目录 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN
BS——英国国家标准学会目录
编号 中文名称 英文名称
BS ISO/IEC TR 8802-1-1997 信息技术.电信和系统间的信息交换.地区和大城市网络特殊要求. 地区网络标准的总览 (Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Overview of local area network standards)
BS ISO/IEC TR 9294-1992 信息技术.软件管理导则 (Information technology - Guidelines for the management of software documentation)
BS ISO/IEC TR 9573-11-1992 信息处理.SGML支援设备.SGML使用技术.ISO中央秘书处国际标准和技术报告应用 (Information processing - SGML support facilities - Techniques for using SGML - Application at ISO Central Secretariat for International Standards and Technical Reports)
BS ISO/IEC TR 9573-13-1991 信息处理.SGML支持设施.SGML使用技术.数学和科学公共实体集 (Information processing - SGML support facilities - Techniques for using SGML - Public entity sets for mathematics and science)
BS ISO/IEC TR 9577-1997 信息技术.系统间的通信和信息交换.网络层协议标识 (Information technology - Protocol identification in the network layer)
BS ISO/IEC TR 9578-1991 信息技术.局部区域网络用通信接口连接器 (Information technology - Communication interface connectors used in local area networks)
BS ISO/PAS 12006-3-2002 建筑物施工.施工作业的信息组织.目标导向的信息交换框架
BS ISO/PAS 12006-3-2002 建筑物施工.施工作业的信息组织.目标导向的信息交换框架 (Building construction - Organization of information about construction works - Framework for object-oriented information exchange)
BS ISO/PAS 17984-2001 机织铺地织物.暴露于热和水中尺寸变化的测定 (Machine-made textile floor coverings - Determination of dimensional changes after exposure to heat and/or water)
BS ISO/TR 10064-4-1999 圆柱齿轮.检验实施标准.第4部分:表面特征和齿轮齿接触模型检验的推荐规程 (Cylindrical gears - Code of inspection practice - Recommendations relative to surface texture and tooth contact pattern checking)
BS ISO/TR 10303-12-1998 工业自动化系统和集成化.产品数据表示和交换.第12部分:说明方法.EXPRESS-I语言参考手册 (Industrial automation systems and integration - Product data representation and exchange - Description methods - The EXPRESS-I language reference manual)
BS ISO/TR 11696-1-2000 着火试验结果反作用的应用.预测内部衬垫和其它建筑产品的着火性能的试验结果的应用 (Uses of reaction to fire test results - Application of test results to predict fire performance of internal linings and other building products)
BS ISO/TR 11696-2-2000 着火试验结果反作用的应用.建筑产品火灾评定 (Uses of reaction to fire test results - Fire hazard assessment of construction products)
BS ISO/TR 12031-2000 缩微照相.变坏依据用明胶合银缩微品的检验 (Micrographics - Inspection of silver-gelatin microforms for evidence of deterioration)
BS ISO/TR 12391-1-2002 气瓶.可再充填的无缝钢瓶.性能试验.基本原理、背景和最后结果 (Gas cylinders - Refillable seamless steel - Performance tests - Philosophy, background and conclusions)
BS ISO/TR 12391-2-2003 储气瓶.可重复充装的无缝钢瓶.性能试验.碎裂性能试验.单调破裂试验 (Gas cylinders - Refillable seamless steel - Performance tests - Fracture performance tests - Monotonic burst tests)
BS ISO/TR 12391-3-2003 储气瓶.可重复充装的无缝钢瓶.性能试验.碎裂性能试验.循环破裂试验 (Gas cylinders - Refillable seamless steel - Performance tests - Fracture performance tests - Cyclical burst tests)
BS ISO/TR 12470-1998 防火试验.试验结果的应用和扩展指南 (Fire resistance tests - Guidance on the application and extension of results)
BS ISO/TR 12765-1999 封闭式管道中液体流量的测量.使用速调超声流量计法 (Measurement of fluid flow in closed conduits - Methods using transit-time ultrasonic flowmeters)
BS ISO/TR 13387-1-2000 防火安全工程.设计目标防火性能概念的应用 (Fire safety engineering - Application of fire performance concepts to design objectives)
BS ISO/TR 13387-2-2000 防火安全工程.设计防火方案和设计火焰 (Fire safety engineering - Design fire scenarios and design fires)
BS ISO/TR 13387-3-2000 防火安全工程.火灾数学模型的验证和评价 (Fire safety engineering - Assessment and verification of mathematical fire models)
BS ISO/TR 13387-4-2000 防火安全工程.燃烧废气的产生和火灾的起始和发展 (Fire safety engineering - Initiation and development of fire and generation of fire effluents)
BS ISO/TR 13387-5-2000 防火安全工程.火焰废气的移动 (Fire safety engineering - Movement of fire effluents)
BS ISO/TR 13387-6-2000 防火安全工程.结构反应和超出起始范围的火焰蔓延 (Fire safety engineering - Structural response and fire spread beyond the enclosure of origin)
BS ISO/TR 13387-7-2000 防火安全工程.检测、激发和灭火 (Fire safety engineering - Detection, activation and suppression)
BS ISO/TR 13387-8-2000 防火安全工程.生命安全.居民的行为、位置和条件 (Fire safety engineering - Life safety - Occupant behaviour, location and condition)
BS ISO/TR 13739-2000 石油产品.船用燃料传输到船上的实施规程的规定方法 (Petroleum products - Methods of specifying practical procedures for the transfer of bunker fuels to ships)
BS ISO/TR 13989-1-2001 圆柱形齿轮、伞齿轮和准双曲面齿轮磨损承载能力的计算.闪蒸温度法 (Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Flash temperature method)
BS ISO/TR 13989-2-2001 圆柱形齿轮、伞齿轮和准双曲面齿轮的磨损承载能力的计算方法.累积温度法 (Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Integral temperature method)
BS ISO/TR 14179-1-2001 齿轮.热容.在温度为95℃时测定齿轮传动热平衡 (Gears - Thermal capacity - Rating gear drives with thermal equilibrium at 95 鳦 sump temperature)
BS ISO/TR 14179-2-2001 齿轮.热容.热荷载能力 (Gears - Thermal capacity - Thermal load carrying capacity)
BS ISO/TR 14696-2000 燃烧试验的反应.用一中间刻度的热释放卡路里仪(ICAL)对材料.产品和组件的燃烧参数的测定 (Reaction to fire tests - Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL))
BS ISO/TR 14697-1998 防火试验.建筑物基底选择指南 (Fire tests - Guidance on the choice of substrates for building products)
BS ISO/TR 16386-2000 ISO液压传动颗粒计数变化的影响.污染控制和过滤器试验标准 (Impact of changes in ISO fluid power particle counting - Contamination control and filter test standards)
BS ISO/TR 19121-2001 地理信息.成像和栅极数据 (Geographic information - Imagery and gridded data)
BS ISO/TR 3666-1999 水的粘度 (Viscosity of water)
BS ISO/TR 5659-3-2000 塑料.烟的产生.用动态流动方法对光密度的测定 (Plastics - Smoke generation - Determination of optical density by a dynamic flow method)
BS ISO/TR 7470-2000 储气瓶阀门出口.标准化过程或使用中的供应目录 (Valve outlets for gas cylinders - List of provisions which are either standardized or in use)
BS ISO/TR 9494-1998 液态原油.自动管线取样.测定烃类液体中水含量的自动取样器性能统计评估 (Petroleum liquids - Automatic pipeline sampling - Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids)
BS ISO/TS 12927-2000 润滑剂、工业油和相关产品(L级).M系列(金属加工).确定规范的指南 (Lubricants, industrial oils and related products (class L) - Family M (metalworking) - Guidelines for establishing specifications)
BS ISO/TS 12928-2000 润滑剂、工业油和相关产品(L级).R系列(临时防腐产品).建立规范导则 (Lubricants, industrial oils and related products (class L) - Family R (products for temporary protection against corrosion) - Guidelines for establishing specifications)
BS ISO/TS 13725-2001 液力传动.液压缸.临界载荷的测定方法 (Hydraulic fluid power - Cylinders - Method for determining the buckling load)
BS ISO/TS 15768-2000 明渠中液体流速的测量.电磁流量计的设计、选择和使用 (Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters)
BS ISO/TS 15769-2001 流体比重测定.明渠和部分填充管里的液体流.多普勒流量计应用导则 (Hydrometric determination - Liquid flow in open channels and partly filled pipes - Guidelines for the application of Doppler-based flow measurements)
BS ISO/TS 16799-2000 滚动轴承.动力额定负荷和额定寿命.基本动力额定负荷计算中的不连续性 (Rolling bearings - Dynamic load ratings and rating life - Discontinuities in the calculating of basic dynamic load ratings)
BS ISO/TS 16922-2002 天然气.添味气体用导则 (Natural gas - Guidelines for odorizing gases)
BS ISO2790-2005 皮带传动.汽车工业及相应皮带轮用V形皮带.尺寸
BS L 103-1971 铝-铜(4.4)-镁(0.8)-硅(0.7)-锰(0.8)合金锻坯和锻件规范(溶液处理和室温时效) (Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8))
BS L 105-1971 铝-铜(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金管规范(溶液处理和室温时效)(壁厚度小于10mm) (Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8))
BS L 109-1971 铝-铜(4.4)-镁(1.5)-锰(0.6)合金铝涂层薄板带材规范(溶液处理和室温时效) (Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6))
BS L 110-1971 铝-铜(4.4)-镁(1.5)-锰(0.6)合金铝涂层薄板材和带材规范(由用户进行溶液处理) (Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6))
BS L 112-1971 铝-镁(0.8)-硅(1)-锰(0.7)合金锻块和锻件规范(溶液处理和沉淀处理)(适用于焊接) (Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7))
BS L 113-1971 铝-镁(0.8)-硅(1)-锰(0.7)合金薄板材和带材规范(溶液处理和沉淀处理)(适用于焊接) (Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7))
BS L 114-1971 铝-镁(0.8)硅(1)-锰(0.7)合金管规范(溶液处理和沉淀处理)(壁厚度小于10mm)(适用于焊接) (Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7))
BS L 115-1971 铝-镁(0.8)硅(1)-锰(0.7)合金板规范(溶液处理,控制拉伸沉淀处理)(厚度小于25mm)(适用于焊接) (Specification for plate of aluminium-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (not exceeding 25 mm thickness) (suitable for welding) (Mg 0.8)
BS L 117-1975 铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:未经液压试验)(厚度小于10mm) (Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28,)
BS L 118-1975 铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:液压试验)(壁厚度小于10mm) (Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr)
BS L 119-1975 铝-铜(5.0)-镍(1.5)-锰(0.5)-钛(0.2)-锆(0.2)-钴(0.2)-锑(0.2)合金铸锭和铸件规范(溶液处理和人工时效) (Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, C)
BS L 154-1977 铝-铜(4)-硅(1)合金铸锭和铸件规范(溶液处理和室温时效) (Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1))
BS L 155-1977 铝-铜(4)-硅(1)合金铸锭和铸件规范(溶液处理和人工时效) (Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1))
BS L 158-1978 铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金小公差薄板材和带材规范(溶液处理和室温时效) (Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8))
BS L 159-1978 铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金小公差薄板材和带材规范(溶液处理和人工时效) (Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8))
BS L 161-1976 铝-锌(5.6)-镁(2.5)-铜(1.6)-锆(0.22)合金自由锻和模锻件规范(溶液处理和人工时效至过老化条件) (Specification - Hand and die forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22))
BS L 162-1976 铝-锌(5.6)-镁(2.5)-铜(1.6)-铬(0.22)合金冷压自由锻件规范(溶液处理和人工时效至过老化条件) (Specification - Cold compressed hand forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22))
BS L 163-1978 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金薄板材和带材规范(溶液处理,冷作压平和室温时效) (Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si)
BS L 164-1978 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金薄板材和带材规范(溶液处理和室温时效) (Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8))
BS L 165-1978 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金薄板材和带材规范(溶液处理和人工时效) (Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8))
BS L 166-1978 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金紧公差薄板材和带材规范(溶液处理和室温时效) (Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.)
BS L 167-1978 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰合金紧公差薄板材和带材规范(溶液处理和人工时效) (Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8))
BS L 168-1978 铝-铜(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金棒材和挤压型材规范(溶液处理和人工时效)(直径或较小的截面尺寸小 (Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension))
BS L 169-1986 铝-硅(7)-镁(0.6)合金铸锭和铸件规范(溶液处理和人工时效) (Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and artificially aged) (Si 7, Mg 0.6))
BS L 170-1990 铝-锌(5.6)-镁(2.5)-铜(1.6)-锆(0.2)合金挤压棒材和型材规范(直径或较小截面尺寸小于150mm)(溶液处理和控制 (Specification for extruded bars and sections of aluminium-zinc-copper-chromium alloy (solution treated, controlled stretched and artificially aged) (not exceeding 150 mm diameter or minor sectional di)
BS L 171-1990 铝-锌(5.7)-镁(2.5)-锰(0.5)-铜(0.5)合金锻件规范(锻件或经过退火随后热处理锻件)(直径或较小截面尺寸小于1 (Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (supplied as-forged or annealed for subsequent heat treatment) (not exceeding 150 mm diameter or minor sectional dimension))
BS L 172-1990 铝-锌(5.7)-镁(2.7)-锰(0.5)-铜合金挤压、轧制或模压钢坯规范(BS L 171锻件制造用) (Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings to BS L 171) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014))
BS L 173-1991 冷型铸造用铝-硅-镁合金铸件规范.(过量条件下溶液处理和预处理(T7)) (Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition))
BS L 174-1991 砂型铸造用铝-硅-镁合金铸件规范(过量条件下溶液处理和预处理(T7)) (Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition))
BS L 512-1973 镁-铝(6.0)-锌(1.0)合金棒材和挤压型材规范(直径或较小截面尺寸小于150mm) (Specification for bars and extruded sections of magnesium-6% aluminium-zinc alloy (not exceeding 150 mm diameter or minor sectional dimension) (Al 6.0, Zn 1.0))
BS L 513-1973 镁-铝(6.0)-锌(1.0)合金锻坯和锻件规范 (Specification for forging stock and forgings of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0))
BS L 514-1973 镁-铝(3.0)-锌(0.6)合金锻坯和锻件规范 (Specification for forging stock and forgings of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6))
BS L 515-1973 镁-铝(3.0)-锌(0.3)-锆合金锻坯和锻件规范 (Specification for sheet and strip of magnesium-1)
BS M 22-1949 航空用活性硅胶酸规范 (Specification for silica gel acid activated for aircraft purposes)
BS M 32-1969 航空辅助设备的传动和安装座尺寸规范 (Specification for dimensions of aircraft accessory drives and mounting pads)
BS M 34-1970 射线照相技术的制备和使用范法 (Method of preparation and use of radiographic techniques)
BS M 36-1970 以平底孔为参考标准采用浸没技术的特殊锻件的超声波试验法 (Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard)
BS M 37-1970 金属材料和件的腐蚀检查法 (Method for the etch inspection of metallic materials and components)
BS M 38-1971 航空产品无损检验说明和报告汇编指南 (Guide to compilation of instructions and reports for the in-service non-destructive testing of aerospace products)
BS M 39-1972 宇航材料和件穿透检验法 (Method for penetrant inspection of aerospace materials and components)
BS M 40-1972 用无损试验法测量涂层厚度的方法 (Methods for measuring coating thickness by non-destructive testing)
BS M 42-1972 薄料熔焊和电阻焊接无损试验法 (Methods for non-destructive testing of fusion and resistance welds in thin gauge materials)
BS M 43-1973 飞机分区和参照检修门和面板定位的方法 (Methods of zoning aircraft and referencing access doors and panels)
BS M 44-1974 飞机服务,维修,地勤,安全/危险点等识别的规范 (Specification for identification of aircraft servicing, maintenance, ground handling and safety/hazard points)
BS M 48-1975 航空般天用弹性环形密封圈尺寸规范(英制) (Specification for dimensions of elastomeric toroidal sealing rings for aerospace use - inch series)
BS M 55-1984 航空航天用液压管连接件和管件的回转弯曲试验的方法 (Method for rotary flexure testing of hydraulic tubing joints and fittings for aerospace use)
BS M 56-1985 航空航天用聚四氟乙烯管密度和相对密度的测定方法 (Methods for determination of density and relative density of polytetrafluoroethylene (PTFE) tubing for aerospace applications)
BS M 57-1985 航空航天用聚四氟乙烯高温盘旋状软管组件规范 (Specification for high temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) for aerospace applications)
BS M 58-1986 经过硫酸处理的钛和钛合金阳极涂层规范 (Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process)
BS M 61-1989 液压系统“P“形夹(环形夹)轮廓尺寸规范 (Specification for envelope dimensions of “P“ clamps (loop clamps) for fluid systems)
BS M 62-1987 轴线可调液压系统管道的夹紧座的设计和鉴定规范 (Specification for design and qualification testing of clamp blocks for fluid system tube lines having axial alignment - Metric series)
BS M 64-1987 设备中的液压系统管道“Ω“夹形(鞍形夹)尺寸规范 (Specification for dimensions of omega clamps (saddle clamps) for fluid tubing installations)
BS M 65-1987 液压压力补偿变量泵规范 (Specification for pressure compensated variable delivery hydraulic pumps)
BS M 66-1987 液压系统“O“形夹(中心安装)装置图形符号规范 (Specification for dimensions of ’Q’ clamps (centre-mounted clamps) for fluid systems)
BS M 67-1988 成组货件装置用空运货物搬运装置图形符号规范 (Specification for symbols for the pictorial representation of aircraft cargo handling systems for unit load devices (ULDs))
BS M 68-1992 空中货运设备.马运输用成组货件 (Specification for air cargo unit load devices for transportation of horses)
BS M 69-1993 航空货运设备.航空和航空/陆地联运用货运托盘的规范和试验方法 (Air cargo equipment - Air and air/land cargo pallets - Specification and testing)
BS M 70-1993 航空货运设备.基底受限制的只用于大容量飞行器低舱面的合格的容器 (Air cargo equipment - Base-restrained certified containers exclusively for the lower deck of high-capacity aircraft)
BS M 71-1994 飞机载货设备.行间托盘 (Air cargo equipment - Interline pallets)
BS M 73-1994 飞行器.自动推进式厕所服务车的功能要求 (Aircraft - Self-propelled lavatory-servicing vehicle - Functional requirements)
BS M 74-1994 飞机载货设备..飞机装载设备的基本要求 (Air cargo equipment - Basic requirements for aircraft loading equipment)
BS M 75-1994 航空航天.飞机的解冻和防冻牛顿液.ISO 1型 (Aircraft de-icing/anti-icing Newtonian fluids, ISO type I)
BS M 77-1994 自动推进式解冻和防冻车的功能要求 (Self-propelled de-icing/anti-icing vehicles - Functional requirements)
BS M 78-1995 航空器解冻/防冻非牛顿液体,ISO II型 (Aircraft de-icing/anti-icing non-Newtonian fluids, ISO type II)
BS M 79-1995 航空发动机传输装置规范 (Specification for aircraft engine transport devices)
BS M 80-1995 航空货载设备.宽体航空器主舱面容器/托盘负荷器.功能要求 (Air cargo equipment - Wide body aircraft main deck container/pallet loader - Functional requirements)
BS M 81-1995 飞机.宽体飞机底舱面集装箱/托盘装载机.功能要求 (Air cargo equipment - Wide body aircraft lower deck container/pallet loader - Functional requirements)
BS M 82-1995 航空货运设备.线路间货架网 (Air cargo equipment - Interline pallet nets)
BS M 83-1995 空运货物和地面设备的词汇 (Glossary for air cargo and ground equipment)
BS M 84-1995 航空运输设备.航空运输用鉴定合格的飞行器容器.规范和试验 (Air cargo equipment - Certified aircraft container for air cargo - Specification and testing)
BS M 85-1995 空运货物设备.全方向 额定荷载容量为2225N(5000 1bf)或以上的双头螺栓,悬垂配件的识别 (Air cargo equipment - Identification of double-stud tie-down fittings having an omnidirectional rated load capacity of 22 250 N (5 000 lbf) or above)
BS M 86-1996 空中装运货物设备.空中运输的未经认可的底舱集装箱.规范和试验 (Air cargo equipment. Non-certified lower-deck containers for air transport. Specification and testing)
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183] [184] [185] [186] [187] [188] [189] [190] [191] [192] [193] [194] [195] [196] [197] [198] [199] [200] [201] [202] [203] [204] [205] [206] [207] [208] [209] [210] [211] [212] [213] [214] [215] [216] [217] [218] [219] [220]