺寸 (V BAND COUPLINGS FOR DUCTING AND PIPING. PROFILE DIMENSIONS.)
NF L44-070-1979 空中加油.接头的尺寸特性和功能 (IN-FLIGHT REFUELLING EQUIPMENT. DIMENSIONAL AND FUNCTIONAL CHARACTERISTICS OF CONNECTIONS.)
NF L44-511-1985 飞机的地面供给.小流量接头 (Ground supply. Low flow connection.)
NF L44-512-1973 低压接头.ISO 米制螺纹剖面和BNAE公差 (AIRCRAFT GROUND SUPPLY. LOW PRESSURE CONNECTION. ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES. (RECH.).)
NF L44-514-1975 低压气动起动接头 (Low pressure compressed air starting connections.)
NF L44-515-1989 航空和航天流体装置里的供氧接头 (Aerospace. Gaseous oxygen replenishment for use in fluid systems (old type). Dimensions (inch series).)
NF L44-516-1979 液氧流入接头 (Liquid oxygen replenishment couplings.)
NF L44-517-1980 ISO 米制螺纹剖面和公差低压接头 (Low pressure connections, ISO metric thread profile and tolerances.)
NF L44-518-1990 机舱地面增压试验用接头 (Aircraft. Ground pressure testing connections for pressure cabins. Dimensions (inch series).)
NF L44-519-1984 氧气面罩和氧气源的接头 (Joints for connecting crew member`S regulators masks to oxygen sources.)
NF L44-520-1974 空调用200mm接头 (200 mm air-conditioning connections.)
NF L44-521-1974 空调用130mm接头 (130 mm air-conditioning connections.)
NF L44-532-1977 飞机地面给养.加压饮用水源接头 (AIRCRAFT GROUND SUPPLY. CONNECTIONS FOR DRINKING WATER SUPPLIED UNDER PRESSURE.)
NF L44-540-1974 甲醇水压力供水接头.标定尺寸19mm (Water-methanol pressure connections. Nominal dimension 19 mm.)
NF L44-541-1974 甲醇水压力供水接头.标定尺寸38mm (Water-methanol pressure connections. Nominal dimension 38 mm.)
NF L44-550-1978 润滑油压力注入接头 (Pressure re-oiling connection.)
NF L44-570-1980 飞机地面给养.燃料加压注入接头 (Aircraft ground supply. Pressure refuelling connections.)
NF L44-615-1989 航空和航天.液体系统用的液态氧的.注入接头尺寸(英制) (Aerospace. Gaseous oxygen replenishment for use in fluid systems (new type). Dimensions (inch series).)
NF L45-101-1987 航空和航天.液力、压力补偿或变量输送泵.一般要求 (Aerospace. Hydraulic, pressure compensated, variable delivery pumps. General requirements.)
NF L45-201-1991 航空和航天.恒排量液压马达.总规范 (Aerospace. Constant displacement hydraulic motors. General specifications.)
NF L46-012-1986 环形接头.64C8氧烃橡胶.精确度A验.质量分类 (O-RINGS. FLUOROCARBON RUBBER 64C8. PRECISION CLASS A. QUALITY CLASS 3.)
NF L46-013-1986 环形接头.21A7丙烯丁二烯--晴橡胶.精确度A级.质量3级 (O-RINGS. BUTADIENE ACRYLONITRILE RUBBER 21A7. PRECISION CLASS A. QUALITY CLASS 3.)
NF L46-014-1986 环形接头.20A8丙烯丁二烯-晴橡胶.精确度A级.质量3级 (O-RINGS. BUTADIENE ACRYLONITRILE RUBBER 20A8. PRECISION CLASS A. QUALITY CLASS 3.)
NF L46-015-1987 环形接头.20B8丙烯丁二烯- 晴橡胶.精确度A级.性能3级 (O-RINGS. BUTADIENE ACRYLONITRILE RUBBER 20B8. PRECISION CLASS A. PERFORMANCE CLASS 3.)
NF L46-016-1987 环形接头.41B8丁烯丙烯橡胶.精确度A级.性能3级 (O-RINGS. ETHYLENE-PROPYLENE RUBBER 41B8. PRECISION CLASS A. PERFORMANCE CLASS 3.)
NF L46-017-1998 航空航天系列.O型环.碳氟化合物橡胶(FKM),低压缩装置.硬度80 (Aerospace series. O-rings, in fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD.)
NF L46-018-2002 航空航天系列.管连接件.温度范围:-55℃~ 135 ℃75 IRHD的晴基丁二烯橡胶(NBR)的O型密封圈 (Aerospace series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, temperature range : - 55 oC to + 135 oC.)
NF L46-020-1998 航空航天系列.O型环.碳氟化合物橡胶(FKM),低压缩装置.技术规范 (Aerospace series. O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification.)
NF L46-021-2002 航空航天系列.O形密封环凹槽.尺寸 (Aerospace series - O-ring grooves - Dimensions.)
NF L46-056-1980 三角孔圆丝金属网 (WIRE GAUZE WITH TRIANGULAR APERTURES AND ROUND WIRES.)
NF L46-210-1989 航空和航天.流体装置用环形压板的制造尺寸 (AEROSPACE. “P“ CLAMPS (LOOP CLAMPS) FOR FLUID SYSTEMS. ENVELOPE DIMENSIONS.)
NF L46-211-1988 航空航天.流体系统用奥米加夹紧装置(骑马螺栓).尺寸 (AEROSPACE. OMEGA CLAMPS (SADDLE CLAMPS) FOR FLUID SYSTEMS. DIMENSIONS.)
NF L46-212-1988 航空航天.流体系统用奥米加夹紧装置(中心安装式).尺寸 (AEROSPACE. “Q CLAMPS“ (CENTRE-MOUNTED CLAMPS) FOR FLUID SYSTEMS. DIMENSIONS.)
NF L46-226-2002 航空航天系列.以橡胶垫层钝化的耐腐蚀钢制环形(P型)夹件.尺寸和质量 (Aerospace series - Clamps, loop (“P“ type) in corrosion resisting steel, passivated with rubber crushioning - Dimensions, masses.)
NF L46-227-2002 航空航天系列.有橡胶垫层的铝制环形(P形)夹件.尺寸和质量 (Aerospace series - Clamps, loop (“P“ type) in aluminium alloy with rubber cushioning - Dimensions, masses.)
NF L46-240-2002 航空航天系列.在铝合金中带橡胶垫的固定和移动式支架夹具.尺寸和重量 (Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses.)
NF L46-241-2002 航空航天系列.夹件用橡胶垫层.尺寸、质量 (Aerospace series - Cushion, rubber for clamps - Dimensions, masses.)
NF L46-250-1987 航空和航天.流体系统.管路轴线可调节压块.设计标准和合格试验.米制系列 (AEROSPACE. FLUID SYSTEMS. CLAMP BLOCKS FOR TUBE LINES HAVING AXIAL ALIGNMENT. DESIGN STANDARD AND QUALIFICATION TESTING. METRIC SERIES.)
NF L46-311-1966 飞行器的流体装置.螺纹密封塞.(RECH.) (AIRCRAFT FLUID INSTALLATIONS. SCREWED SEALING PLUGS. (RECH.).)
NF L46-313-1979 径向封塞.ISO 米制螺纹剖面和公差 (SCREWED SEALING PLUGS,RADIAL SEALING. ISO METRIC THREAD PROFILE AND TOLERANCES.)
NF L46-315-1979 轴向密封塞.ISO 米制螺纹剖面和公差 (SCREWED SEALING PLUGS,AXIAL SEALING. ISO METRIC THREAD PROFILE AND TOLERANCES.)
NF L46-322-1980 NFL 40- 104和类似型式接头阳螺纹端用金属保护外壳.ISO 米制螺纹剖面和公差 (PROTECTIVE,METALLIC,CAP,FOR NF L 40-104 MALE FITTINGS AND SIMILAR TYPES. ISO METRIC THREAD PROFILE AND TOLERANCES.)
NF L46-323-1980 保护外壳用弹性垫圈 (FLAT ELASTOMER GASKETS FOR PROTECTIVE CAP.)
NF L46-331-2002 航空航天系列.8°30’钛合金管接头.压合栓 (Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Pressure plugs.)
NF L46-332-2002 航空航天系列.钛合金 8°30’管接头.带动态梁密封端的单头卡套 (Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Ferrules, blind, with dynamic beam seal end.)
NF L46-333-2002 航空航天系列.8°30’钛合金管连接件.带锁紧环的截止管 (Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Blanking plugs with lockring.)
NF L46-334-2002 航空航天系列.8°30’管接头.螺母防护帽 (Aerospace series - Pipe coupling 8 o30’ - Protective caps.)
NF L46-335-2002 航空航天系列.8°30’接头.外螺纹防护栓 (Aerospace series - Pipe coupling 8 o30’ - Protective plugs with external threads.)
NF L46-336-2002 航空航天系列.8°30’接头.内螺纹防护栓 (Aerospace series - Pipe coupling 8 o30’ - Protective caps with internal threads.)
NF L46-341-2002 航空航天系列.钛合金直通垫圈 (Aerospace series - Washers, bulkhead in titanium alloy.)
NF L46-342-2002 航空航天系列.焊接管用钛合金三通垫环 (Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14 000 kPa nominal pressure.)
NF L46-343-2002 航空航天系列.焊接管用钛合金三通垫环.28 000 kPa大气压 (Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure.)
NF L46-344-2002 航空航天系列.耐热钢垫圈 (Aerospace series - Washers in heat resisting steel.)
NF L46-614-2003 航空航天系列.合金钢FE-PA3903制弹簧张力夹 (Aerospace series - Clips, spring tension, in alloy steel FE-PA3903.)
NF L47-120-1949 飞行器的流体装置.贮存箱尺寸公差 (AIRCRAFT FLUID INSTALLATIONS. DIMENSIONAL TOLERANCES FOR TANKS.)
NF L48-105-1977 重力装油孔 (Gravity filling orifices.)
NF L48-110-1974 ISO米制螺纹剖面常用底座和BYAE公差.使用的互换性 (STANDARD FLANGES,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES. IN-SERVICE INTERCHANGEABILITY. (RECH.).)
NF L48-111-1973 使用的互换性.ISO米制螺纹剖面常用底座 (IN-SERVICE INTERCHANGEABILITY. STANDARD FLANGES,ISO METRIC THREAD PROFILE AND TOLERANCES.)
NF L48-120-1948 飞机的流体装置.使用的互换性.注入口 (AIRCRAFT FLUID INSTALLATIONS. IN-SERVICE INTERCHANGEABILITY. REFUELLING FLANGES. (RECH.).)
NF L48-121-1948 飞机的流体装置.贮存箱设备.座口滤网和卡环 (AIRCRAFT FLUID INSTALLATIONS. TANK EQUIPMENT. FILTERS AND RETAINING RINGS.)
NF L48-125-1972 使用的互换性.入口.ISO 螺纹剖面和公差 (IN-SERVICE INTERCHANGEABILITY. REFUELLING FLANGES. (ISO THREAD PROFILE AND TOLERANCES).)
NF L48-130-1948 飞机的流体装置.使用的互换性.燃料计量器、燃料泵等的接管座 (AIRCRAFT FLUID INSTALLATIONS. IN-SERVICE INTERCHANGEABILITY. FLANGES FOR LEVEL INDICATORS,FUEL PUMPS,ETC... (RECH.).)
NF L48-135-1972 燃料计量器、燃料泵等接头的使用互换性(ISO 螺纹剖面和公差) (IN-SERVICE INTERCHANGEABILITY. FLANGES FOR LEVEL INDICATORS,FUEL PUMPS,ETC... (ISO THREAD PROFILE AND TOLERANCES).)
NF L48-210-1948 飞机的流体装置.防护贮存箱座口安装的互换性 (AIRCRAFT FLUID INSTALLATIONS. MOUNTING INTERCHANGEABILITY. FLANGES FOR REINFORCED TANKS. (RECH.).)
NF L48-215-1972 防护贮存箱座口装置的互换性.(ISO 螺纹剖面和公差) (MOUNTING INTERCHANGEABILITY. FLANGES FOR REINFORCED TANKS. (ISO THREAD PROFILE AND TOLERANCES).)
NF L50-001-1992 航空航天系列.飞行器电源特性 (AEROSPACE SERIES. CHARACTERISTICS OF AIRCRAFT ELECTRICAL SUPPLIES. (EUROPEAN STANDARD EN 2282).)
NF L50-050-1996 航空和航天.检验飞机上电缆的敷设 (AEROSPACE SERIES. TESTING OF AIRCRAFT WIRING. (EUROPEAN STANDARD EN 2283).)
NF L50-101-1977 电气器材连接的定位 (MARKING OF CONNECTIONS ON ELECTRICAL EQUIPMENT.)
NF L51-151-1979 直流发电机电压调器.底座安装和和外形尺寸 (VOLTAGE REGULATORS FOR DIRECT CURRENT GENERATORS. OVERALL DIMENSIONS AND METHOD OF FIXING OF BASE.)
NF L51-152-1980 A型电压调整器 (VOLTAGE REGULATOR,TYPE A.)
NF L51-153-1980 B型电压调整器 (VOLTAGE REGULATOR,TYPE B.)
NF L51-154-1980 C型电压调整器 (VOLTAGE REGULATOR,TYPE C.)
NF L51-155-1975 差动电流继电器 (DIFFERENTIAL REVERSE CURRENT RELAYS.)
NF L51-156-1971 逆向电流继电器 (CIRCUIT-BREAKER WITH REVERSE CURRENT TRIP.)
NF L51-157-1966 飞行器电气设备.带馈线保护的差动反向电流继电器 (ELECTRICAL EQUIPMENT FOR AIRCRAFT. DIFFERENTIAL REVERSE CURRENT RELAYS WITH FEEDER PROTECTION.)
NF L51-158-1966 飞行器电气设备.单电源的冲击性过压保护装置 (ELECTRICAL EQUIPMENT FOR AIRCRAFT. VOLTAGE SURGE PROTECTION FOR ONE POWER SOURCE.)
NF L51-159-1966 飞行器电气设备.多路电源的冲击性过压保护装置 (ELECTRICAL EQUIPMENT FOR AIRCRAFT. VOLTAGE SURGE PROTECTION FOR SEVERAL POWER SOURCES.)
NF L51-160-1966 飞行器电气设备.直流发电机馈线保护箱 (ELECTRICAL EQUIPMENT FOR AIRCRAFT. FEEDER PROTECTION HOUSING FOR DIRECT CURRENT GENERATOR.)
NF L51-412-1972 机载变流器.Ⅰ型 (ELECTRIC CONVERTORS FOR AIRCRAFT. TYPE I.)
NF L51-413-1971 机载变流器.Ⅱ型 (ELECTRIC CONVERTORS FOR AIRCRAFT. TYPE II.)
NF L51-414-1974 机载变流器.Ⅲ型 (Electric convertors for aircraft. Type III.)
NF L51-510-1966 飞行器电气设备.交流冲击探测器 (ELECTRICAL EQUIPMENT FOR AIRCRAFT. ALTERNATING CURRENT SURGE DETECTORS.)
NF L51-520-1966 飞行器电气设备.交流网络控制和保护箱 (ELECTRICAL EQUIPMENT FOR AIRCRAFT. HOUSINGS FOR CONTROLS AND PROTECTION OF ALTERNATING NETWORKS.)
NF L51-525-1966 飞行器电气设备.控制和保险箱底座 (ELECTRICAL EQUIPMENT FOR AIRCRAFT. SEATING FOR CONTROL AND PROTECTION HOUSINGS.)
NF L51-710-1966 飞行器用电动机.安装和驱动 (ELECTRIC MOTORS FOR AIRCRAFT. FIXING AND DRIVE.)
NF L52-120-1978 常规用途的铜芯电缆 (GENERAL PURPOSE ELECTRIC CABLES WITH COPPER CORE.)
NF L52-121-1978 常规用途的铜电缆 (GENERAL PURPOSE ELECTRIC CABLES WITH COPPER CONDUCTOR.)
NF L52-125-1978 高温用铜芯电缆 (HEAT-RESISTING ELECTRIC CABLES WITH COPPER CORE.)
NF L52-126-1978 高温用铜电缆 (Heat-resisting electric cables with copper conductor.)
NF L52-127-1978 耐火电缆 (Fire-resisting electric cables.)
NF L52-128-1978 耐火铜电缆 (Fire-resisting electric cables with copper conductor.)
NF L52-210-1966 接地线扁裸线 (FLAT METAL BRAID FOR METALLISATION.)
NF L52-215-1966 接地线圆裸线 (ROUND METAL BRAID FOR METALLISATION.)
NF L52-230-2001 航空航天系列.电缆用铜或铜合金导体.产品标准 (Aerospace series - Copper or copper alloy conductors for electrical cables - Product standard.)
NF L52-250-100-2002 航空航天系列.飞行器用电缆.试验方法.第100部分:总则 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100 : general.)
NF L52-250-201-2002 航空航天系列.飞行器用电缆.试验方法.第201部分:外观检查 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201 : visual examination.)
NF L52-250-202-2002 航空航天系列.飞行器用电缆.试验方法.第202部分:质量 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202 : mass.)
NF L52-250-301-2002 航空航天系列.飞行器用电缆.试验方法.第301部分:每单位长度的欧姆律电阻 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301 : ohmic resistance per unit length.)
NF L52-250-302-2002 航空航天系列.飞行器用电缆.试验方法.第302部分:电压验算试验 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 302 : voltage proof test.)
NF L52-250-303-2002 航空航天系列.飞行器用电缆.试验方法.第303部分:绝缘电阻 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303 : insulation resistance.)
NF L52-250-304-2002 航空航天系列.飞行器用电缆.试验方法.第304部分:表面电阻 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304 : surface resistance.)
NF L52-250-305-2002 航空航天系列.飞行器用电缆.试验方法.第305部分:过载电阻 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305 : overload resistance.)
NF L52-250-401-2002 航空航天系列.飞行器用电缆.试验方法.第401部分:加速老化 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 401 : accelerated ageing.)
NF L52-250-402-2002 航空航天系列.飞行器用电缆.试验方法.第402部分:收缩和剥离 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402 : shrinkage and delamination.)
NF L52-250-403-2002 航空航天系列.飞行器用电缆.试验方法.第403部分:剥离和粘连 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403 : delamination and blocking.)
NF L52-250-404-2002 航空航天系列.飞行器用电缆.试验方法.第404部分:热冲击 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404 : thermal shock.)
NF L52-250-405-2002 航空航天系列.飞行器用电缆.试验方法.第405部分:室温下的弯曲试验 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405 : bending at ambient temperature.)
NF L52-250-406-2002 航空航天系列.飞行器用电缆.试验方法.第406部分:低温弯曲试验 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406 : cold bend test.)
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183] [184] [185] [186] [187] [188] [189] [190] [191] [192] [193] [194] [195] [196] [197]