目录 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN
ANSI——美国国家标准学会目录
编号 中文名称 英文名称
ANSI/IEEE 1584-2002 电弧闪光危害计算的实施导则 (Guide for Performing Arc Flash Hazard Calculations )
ANSI/IEEE 1584a-2004 电弧闪光危害计算的的实施指南.修改件
ANSI/IEEE 1585-2002 电压波动的补偿用中等电压(1-35kV)系列电子设备的功能规范指南 (Guide for the Functional Specification of Medium Voltage (1 - 35 kV) Electronic Series Devices for Compensation of Voltage Fluctuations )
ANSI/IEEE 1588-2002 网络测量和控制系统用精密时钟同步协议 (Precision Clock Synchronization Protocol for Networked Measurement and Control Systems )
ANSI/IEEE 1596-1992 可伸缩一致界面(SCI) Scalable Coherent Interface (SCI)
ANSI/IEEE 1596.5-1993 可伸缩一致界面处理机的共享数据格式优化 Shared Data Formats Optimized for Scalable Coherent Interface Processors
ANSI/IEEE 16-2004 轨道车辆的电气和电子控制器具标准
ANSI/IEEE 16-2004 轨道车辆的电气和电子控制器具标准
ANSI/IEEE 1613-2003 电力变电站中通信网络装置的标准环境和检验要求 (Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations )
ANSI/IEEE 1616-2004 机动车工作状态数据记录器(MVEDR)标准
ANSI/IEEE 162-1963 电子数字计算机术语的定义 (Electronic Digital Computers, Definitions of Terms for)
ANSI/IEEE 1620-2004 有机晶体管和材料的特性的试验方法标准
ANSI/IEEE 1621-2004 办公室/用户环境中使用的电子装置的电力控制中的用户接口件标准
ANSI/IEEE 1623-2004 动态电压补偿用中压(1 kV至35 kV)电子分流装置的功能规范指南
ANSI/IEEE 1623-2004 动态电压补偿用中压(1 kV至35 kV)电子分流装置的功能规范指南
ANSI/IEEE 1625-2004 便携式计算机用可再充电电池
ANSI/IEEE 1641-2004 信号和试验定义标准
ANSI/IEEE 1646-2004 电力变电所自动化用标准通讯传输时间性能要求
ANSI/IEEE 165-1977 模拟计算机术语定义 (Analog Computers, Definitions of Terms for)
ANSI/IEEE 166-1977 混合计算机连接件术语的定义 (Hybrid Computer Linkage Components, Definitions of Terms for)
ANSI/IEEE 167A.2-1996 标准传真图.高对比度 (Standard Facsimile Chart - High Contrast (Gray Scale))
ANSI/IEEE 18-2002 并联电力电容器 (Shunt Power Capacitors )
ANSI/IEEE 1802.3-2001 载波检测多址/冲突检测(CSMA/CD)访问方法的一致性测试方法和物理层规范类型10BASE-T MAU的一致性测试第6节 (Conformance Test Methodology for Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Type 10BASE-T MAU Conformance Testing Section 6)
ANSI/IEEE 181-2003 转换、脉冲和有关波形的标准 (Standard on Transitions, Pulses, and Related Waveforms )
ANSI/IEEE 187-1990 无线电接收机.调频和电视广播接收机附加辐射的露天测量方法 (Radio Receivers - Open Field Method of Measurement of Spurious Radiation from Frequency Modulation and Television Broadcast Receivers)
ANSI/IEEE 2001-2002 因特网推荐实施规范.网页工程.内部网/外部网用 (Recommended Practice for Internet Practices - Web Page Engineering - Intranet/Extranet Applications )
ANSI/IEEE 2003-2003 信息技术标准.测量与POSIX标准相适应的试验方法规范和试验方法 实施方法的要求和指南 (Standard for Information Technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standards )
ANSI/IEEE 2003.1-1993 信息技术.测量与POSI一致性的试验方法.系统接口 (Information Technology - Test Methods for Measuring Conformance to POSIX - System Interfaces)
ANSI/IEEE 2003.2-1996 信息技术.测量与POSIX一致性的测试法.第2部分:外壳和实用事务程序 (Information Technology - Test Methods for Measuring Conformance to POSIX - Part 2: Shell and Utilities)
ANSI/IEEE 205-2001 电视标准:荧光信号级的测量 (Standard on Television: Measurement of Luminance Signal Levels)
ANSI/IEEE 208-1995 视频技术.摄像系统分辨率的测量1992技术 (Video Techniques - Measurement of Resolution of Camera Systems 1992 Techniques)
ANSI/IEEE 241-1991 商业建筑物中电力系统(灰皮书) (Electric Power Systems in Commercial Buildings (Gray Book))
ANSI/IEEE 242-2001 工业和商业电力系统的保护和协调的推荐实施规程 (Protection and Coordination of Industrial and Commercial Power Systems, Recommended Practice for)
ANSI/IEEE 252-1995 磁隙有液多相感应电动机的测试程序 Motors Having Liquid in the Magnetic Gap, Test Procedure for Polyphase Induction
ANSI/IEEE 260.1-1993 测量单位制的文字符号(国际单位、常规英寸-磅单位和某些其他单位) Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
ANSI/IEEE 260.1-2004 测量单位用字母符号
ANSI/IEEE 260.3-1993 物理科学和技术中使用的数学信号和符号 Mathematical Signs and Symbols for Use in Physical Sciences and Technology
ANSI/IEEE 260.4-1996 声学量值的字母符号和缩写 Letter Symbols and Abbreviations for Quantities Used in Acoustics
ANSI/IEEE 269-1993 模拟和数字电话机传输性能测试方法 Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets
ANSI/IEEE 269-2002 模拟和数字电话机传输性能测试方法 (Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets )
ANSI/IEEE 275-1993 采用定型缠绕的预绝缘定子线圈的交流电机绝缘系统的热量评定推荐实施规程 Thermal Evaluation of Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils, Recommended Practice for
ANSI/IEEE 277-1995 水泥厂电源配电的推荐实施规程 Recommended Practice for Cement Plant Power Distribution
ANSI/IEEE 280-1985 电学和电气工程中量值的字母符号 Quantities Used in Electrical Science and Electrical Engineering, Letter Symbols for
ANSI/IEEE 290-1980 电耦合器 Electric Couplings
ANSI/IEEE 291-1991 测量30Hz-30GHz正旋连续波电磁场强度的标准方法 Standard Methods for Measuring Electromagnetic Field Strength of Sinusoidal Continuous Waves, 30 Hz to 30 GHz
ANSI/IEEE 292-1969 单自由度抑跳速率陀螺的规范格式 Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate Gyros
ANSI/IEEE 293-1969 单自由度抑跳速率陀螺的试验程序 Test Procedure for Single-Degree-of-Freedom Spring-Restrained Rate Gyros
ANSI/IEEE 295-1969 电子设备电力变压器 Electronics Power Transformers
ANSI/IEEE 300-1988 半导体带电粒子探测器的测试程序 Test Procedures for Semiconductor Charged-Particle Detectors
ANSI/IEEE 301-1988 电离辐射半导体探测器用放大器和前置放大器的测试程序 Amplifiers and Preamplifiers for Semiconductor Detectors for lonizing Radiation, Test Procedures for
ANSI/IEEE 303-1991 一类电机辅助设备.A、B、C和D组第二节定位 Auxiliary Devices for Motors in Class 1 - Groups A, B, C, and D, Division 2 Locations
ANSI/IEEE 304-1977 直流电机绝缘系统的评定和分类的试验程序 Evaluation and Classification of Insulation Systems for DC Machines, Test Procedure for
ANSI/IEEE 308-1992 核电站1E级电力系统的标准 Power Systems for Nuclear Power Generating Stations, Criteria for Class 1E
ANSI/IEEE 309-1970 盖革-弥勒计数器的试验程序 Geiger-Muller Counters, Test Procedure for
ANSI/IEEE 310-1969 参考标准电阻器 Reference-Standard Electrical Resistors
ANSI/IEEE 315-1975 电气和电子图示用图形符号(包括参考标注类的标注文字) Electrical and Electronics Diagrams (including Reference Designation Class Designation Lefters), Graphic Symbols for
ANSI/IEEE 315A-1986 电气和电子图示用图形符号 Electrical and Electronics Diagrams, Graphic Symbols for
ANSI/IEEE 317-1983 核电站安全壳结构的电气穿入件 Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
ANSI/IEEE 32-1972 中性接地装置的标准要求、术语和试验过程 Neutral Grounding Devices, Standard Requirements, Terminology, and Test Procedure for
ANSI/IEEE 323-1984 核电站1E级设备的质量鉴定 Qualifying Class 1E Equipment for Nuclear Power Generating Stations
ANSI/IEEE 325-1996 锗γ射线探测器试验过程 Germanium Gamma-Ray Detectors, Test Procedures for
ANSI/IEEE 334-1994 核电站1E级电动机连续负载质量鉴定 Qualifying Continuous Duty Class IE Motors for Nuclear Power Generating Stations
ANSI/IEEE 336-1985 核装置的电力测试设备和控制设备的安装、检验及试验要求 Installation, Inspection, and Testing Requirements for Power Instrumentation and Control Equipment at Nuclear Facilities
ANSI/IEEE 337-1993 线性单轴摆模拟扭矩平衡式加速测量仪规范格式指南和测试程序 Specification Format Guide and Test Procedure for Linear, Single-Axis, Pendulous, Analog Torque Balance Accelerometer
ANSI/IEEE 338-1987 核电站安全系统周期监督测试的准则 Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
ANSI/IEEE 344-1987 核电站1E设备抗地震合格鉴定的推荐实施规范 Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations, Recommended Practice for
ANSI/IEEE 352-1994 核电站安全系统可靠性分析通用原则指南 Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems
ANSI/IEEE 367-1996 来源于动力故障的感应电压和动力电站潜在升高测定的推荐操作规程 Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault
ANSI/IEEE 376-1975 电磁辐射.脉冲强度和脉冲谱带宽度的测量 Radiation, Electromagnetic - Impulse Strength and Impulse Bandwidth, Measurement of
ANSI/IEEE 377-1980 地面移动通信发射机乱真发射测量 Spurious Emission from Land-Mobile Communication Transmitters, Measurement of
ANSI/IEEE 379-1994 核电站安全系统中简单故障判定的应用 Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems
ANSI/IEEE 382-1996 核电厂电力操作阀组调节器安全相关性能的质量鉴定 Actuators for Power-Operated Valve Assemblies with Safety-Related Functions for Nuclear Power-Plants, Qualification of
ANSI/IEEE 383-1974 核电站1E级电缆型式试验的现场拼接和联接 Type Test of Class 1E Electric Cables, Field Splices, and Connections for Nuclear Power Generating Stations
ANSI/IEEE 384-1992 1E级设备和线路独立性标准 Independence of Class 1E Equipment and Circuits, Criteria for
ANSI/IEEE 386-1995 600V以上配电系统的可分离绝缘连接器系统 Separable Insulated Connector Systems for Power Distribution Systems above 600 V
ANSI/IEEE 387-1995 作为核电站备用电源的柴油发电机装置的标准 Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
ANSI/IEEE 388-1992 电功率转换设备中的变压器和电感线圈 Transformers and Inductors in Electronic Power Conversion Equipment
ANSI/IEEE 389-1996 电子变压器和感应器的试验的推荐操作规程 Recommended Practice for Testing Electronic Transformers and Inductors
ANSI/IEEE 390-1987 脉冲变压器 Pulse Transformers
ANSI/IEEE 393-1991 磁芯测试程序 Magnetic Cores, Test Procedures for
ANSI/IEEE 398-1972 闪烁计数用光电倍增器的标准试验程序和闪烁计数专业词汇 Standard Test Procedures for Photo-Multipliers for Scintillation Counting and Glossary for Scintillation Counting Field
ANSI/IEEE 399-1997 电力系统分析推荐实施规范(棕皮书) Analysis (IEEE Brown Book), Recommended Practice for Power System
ANSI/IEEE 4-1995 高压试验的标准技术 Standard Techniques for High-Voltage Testing
ANSI/IEEE 400-2002 电力电缆系统现场进行直流高压试验的指南 (Direct Voltage Tests on Power Cables in the Field, Guide for Making )
ANSI/IEEE 400.2-2004 使用超低频(VLF)的屏蔽电力电缆系统的现场试验指南
ANSI/IEEE 415-1986 核发电系统的1E级动力系统的预操作试验程序设计指南 Preoperational Testing Programs for Class 1E Power Systems for Nuclear Power Generating Systems, Guide for Planning of
ANSI/IEEE 416-1984 ATLAS试验语言 ATLAS Test Language
ANSI/IEEE 420-2001 核电站用1E级控制板、操纵台及操纵仪表架的设计和鉴定标准 Standard for the Design and Qualification of Class 1E Control Boards, Panels and Racks Used in Nuclear Power Generating Stations
ANSI/IEEE 421.1-1996 同步电机的励磁系统的标准定义 Standard Definitions for Excitation Systems for Synchronous Machines
ANSI/IEEE 421.4-2004 励磁系统规范制订指南
ANSI/IEEE 421.5-1992 动力系统稳定性研究用励磁系统模型的推荐规程 Recommended Practice for Excitation System Models for Power System Stability Studies
ANSI/IEEE 421B-1979 励磁系统同步电机的高电势试验要求 Synchronous Machines, High Potential Test Requirements for Excitation Systems for
ANSI/IEEE 422-1986 发电站电缆系统的设计和安装指南 Design and Installation of Cable Systems in Power Generating Stations, Guide for the
ANSI/IEEE 429-1994 使用额定值6900V和以下的机械用环绕型预绝缘发电机定子的交流电机的密封绝缘系统热评估的推荐实施规范 Recommended Practice for Thermal Evaluation of Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 6900 V and Below
ANSI/IEEE 43-1974 旋转电机绝缘电阻测试的推荐方法 Testing Insulation Resistance of Rotating Machinery, Recommended Practice for
ANSI/IEEE 430-1986 来自架空电力线路和变电站的无线电噪声测量程序 Overhead Power Lines and Substations, Procedures for the Measurement of Radio Noise from
ANSI/IEEE 432-1993 旋转电机绝缘维护指南(5hp-不低于10000hp) Insulation Maintenance for Rotating Electrical Machinery (5 hp to Less Than 10000 hp), Guide for
ANSI/IEEE 433-1974 高压甚低频大型交流旋转电机的绝缘试验推荐规程 Large AC Rotating Machinery with High Voltage at Very Low Frequency, Practice for Insulation Testing of
ANSI/IEEE 434-1973 大型高压电机绝缘系统的功能评定指南 Functional Evaluation of Insulation Systems for Large High-Voltage Machines, Guide for
ANSI/IEEE 436-1991 电子变压器产生电晕(局部放电)的测量指南 Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers
ANSI/IEEE 442-1981 土壤热阻系数测量指南 Soil Thermal Resistivity Measurements, Guide for
ANSI/IEEE 446-1995 工业和商业用的应急和备用电力系统 Emergency and Standby Power Systems for Industrial and Commercial Applications
ANSI/IEEE 45-2002 船上电气设备的推荐实施规范 (Recommended Practice for Electrical Installations on Shipboard )
ANSI/IEEE 450-1994 发电站和变电站的大型铅蓄电池组的维护、试验和更换规程 Maintenance, Testing, and Replacement of Large Lead Storage Batteries for Generating Stations and Substations, Practice for
ANSI/IEEE 460-1988 交流电量转换成直流电量的电测量传感器 Electrical Measuring Transducers for Converting AC Electrical Quantities into DC Electrical Quantities
ANSI/IEEE 463-1994 电解电池线工作区的电气安全规程 Electrical Safety Practices in Electrolytic Cell-Line Working Zones
ANSI/IEEE 473-1985 无线电噪声.电磁场测量(10KHz到10GHz)的推荐实施规范 Radio Noise - Recommended Practice for an Electromagnetic Site Survey (10 kHz to GHz)
ANSI/IEEE 475-1983 辐射场干扰传感器的测量程序 Radiation-Field-Disturbance Sensors, Measurement Procedure for
ANSI/IEEE 48-1996 高压交流电缆终端的标准测试程序和要求 Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations
ANSI/IEEE 484-1996 发电站及变电站用大型铅蓄电池组的设备设计和安装实施规范 Installation Design and Installation of Large Lead Storage Batteries for Generating Stations and Substations, Practice for
ANSI/IEEE 484-2002 发电站及变电站用大型酸性铅蓄电池组设备的设计和安装实施规程 (Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications )
ANSI/IEEE 485-1997 固定应用的铅酸电池尺寸测量的推荐实施规程 Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
ANSI/IEEE 487-1992 发电站用通信设备的线路保护指南 Communication Facilities Serving Electric Power Stations, Guide for the Protection of Wire-Line
ANSI/IEEE 488.1-1987 可编程序设备的数字接口 Digital Interface for Programmable Instrumentation
ANSI/IEEE 488.2-1993 代码、格式、协议和通用命令 Codes, Formats, Protocols, and Common Commands
ANSI/IEEE 495-1986 故障电路指示器的试验指南 Testing Faulted Circuit Indicators, Guide for
ANSI/IEEE 497-2002 核电站用事故监测仪标准 (Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations )
ANSI/IEEE 498-1991 核装置用测量与试验设备的校准及控制要求 Calibration and Control of Measuring and Test Equipment Used in Nuclear Facilities, requirements for the
ANSI/IEEE 499-1997 水泥厂电驱动设备和相关电设备的推荐规程 Cement Plant Electric Drives and Related Electrical Equipment, Recommended Practice for
ANSI/IEEE 502-1985 化石燃料单连接蒸汽炉保护、内锁和控制指南 Fossil-Fueled Unit-Connected Steam Stations, Guide for Protection, Interlocking, and Control of
 
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102]