目录 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN
API——美国石油学会目录
编号
中文名称
英文名称
ANSI/API 10A-2001 良好粘接用水泥和材料规范(第23版) Specification for Cements and Materials for Well Cementing (Twenty Third Edition)
ANSI/API 10B-3-2004 深水固井水泥成分检测的推荐实施规程
ANSI/API 10D-2001 弓形弹簧铸塑中心化子的规范(第6版) Specification for Bow-Spring Casing Centralizers (Sixth Edition)
ANSI/API 10F-2001 水泥灌浆浮标设备性能试验的推荐实施规程 Recommended Practice for Performance Testing of Cementing Float Equipment
ANSI/API 1104-1999 管道和相关设施的焊接 Welding of Pipelines and Related Facilities
ANSI/API 1107-1992 管道保养焊接规程 Pipeline Maintenance Welding Practices
ANSI/API 1160-2001 危险液体管道的管理系统完整性 Managing System Integrity for Hazardous Liquid Pipeline
ANSI/API 1163-2005 在线检查系统合格标准(第1版)
ANSI/API 13M-2004 完井液体粘性测量的推荐规程
ANSI/API 14A-2005 井下安全阀设备的规范
ANSI/API 2000-1992 通风大气式低压贮罐 Venting Atmospheric and Low-Pressure Storage Tanks (Nonrefrigerated and Refrigerated)
ANSI/API 2015-2001 石油贮罐的安全入口和清洗 Safe Entry and Cleaning of Petroleum Storage Tanks
ANSI/API 2510-1996 船上及输油管总站、天然气加工厂、炼油厂、石油化工厂及油罐区的液化石油气装置的设计及制造 Design and Construction of LPG Installations
ANSI/API 2530 Part 1-1991 天然气流体测量.同心,方边,有孔测量仪.第1部分:通用方程式和不确定性指南 Natural Gas Fluids Measurement - Concentric, Square-Edged Orifice Meters, Part 1 - General Equations and Uncertainty Guidelines
ANSI/API 2530 Part 2-1991 天然气流体测量.同心,方边,有孔测量仪.第2部分:安装要求和规范 Natural Gas Fluids Measurement - Concentric, Square-Edged Orifice Meters, Part 2 - Specification and Installation Requirements
ANSI/API 2530 Part 3-1991 石油测量标准手册.第14章:天然气流体测量.第3节:同心,方边,有孔测量仪.第3部分:天然气应用 Manual of Petroleum Measurement Standards, Chapter 14 - Natural Gas Fluids Measurement, Section 3 - Concentric, Square-Edged Orifice Meters, Part 3 - Natural Gas Applications
ANSI/API 2610-1994 油库和贮罐设备的设计、建造、操作、维护和检查 Design, Construction, Operation, Maintenance and Inspection of Terminal and Tank Facilities
ANSI/API 520-1992 炼油厂中减压设备的定尺寸、选择和安装.第1部分:定尺寸和选择 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries - Part I, Sizing and Selection
ANSI/API 521-1992 减压系统导则 Guide for Pressure-Relieving and Depressuring Systems
ANSI/API 527-1991 安全阀的阀座紧密性 Seat Tightness of Safety Relief Valves
ANSI/API 530-5THEDITION-2003 石油和天然气工业.炼油厂中加热器管厚度的计算 (Petroleum and natural gas industries - Calculation of heater-tube thickness in petroleum refineries )
ANSI/API 541-1996 250马力以上鼠笼式模绕感应电动机 Form-Wound Squirrel-Cage Induction Motors 250 Horsepower and Larger
ANSI/API 541-2003 250马力及以上的鼠笼式模绕感应电动机 (Form-Wound Squirrel-Cage Induction Motors 250 Horsepower and Larger )
ANSI/API 551-1992 炼油工艺测量仪器 Refinery Process Measurement Instrumentation
ANSI/API 560-1996 一般炼油厂用火加热器 Fired Heaters for General Refinery Services
ANSI/API 572-1992 压力容器的检验 Inspection of Pressure Vessels
ANSI/API 573-1992 燃火式锅炉和加热炉的检验 Inspection of Fired Boilers and Heaters
ANSI/API 573-2003 裂解炉和加热炉的检验 (Inspection of Fired Boilers and Heaters )
ANSI/API 576-1992 减压设备的检验 Inspection of Pressure Relieving Devices
ANSI/API 580-2002 风险基检验 (Risk-Based Inspection )
ANSI/API 589-1993 阀门包装材料的防火试验 Fire Test for Evaluation of Valve Stem Packing
ANSI/API 603-2001 150级,铸铁,耐腐蚀,法兰端阀门 Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves
ANSI/API 607-1993 软座式直角回转阀的防火实验 Fire Test for Soft-Seated Quarter-Turn Valves
ANSI/API 608-1995 对焊和法兰端金属球阀 Metal Ball Valves - Flanged and Butt-Welding Ends
ANSI/API 608-2002 对焊和法兰端金属球阀 (Metal Ball Valves - Flanged and Butt-Welding Ends )
ANSI/API 610-1995 一般精炼用离心泵 Centrifugal Pumps for General Refinery Services
ANSI/API 610-2002 一般精炼用离心泵 (Centrifugal Pumps for General Refinery Services )
ANSI/API 612-1995 炼油设备专用蒸汽蜗轮机 Special-Purpose Steam Turbines for Refinery Services
ANSI/API 612-2003 石油、石化和天然气工业.专用蒸汽涡轮机 (Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications )
ANSI/API 614-1999 特殊目的用润滑油、轴封和控制油系统 Lubrication, Shaft-Sealing, and Control-Oil Systems for Special-Purpose Applications
ANSI/API 617-2002 石油、化学和燃气工业设备用轴向和离心式压缩机以及扩管器-压缩机 (Axial and Centrifugal Compressors and Expander-Compressors for Petroleum, Chemical and Gas Industry Services )
ANSI/API 619-2004 石油、石化和天然气工业用旋转式容积式压缩机
ANSI/API 621-2001 金属球形检验阀门的重新调整 Reconditioning of Metallic Gate, Globe, and Check Valves
ANSI/API 660-2001 一般炼油设备用管壳式换热器 Shell-and-Tube Heat Exchangers for General Refinery Services
ANSI/API 662-2001 通用炼油业务用平板热交换器 Plate Heat Exchangers for General Refinery Service
ANSI/API 670-1993 振动、轴向位移及轴承温度监测系统 Vibration, Axial Position, and Bearing Temperature Monitoring Systems
ANSI/API 682-1995 炼油厂和化工厂中离心泵和回转泵的轴密封装置 Shaft Sealing Systems for Centrifugal and Rotary Pumps in Refining and Chemical Services
ANSI/API 682-2002 炼油厂和化工厂中离心泵和回转泵的轴密封装置 (Shaft Sealing Systems for Centrifugal and Rotary Pumps )
ANSI/API 682-2004 泵.离心泵和回转泵的轴密封装置
ANSI/API 8B-2000 起重设备的检验、维护、维修和返工程序的推荐实施规程 Recommended Practice for Procedures for Inspections, Maintenance, Repair, and Remanufacture of Hoisting Equipment
ANSI/API 8B-2003 起重设备的检查、维护、维修和返工程序的推荐实施规程 (Recommended Practice for Procedures for Inspections, Maintenance, Repair, and Remanufacture of Hoisting Equipment )
ANSI/API 8C-2003 钻孔和生产提升设备(PSL1 and PSL2)的规范说明 (Specification for Drilling and Production Hoisting Equipment (PSL1 and PSL2) )
ANSI/API 8C-2005 钻探和生产用提升设备(PSL1 和 PSL2)的规范
ANSI/API 920-1992 压力容器的脆裂防护 Prevention of Brittle Fracture of Pressure Vessels
ANSI/API Bull 6AF 2-1993 在负载下API整体法兰的性能 Capabilities of API Integral Flanges Under Combination of Loading - Phase II
ANSI/API Bull 6J-1992 油田弹性材料的试验指导 Testing of Oilfield Elastomers - A Tutorial
ANSI/API MPMS 14.6-1992 石油测量标准手册.第14章:液化天然气测量.第六节:连续密度测量 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement: Section 6 - Continuous Density Measurement
ANSI/API MPMS 2.2C-2002 用光学三角测量法校正竖直柱形罐 Calibration of Upright Cylindrical Tanks Using the Optical-Triangulation Method
ANSI/API MPMS Chapter 14.3 Part 2-2000 第14章.天然气气体测量.第3节.同心方边孔板流量计.第2部分:规范和安装要求 Chapter 14 - Natural Gas Fluids Measurement, Section 3 - Concentric, Square-Edged Orifice Meters, Part 2 - Specification and Installation Requirements
ANSI/API MPMS14.3.1-2003 通用方程和不确定度指南.同心、四方孔板流量计 (General Equations and Uncertainty Guidelines - Concentric, Square-edged Orifice Meters )
ANSI/API MPMS14.3.3-2003 天然气应用 (Natural Gas Applications )
ANSI/API MPMS2.2C-2002 用光学三角测量法校正竖直柱形罐 (Calibration of Upright Cylindrical Tanks Using the Optical-Triangulation Method )
ANSI/API MPMS2.2E-2004 石油和液化石油产品.卧式柱形油罐的校准.第1部分:人工法
ANSI/API MPMS2.2F-2004 石油和液化石油产品.卧式柱形油罐的校准.第2部分:内部光电测距法
ANSI/API MPMS5.6-2002 用科里奥利仪测量液态烃类 (Measurement of Liquid Hydrocarbons by Coriolis Meters )
ANSI/API RP 11PGT-1992 成套式燃汽涡轮机 Packaged Combustion Gas Turbines
ANSI/API RP 11S 1-1987 电动潜水泵拆卸报告 Electrical Submersible Pump Teardown Report
ANSI/API RP 11S 4-1993 电动潜水泵安装尺寸和选择 Sizing and Selection of Electric Submersible Pump Installations
ANSI/API RP 11S 5-1993 电动潜水泵电缆系统应用的推荐规程 Recommended Practice for Application of Electric Submersible Cable Systems
ANSI/API RP 11S 8-1993 电动潜水泵系统振动 Electric Submersible Pump System Vibrations
ANSI/API RP 11V 5-1989 气体提升装置的操作,保养和故障检修 Operation, Maintenance, and Trouble-Shooting of Gas Lift Installations
ANSI/API RP 11V 6-1992 用注入压力操作阀的连续气体提升装置的设计 Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves
ANSI/API RP 11V 7-1990 气体提升阀门的修理,试验和安装 Repair, Testing and Setting Gas Lift Valves
ANSI/API RP 13G-1991 钻井泥浆报表 Drilling Mud Report Form
ANSI/API RP 14E-1991 近海生产平台管道系统的设计和安装 Design and Installation of Offshore Production Platform Piping Systems
ANSI/API RP 14F-1991 近海生产平台用电气系统的设计和安装 Design and Installation of Electrical Systems for Offshore Production Platforms
ANSI/API RP 16E-1990 钻井控制设备用控制系统设计 Design of Control Systems for Drilling Well Control Equipment
ANSI/API RP 17C-1991 直流管系统 TFL (Through Flowline) Systems
ANSI/API RP 2RD-1998 浮动生产系统(TLPs)和稳定的半潜式钻井平台用提升设备设计的推荐实施规程 Recommended Practice for the Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs)
ANSI/API RP 2T-1997 延伸平台的计划,设计和建造 Planning, Designing and Constructing Tension Leg Platforms
ANSI/API RP 4G-1993 钻井结构的使用和保养 Maintenance and Use of Drilling and Well Servicing Structures
ANSI/API RP 555-2000 过程分析仪 Process Analyzers
ANSI/API RP 578-1999 新的和现存合金管系统的材料检定程序 Material Verification Program for New and Existing Alloy Piping Systems
ANSI/API RP 579-2000 适宜作业 Fitness-for-Service
ANSI/API RP 7A 1-1992 旋转肩部连接的螺纹件试验 Testing of Thread Compound for Rotary Shouldered Connections
ANSI/API RP-500-1998 石油装置用电气设备位置分类的推荐实施规程 Classification of Locations for Electrical Installations at Petroleum Facilities, Recommended Practice for
ANSI/API RP-505-1998 以1级、0区、1区和2区分类的石油装置用电气设备位置分类的推荐实施规程 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2
ANSI/API RP10B-4-2004 大气压力下泡沫水泥浆的制备和试验的推荐规程
ANSI/API RP10D-2-2004 扶正器放置和限动环检验
ANSI/API RP1162-2003 管道操作者的公共注意项 (Public Awareness Programs for Pipeline Operators )
ANSI/API RP17A-2002 水下生产系统的设计和运行推荐实施规程 (Recommended Practice for Design and Operation of Subsea Production Systems )
ANSI/API RP17C-2002 直流送管系统 (TFL (Through Flowline) Systems )
ANSI/API RP17F-2002 水下控制系统规范 (Specification for Subsea Control Systems )
ANSI/API RP5A 5-2005 新套管、管道和平端钻管的现场检验.第7版
ANSI/API RP8B-2005 起重设备的检验、保养、维修和修复
ANSI/API Spec 11C-1988 增强塑料深井泵活塞杆 Reinforced Plastic Sucker Rods
ANSI/API Spec 11P-1989 成套高速可拆式发动机驱动的往复式气体压缩机 Packaged High Speed Separable Engine-Driven Reciprocating Gas Compressors
ANSI/API Spec 12GDU-1990 正二醇型气体脱水装置 Glycol-Type Gas Dehydration Units
ANSI/API Spec 12J-1989 油气分离器 Oil and Gas Separators
ANSI/API Spec 12K-1989 间接型油田加热器 Indirect-Type Oil Field Heaters
ANSI/API Spec 15LR-1990 玻璃纤维低压管线 Low Pressure Fiberglass Line Pipe
ANSI/API Spec 15LT-1993 PVC衬层钢管状制品 PVC Lined Steel Tubular Goods
ANSI/API Spec 16C-1993 阻流和切断设备 Choke and Kill Systems
ANSI/API Spec 16D-1993 钻井井筒控制设备用控制系统 Control Systems for Drilling Well Control Equipment
ANSI/API Spec 2F-1997 停泊链 Mooring Chain
ANSI/API Spec 2H-1993 近海平台管状接头用碳酸锰钢板 Carbon Manganese Steel Plate for Offshore Platform Tubular Joints
ANSI/API Spec 2W-1993 近海结构用热机械控制工艺生产的钢板 Steel Plates for Offshore Structures, Produced by Thermo-Mechanical Control Processing (TMCP)
ANSI/API Spec 2Y-1993 近海结构用淬火和回火钢板 Steel Plates, Quenched-and-Tempered, for Offshore Structures
ANSI/API Spec 5D-1992 钻管 Drill Pipe
ANSI/API SPEC13A-2003 钻井液材料规范 (Specification for Drilling-Fluid Materials )
ANSI/API SPEC17E-2003 水下临时管道及电缆规范 (Specification for Subsea Umbilicals )
ANSI/API SPEC6A-2004 井口和采油树设备的规范
ANSI/API SPEC9A-2004 金属丝绳规范
ANSI/API SPEC9A-2004 金属丝绳规范 (Specification for Wire Rope )
ANSI/SIA PIR-01-2000 SIA无源远红外移动监测标准.增强错误警报预防特性 SIA Passive Infrared Motion Detector Standard - Features for Enhancing False Alarm Immunity
IEV Kapitel 704-1995 国际电工词汇.第704章:信息传送技术 (International Elektrotechnical Vocabulary - Chapter 704: Transmission; identical with IEC 50(704):1993)
[1]